• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.385-390
• /
• 2004

An unique ceramic material produced through unidirectional solidification with eutectic composition of two-phase oxides was introduced recently. This composite material has the microstructure of coupled networks of two single crystals interpenetrate each other without grain boundaries. Depending on this microstructure this material, called Melt Growth Composite (MGC), can sustain its room temperature strength up to 1$700^{\circ}C$ (near its melting point) and offer strong oxidization-resistant ability, making its characteristics quite ideal for the gas turbine application. The research project on MGC started in 2001 with the objective of establishing component technologies for MGC application to the high temperature components of the gas turbine engine. MGC turbine nozzles are expected to improve efficiency of gas turbine. However, reduction of the thermal stress is required since high thermal stress is easily generated in MGC turbine nozzles due to temperature distribution. Firstly, the hollow nozzle shape was optimized to reduce thermal stress using numerical analysis. From the results of the first hot gas flow tests, the thermal stress due to span-wise temperature distribution was required to be reduced, and separated nozzle to three pieces was designed. This was tested in hot gas flow at 140$0^{\circ}C$ level, and temperature distributions on the nozzle surface were obtained and stress field was evaluated.

• Journal of Plant Biology
• /
• 제33권2호
• /
• pp.111-118
• /
• 1990

In order to characterize the chloroplasts of Korean ginseng as a semi-shade plant and radish as a sun plant, effects of growth light intensity on photosynthetic electron transport (PS) activity in chloroplasts and superoxide (O2.-) production in thylakoid membrane by irradiation were investigated. High-light chloroplasts of both plants showed higher PS activities than those grown under ow growth light intensity. High PS II and low PS I activities in ginseng chloroplasts (ratio of PS II/PS I : 1.1) were observed, but radish chloroplasts showed low PS II and high PS I activities (ratio of PS II/PS I : 0.3). PS II activity of both plants was little affected by temperature in range of 15-35$^{\circ}C$. Activities of whole -chain (PS II+I) in ginseng and PS I in radish were increased at high temperature (4$0^{\circ}C$). Preincubation of chloroplasts at 4$0^{\circ}C$ during 30 min, as a mild heat stress, caused rapid decrease in PS II and PS II+I activities of both plants. However PS I activity was not decreased in ginseng and rather increased in radish. O2.- production (NBT reduction) in Mehler reaction in the thylakoid membrane was inhibited by DCMU in both plants. DMBIB inhibited O2.- production in ginseng, but radish was insensitive to DMBIB. Electron flow system in ginseng thylakoid membrane was more susceptible to damage of photooxidation than that of radish.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권12호
• /
• pp.1776-1783
• /
• 2002

A population segregating for the naked neck (Na) gene was used to evaluate its effect on fast growing broilers at heat stress. An experimental stock comparable to those of modern broilers was established by backcrossing to colour synthetic male and female lines. Matings between heterozygous (Na/na) males and females produced normally feathered (na/na), heterozygous (Na/na) and homozygous (Na/Na) chicks for the present study. Day old to seven week old coloured broilers of three genotypes viz. normally feathered (na/na), heterozygous naked neck (Na/na) and homozygous naked neck (Na/Na) were compared for heat dissipation, growth performance, body conformation traits, blood biochemical parameters and carcass traits in tropical climate. In hot climate, naked neck broilers had significantly less body temperature and better heat dissipation capabilities as compared to normal broilers. The naked neck broilers had significantly higher body weight and better feed conversion ratio than na/na broilers. The Na/Na or Na/na broilers exhibited higher giblet yield, blood loss and lower feather mass compared to na/na broilers. The results indicated that the reduction in feather coverage in Na/Na and Na/na broilers facilitates better heat dissipation with lower body temperature, more body weight gain, better FCR and carcass traits compared to normal broilers.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권2호
• /
• pp.211-217
• /
• 2013

A herd of polish lowland local sheep was divided into two equal groups: the first group was kept under an overhead shelter, and the second group was kept in a warm barn. The effect of maintenance on ewe's reproductive performance, survival as well as the growth rate of lambs, and their carcasses quality was investigated. The lack of differences in fertility and prolificacy of ewes as well as in the survival and growth rate between the groups confirmed a good adaptation of $\dot{Z}$ela$\acute{z}$nie$\acute{n}$ska sheep to low temperature. Harsh environmental conditions did not cause a significant decrease of the body weight growth; however, they brought in an (insignificant) reduction of subcutaneous fat thickness and meatiness of the loin part of a lamb's body. The fat content of carcasses obtained from lambs reared under the overhead shelter was significantly lower, with no differences of meat and bones contribution between the groups.

