• 한국패류학회지
• /
• 제1권1호
• /
• pp.24-50
• /
• 1985

왜우렁(Parafossarulus manchouricus)은 우리 나라와 중국대륙(中國大陸), 일본(日本), 대만등지(臺灣等地)에 널리 만연(蔓延)되어 있는 간흡충증(肝吸蟲症)(clonorchiasis)의 원인기생충(原因寄生蟲)인 간흡충(肝吸蟲)(Clonorchis sinensis)의 제일중간숙주(第一中間宿主)로서 Bithyniidae 과(科)에 속(屬)하는 담수권패(淡水卷貝)의 일종(一種)이다. 우리나라의 청평(淸平), 진주(晋州), 군산(群山) 및 일본(日本), 대만등지(臺灣等地)에서 채집(採集)된 왜우렁과 공주지역(公州地域)에서 채집(採集)된 Bithynia(Gabbia) misella, 그리고 미국(美國)의 Michigan 호(湖)와 독일(獨逸)의 Bodensee 근역(近域)에서 채집(採集)된 Bithyniatentaculata를 대상(對象)으로 이들의 산난특성(産卵特性), 형태(形態), 세포학적(細胞學的) 특성(特性), 흡충류(吸蟲類)의 자연감염실태(自然感染實態)와 서식지(棲息地)의 생태등(生態等)을 상호비교관안(相互比較觀案)하여 주로 우리나라에 분포(分布)되어 있는 왜우렁의 패류학적(貝類學的) 근거(根據)를 마련하고저 본(本) 연구(硏究)가 수행(遂行)되었다. 왜우렁의 배양(培養)에 있어 중요(重要)한 요소(要素)는 먹이로서 유패(幼貝)인 경우 Navicula나 Gomphonema와 같은 Benthic diatoms가 필수적(必須的)임을 알았고 알에서 부화(孵化)하여 성패(成貝)가 될 때까지는 54日, 그리고 산난(産卵)할때까지는 약(約) 150日이 소요(所要)됨을 알았다. 왜우렁뿐만 아니라 같은 Bithyniidae科에 속(屬)하는 B.(G.) misella나 B. tentaculata도 년(年) 1회(回) 산난(産卵)함을 보았다. 왜우렁의 패곡(貝穀)에는 나선형(螺線形) 육기(陸起)(spiral ridges)가 있음이 타종(他種)과 구별(區別)되는 점(點)이였고 B.(G.) misella의 성패(成貝)의 크기는 7.5mm를 초과하지 않았다. 왜우렁 유패(幼貝)의 주사전자현징경적(走査電子顯徵鏡的) 관내(觀奈)에서 나선형(螺線形) 주름만이 보였을 뿐이여서 Hydrobiidae科에 속(屬)하는 권원류(卷員類)와는 상이(相異)한 형태(形態)를 나타내었다. 왜우렁의 설치(舌齒)는 B. tentaculata와 비숫한 형태(形態)를 보였으나 B.(G.) misella는 cusps가 일반적으로 크고 날카로웠으며 비교(比較)된 삼종(三種) 모두의 치형(齒型)은 2:1:1:1:2이었다. 또한 한국산(韓國産) 왜우렁과 대만산(臺灣産) 왜우렁에 었어 곡고대곡구비(穀高對穀口比)가 서로 통계학적(統計學的)으로 유의(有意)하게 상이(相異)한 것은 지역적환경(地域的環境)의 차리(差異)때문인 것으로 사료(思料)되었다. 왜우렁의 세포분열상(細胞分裂相)은 타종(他種)과 차리(差異)가 없었으나 염색체수(染色體數)는 B. tentaculata와 마찬가지로 n=17이었고 B.(G.) misella는 n=18이었다. 왜우렁의 핵형(核型)은 지역간(地域間)에 그 차리(差異)를 볼 수 없었으며 성염색체(性染色體)는 확인(確認)할 수 없었다. 왜우렁의 간흡충유충감염율(肝吸蟲幼蟲感染率)은 진주산(晋州産) 0.14%, 군산산(群山産) 1.25%이었으나 청평산(淸平産)에서는 0%였으며, 공주산(公州産) B.(G.) misella 亦是 자열감염(自熱感染)을 인정(認定)할 수 없어 간흡충(肝吸蟲)의 중간숙주(中間宿主)가 될 수 없음을 확인(確認)하였다. 왜우렁의 서식처(棲息處)는 수류(水流)가 완만(緩慢)하거나 정체(停滯)될 수계(水系)였으나 비교적(比較的) 오염(汚染)이 적고 용존산소량(溶存酸素量)이 높은 곳에 서식(棲息)하고 있있으며 서식처(棲息處)의 calcium ion양(量)이 타지역(他地域)보다 월등(越等)히 높았음을 알 수 있었다.

