• 전기학회논문지
• /
• 제62권4호
• /
• pp.523-528
• /
• 2013

In recent years, many efforts are increasingly being made to conserve the natural environment with enhanced emission standards and air quality standards. Also there are various methods necessary to be researched to minimize the emission of air pollutants. In particular, boilers of industrial facilities are major portions of the air pollution. The front duct which needs to be designed to reduce the gases to the electrostatic precipitator requires a bent tube, a reduction/extend tube and an auxiliary equipment, that is, a guide vane. This paper proposes an optimum design of the guide vane by a case study for electrostatic precipitator's flow uniformity. The operating conditions of this study are as follows: BMCR (Boiler Maximum Continuous Rate) and MGR (Maximum Guaranteed Rate) are 75%, 50%, and 30%; turbulent fluid dynamics model is based upon K-${\varepsilon}$ formulation. Presentation of the computed motion of particles is found to be quite useful to predict the precipitator performance by use CFD (Computational Fluid Dynamics).

• 한국수소및신에너지학회논문집
• /
• 제31권3호
• /
• pp.314-321
• /
• 2020

In this work, a preliminary design of an inlet guide vane and runner for developing a 2.5 kW hydraulic turbine was conducted by using computational fluid dynamic analysis. Three-dimensional Reynolds-averaged Navier-Stokes equations with shear stress transport turbulence model were used to analyze the fluid flow in the hydraulic turbine. The hexahedral grid system was used to construct computational domain, and the grid dependency test was performed to obtain the optimal grid system. Velocity triangle diagram considering the flow angles of the inlet guide vane and runner was analyzed to obtain a basic geometry of the inlet guide vane and runner. Through modification of the preliminary design, the hydraulic performances of the turbine have improved under overall drop conditions. Especially, the efficiency and power of the turbine increased by 0.95% and 1.45%, respectively, compared to those of the reference model.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.182-186
• /
• 2011

Ejector-diffuser system has long been used in many diverse fields of engineering applications and it has advantages over other fluid machinery, because of no moving parts and structural simplicity. This system makes use of high-pressure primary stream to entrain the low-pressure secondary stream through pure shear actions between two streams. In general, the flow field in the ejector-diffuser system is highly complicated due to turbulent mixing, compressibility effects and sometimes flow unsteadiness. A fatal drawback of the ejector system is in its low efficiency. Many works have been done to improve the performance of the ejector system, but not yet satisfactory, compared with that of other fluid machinery. In the present study, a mixing guide vane was installed at the inlet of the secondary stream for the purpose of the performance improvement of the ejector system. A CFD method has been applied to simulate the supersonic flows inside the ejector-diffuser system. The present results obtained were validated with existing experimental data. The mixing guide vane effects are discussed in terms of the entrainment ratio, total pressure loss as well as pressure recovery.

• 한국항공우주학회지
• /
• 제44권6호
• /
• pp.512-519
• /
• 2016

FA-50 항공기 보조동력장치는 추력을 제외한 항공기의 동력을 생성하는 장치로 항공기 감항성 유지를 위해 매우 중요한 요소이다. 또한, 보조동력장치의 입구안내익은 로드압축기로 유입되는 공기 유량을 조절하여 적절한 공기량이 보조동력장치 내부로 공급되도록 유도하는 장치이다. 본 논문에서는 FA-50 항공기 보조동력장치 입구안내익 구동기어에서 발생한 문제점을 바탕으로, 발생원인, 고장탐구결과, 설계개선 내용을 기술하였으며, 개선된 연구에 대해 비행시험검증 결과를 함께 소개한다.

• 대한조선학회논문집
• /
• 제41권4호
• /
• pp.9-16
• /
• 2004

In the cavitation tunnel, the first corner playes role for the flow direction to execute 90-degree turn. So, energy loss is serious, and the cavitation phenomena well occur in the guide vane surface. In this paper, the flow in the first corner was numerically calculated. From the calculation result, cavitation phenomena mainly occurred in the suction side of the last guide vane and vicinity that vane and tunnel wall adjoin each other. And bubbles occurred from all guide vanes if the flow velocity in the test section reaches the any critical value. We could analogize with our experience in the water tunnel that bubbles that occurred in time not vanish, and become miniature in the flow although the pressure recover. So, they circulate with flow in the tunnel, and come into view in the test section. Therefore, first corner must be designed for bubbles not to appear in the test section according to the flow condition like velocity and pressure demanded by the experiment. We analyzed flow in case that the first elbow configuration was redesigned and some of the existing guides vanes were eliminated. And we presented that first elbow can be easely designed for the improvement of tunnel performance through the computational analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1975-1980
• /
• 2004