• 소성∙가공
• /
• 제10권4호
• /
• pp.338-346
• /
• 2001

Evaluation of microstructural changes is important for process control during open die forging of heavy ingots. The control of forging parameters, such as shape of the dies, reduction, temperature and sequence of passes, is to maximize the forging effects and to minimize inhomogeneities of mechanical properties. The hot working die steel is produced by using the multistage open die forging. The structure is altered during forging by subsequent Precesses of plastic deformation, recrystallization and grain growth. A numerical analysis using an rigid visco-plastic finite element model was performed to predict microstructural evolution of hot working die steel.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.131-135
• /
• 2001

Evaluation of microstructural changes during open die forging of heavy ingots is important for process control. The objective of the control of forging parameters, such as shape of the dies, reduction, temperature and sequence of passes, is to maximize the forging effects md to minimize inhomogeneities of mechanical properties. The hot working die steel is produced by using the multistage open die forging. The structure is altered during forging by subsequent processes of plastic deformation, recrystallization and grain growth. A numerical analysis using an rigid visco-plastic finite element model was performed to predict microstructural evolution of hot working die steel.

• 한국결정성장학회지
• /
• 제20권2호
• /
• pp.80-84
• /
• 2010

The temperature-programmed reduction of titanium oxide ($TiO_2$) with pure $CH_4$ was used for the preparation of titanium carbide crystallites. The synthesized materials had the different surface areas, indicating that the structural properties of these materials were strong functions of two different heating rates and space velocity employed. The titanium carbide crystallites were active for $NH_3$ decomposition. Since the reactivity varied with changes in the particle size, ammonia decomposition reactivity over the titanium carbides crystallites appeared to be related to the different active species. The reactivities of titanium carbide crystallites were two and three times lower than those of the vanadium and molybdenum carbide crystallites, respectively. These results suggested that the difference in activities might be related to the degree of electron transfer between metals and carbon.

• 한국결정성장학회지
• /
• 제10권1호
• /
• pp.55-61
• /
• 2000

리튬이온전지의 음극재료로서 hard carbon에 PVC를 이용한 탄소를 코팅함으로써 비가역용량 감소와 가역용량 증가 등 전기화학적 특성이 향상되었다. 이러한 특성 향상은 PVC코팅에 의한 표면개질로 대기와의 반응을 억제함에 기인한 것으로 생각되며, 또한 Ni 첨가에 의해 PVC 탄소의 흑연화 정도를 조절할 수 있었으며, 이들과 관련된 전기화학적 특성을 비교 고찰하였다.

• 한국결정성장학회지
• /
• 제22권6호
• /
• pp.269-273
• /
• 2012

Ammonia decomposition over titanium carbides were investigated using eight different samples which have been synthesized by TPR (temperature-programmed reduction) method of titanium oxide ($TiO_2$) with pure $CH_4$. The resulting materials which were synthesized using wo different heating rates and space velocity exhibited the different surface areas. These results indicated that the structural properties of these materials have been related to heating rates and space velocity employed. The titanium carbides prepared in this study proved to be active for ammonia decomposition, and the activity changed with the particle size/surface area. These showed the relationship between ammonia decomposition activity and the different active species. Compared to molybdenum carbide, the titanium carbides were one order of magnitude less active, suggesting the correlation between the activity difference and the degree of electron transfer between metals and carbon in metal carbides.

• 한국유기농업학회지
• /
• 제22권1호
• /
• pp.147-154
• /
• 2014

비닐하우스 내 강제환기가 시금치 노균병 발생에 미치는 영향을 구명하기 위해 비닐하우스에 수직환기팬 및 수평공기순환팬을 각각 설치한 후 밤 동안 환기를 시킨 하우스와 환기팬을 설치하지 않은 하우스에서 시금치를 재배하면서 온도 및 습도의 변화, 시금치 생장정도 및 노균병 발생 정도를 조사하였다. 하우스 내의 온도변화는 각 하우스 별로 큰 차이가 없었으나, 밤 동안 상대습도는 수직강제환기팬을 설치한 하우스가 팬을 설치하지 않은 하우스보다 9.2% 낮게 유지되었다. 파종 60일 후에 조사한 시금치의 개체 당 생체중은 수직강제환기팬을 설치한 하우스에서는 17.8g으로 환기팬을 설치하지 않은 하우스의 10.1g과 비교하여 7.7g 높았다. 노균병은 환기팬을 설치하지 않은 하우스에서는 파종 후 20일부터 발생하기 시작하여 60일 후에는 34.7%의 이병엽률을 보였으나, 수직강제환기처리한 하우스에서는 파종 40일 후부터 발생하기 시작하였으며 60일 후 이병엽률은 4.0%로 매우 낮았다. 야간에 비닐하우스 내 공기를 수직강제환기팬을 이용하여 환기시킨 결과 환기팬을 설치하지 않은 하우스와 비교하여 시금치 수확량은 76.2% 증가되었으며, 노균병 발생은 20일 정도 늦었으며, 88.5% 노균병 발생 억제효과가 있었다.