• 농업과학연구
• /
• 제17권1호
• /
• pp.1-8
• /
• 1990

판지(板紙)스럿지 자체(自體)의 사용(使用) 적량(適量)을 보기 위(爲)하여 1,200, 1,600, 2,000Kg/10a을 사용(使用)하였을 경우(境遇)와 판지(板紙)스릿지에 톱밥, 계분(鷄糞) 및 요소(尿素)를 배합(配合)하여 부숙(腐熟)시킨 처리구(處理區)를 대두(大豆)에 시용(施用)했을 때 생육특성(生育特性)과 수량(收量) 및 식물체중(植物體中) 화학성분(化學成分) 함량(含量)을 조사(調査)한 결과(結果) 다음과 같은 결론(結論)을 얻었다. 1. 시용(施用)한 판지(板紙)스럿지 자체(自體)가 토양중(土壤中)에서 분해시(分解時) 발아(發芽)에 지장(支障)을 초래(招徠)하여 결주율(缺株率)이 대조구(對照區)보다 5-9%, 배합(配合)스럿지퇴비(堆肥) 시용시(施用時) 3.6-4.1%가 증가(增加)하였으나, 그 후(後) 생육기(生育期) 전반(全般)에 걸쳐 별(別)다른 지장(支障)이 없는 것으로 나타났다. 그러나, 판지(板紙)스럿지 자체(自體)를 시용(施用)하거나, 배합(配合)스럿지퇴비중(堆肥中)에서 스릿지 함량(含量)이 높고, 부재료(副材料) 함량(含量)이 낮은 배합구(配合區)는 파종(播種)기나 이식기(移植期)에 시용(施用)하는 것은 적합(適合)하지 않다. 2. 생육(生育) 현황(現況)은 판지(板紙)스럿지 자체(自體)와 배합(配合)스럿지퇴비(堆肥) 시용시(施用時) 초장(草長)의 경우(境遇) 초기(初期)에 성장(成長)이 약간(若干) 저조(低調)하였으나, 생육(生育) 후기(後期)에 별(別) 차이(差異)가 없었으며, 최대엽(最大葉)의 엽폭(葉幅) 및 엽장(葉長), 주경절수(主莖節數), 협수등(莢數等)도 대조구(對照區)와 큰 차이(差異)가 없었다. 3. 수량요소(收量要素)에서는, 판지(板紙)스럿지를 1,200, 1,600, 2,000Kg/10a로 증량(增量) 시용(施用)한 결과(結果) 수량(收量)이 증가(增加)하였고, 배합(配合)스릿지퇴비구(堆肥區)에서 협수(莢數) 및 개체당(個體當) 알 수(數)는 판지(板紙)스럿지 양(量)보다 톱밥과 계분(鷄糞) 및 요소(尿素) 함량(含量)이 많은 CS-3구(區)에서 많았고, 100립중(粒重), 1리터 중(重)은 판지(板紙)스럿지 양(量)이 많고 톱밥, 요소(尿素), 계분(鷄糞)이 상대적(相對的)으로 적은 CS-1에서 많았다. 이는 콩의 경우(境遇) 관행(慣行) 시비량(施肥量)에 추가(追加)된 배합(配合)스럿지퇴비중(堆肥中) 질소(窒素) 성분(成分)의 과다(過多) 현상(現象)이 아닌가 추측(推測)된다. 4. 화학성분중(化學成分中)에서 질소(窒素) 함량(含量)은 판지(板紙)스럿지와 배합(配合)스럿지퇴비(堆肥) 시용구(施用區)가 무처리구(無處理區)나 대조구(對照區)보다 현저(顯著)히 많았고, 판지(板紙)스럿지 처리구(處理區) 중(中)에서는 2,000Kg/10a 시용구(施用區)가 전(全) 생육(生育)단계에 걸쳐 높은 수준(水準)이었으며, 배합(配合)스럿지퇴비(堆肥) 시용구(施用區) 간(間)에는 별(別) 차이(差異)가 없었다. 그 외(外) $P_2O_5$, $K_2O$, Ca 및 Mg의 함량(含量) 변화(變化)는 처리(處理)간 차이(差異)가 발견(發見)되지 않았다. 5. 결론적(結論的)으로 볼 때, 판지(板紙)스럿지 자체(自體)의 비효(肥效)는 인정되나, 그 자체(自體)를 사용(使用)할 때, 불균일(不均一)하게 처리(處理)되어 스럿지가 뭉쳐있으면 토양중(土壤中) 분해(分解)가 어렵고, 균일(均一)하게 처리(處理)되여도 급격(急激)한 분해(分解)가 문제(問題)되어 바람직하지 않으며, 적절(適切)한 부재료(副材料)와 C/N율(率)을 조절(調節)하고, 미생물(微生物), 통기성등(通氣性等) 부숙(腐熟) 조건(條件)을 유지(維持)시켜 충분(充分)히 부숙(腐熟)시킨 후(後) 시용(施用)할 때 유기물(有機物) 비료자원(肥料資源)으로 작물(作物)에 처리(處理) 시용(施用) 가능성(可能性)이 있으며, 동시(同時)에 폐기물(廢棄物) 활용(活用) 및 처리(處理) 효과(效果)도 기(期)할 수 있다.