The three-dimensional flow in a turbine nozzle guide vane passage causes large secondary loss through the passage and increased heat transfer on the blade surface. In order to reduce or control these secondary flows, a linear cascade with a contoured endwall configuration was used and changes in the three-dimensional flow field were analyzed and discussed. Measurements of secondary flow velocity and total pressure loss within the passage have been performed by means of five-hole probes. The investigation was carried out at fixed exit Reynolds number of $4.0{\times}10^5$. The objective of this study is to document the development of the three-dimensional flow in a turbine nozzle guide vane cascade with modified endwall. The results show that the development of passage vortex and cross flow in the cascade composed of one flat and one contoured endwalls are affected by the flow acceleration which occurs in contoured endwall side. The overall loss is reduced near the flat endwall rather than contoured endwall.

• 한국추진공학회지
• /
• 제16권4호
• /
• pp.23-32
• /
• 2012

본 연구에서는 가변 안내익과 가변 정익을 가진 압축기가 적용된 소형 터보팬엔진의 통합성능해석법에 대한 연구를 수행하였다. 통합해석을 위해 Isight를 이용하여 엔진성능해석프로그램(NPSS)과 압축기탈 설계점 성능프로그램(STGSTK)을 연계하여 해석할 수 있는 절차 및 연계프로그램을 구축하였다. 각각의 해석프로그램은 실험데이터와 비교하여 타당성을 검증하였다. 이러한 통합 해석법을 적용한 결과 탈설계점에서 요구되는 서지마진을 가지는 가변시스템의 작동 조건을 예측할 수 있었다.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2171-2180
• /
• 1991

본 연구에서는 구심터어빈의 설계시 많이 사용되고 있는 NASA의 안내깃 및 회 전익 손실모델들을 이용하여 PR과 K를 실험에 의존하지 않고 구하는 방법을 제시하고 자 한다. 그리고 이 방법을 가변 안내깃이 존재하거나 없는 가상의 구심터빈에 대하 여 탈설계 성능해석을 하여, 본 방법이 기존에 알려진 실험 현상과 유사한 경향을 보 이는지를 알아보기로 한다. 또한 안내깃이 있는 경우에 대하여 기존의 알려진 탈설 계 성능 예측용 프로그램과의 비교를 통하여 본 연구의 해석방법을 간접적으로 검증하 기로 한다.

• 한국추진공학회지
• /
• 제20권5호
• /
• pp.9-18
• /
• 2016

일반적으로 다단 축류압축기는 부분 부하 조건에서 충분한 운전영역을 확보하기 위해 가변안내깃을 이용한다. 본 연구에서의 해석대상인 다단 축류압축기는 입구에서의 안내깃과 함께 1단과 2단 정익을 가변안내깃으로 하여 운전영역을 확보한다. 따라서 본 연구에서는 정격회전수의 70%와 90% 회전수 조건에서의 가변안내깃의 설치각이 다단 축류압축기의 성능에 미치는 영향에 대해 조사하였다. 다단 축류압축기의 성능은 3차원 정상상태 및 비정상상태 수치해석을 이용하여 확보하였다. 각 해석기법을 통해 확보한 결과를 비교하였으며 내부유동장의 특성을 파악하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.235-240
• /
• 2004

This paper deals with the performance analysis of impulse turbine for owe type wave energy conversion device. Numerical analysis was performed using a commercially-available software FLUENT. This parametric study includes the variation of the setting angle of guide vane. Since parametric study at various flaw coefficients requires tremendous amounts of computing time, two-dimensional cascade flaw approximation was employed to find out optimum principal particulars in rather simple manner. Full three-dimensional calculation was also performed for several cases to confirm the validity of two-dimensional approach. Results were compared to other experimental data, for instance Setoguchi et al (2001)'s extensive set of data, and found to be well demonstrating the usefulness of 2-D analysis. Advantages and disadvantages of each method were also evaluated.