• 항공우주정책ㆍ법학회지
• /
• 제1권
• /
• pp.147-162
• /
• 1989

The current status of the application and interpretation of the Warsaw Convention and its subsequent Protocols in Asian countries is in its fredgling stages compared to the developed countries of Europe and North America, and there is thus little published information about the various Asian governments' treatment and courts' views of the Warsaw System. Due to that limitation, the accent of this paper will be on Korea and Japan. As one will be aware, the so-called 'Warsaw System' is made up of the Warsaw Convention of 1929, the Hague Protocol of 1955, the Guadalajara Convention of 1961, the Guatemala City Protocol of 1971 and the Montreal Additional Protocols Nos. 1,2,3 and 4 of 1975. Among these instruments, most of the countries in Asia are parties to both the Warsaw Convention and the Hague Protocol. However, the Republic of Korea and Mongolia are parties only to the Hague Protocol, while Burma, Indonesia and Sri Lanka are parties only to the Warsaw Convention. Thailand and Taiwan are not parties only to the convention or protocol. Among Asian states, Indonesia, the Phillipines and Pakistan are also parties to the Guadalajara Convention, but no country in Asia has signed the Guatemala City Protocol of 1971 or the Montreal Additional Protocols, which Protocols have not yet been put into force. The People's Republic of China has declared that the Warsaw Convention shall apply to the entire Chinese territory, including Taiwan. 'The application of the Warsaw Convention to one-way air carriage between a state which is a party only to the Warsaw Convention and a state which is a party only to the Hague Protocol' is of particular importance in Korea as it is a signatory only to the Hague Protocol, but it is involved in a great deal of air transportation to and from the united states, which in turn is a party only to the Warsaw Convention. The opinion of the Supreme Court of Korea appears to be, that parties to the Warsaw Convention were intended to be parties to the Hague Protocol, whether they actually signed it or not. The effect of this decision is that in Korea the United States and Korea will be considered by the courts to be in a treaty relationship, though neither State is a signatory to the same instrument as the other State. The first wrongful death claim in Korea related to international carriage by air under the Convention was made in Hyun-Mo Bang, et al v. Korean Air Lines Co., Ltd. case. In this case, the plaintiffs claimed for damages based upon breach of contract as well as upon tort under the Korean Civil Code. The issue in the case was whether the time limitation provisions of the Convention should be applicable to a claim based in tort as well as to a claim based in contract. The Appellate Court ruled on 29 August 1983 that 'however founded' in Article 24(1) of the Convention should be construed to mean that the Convention should be applicable to the claim regardless of whether the cause of action was based in tort or breach of contract, and that the plaintiffs' rights to damages had therefore extinguished because of the time limitation as set forth in Article 29(1) of the Convention. The difficult and often debated question of what exactly is meant by the words 'such default equivalent to wilful misconduct' in Article 25(1) of the Warsaw Convention, has also been litigated. The Supreme Court of Japan dealt with this issue in the Suzuki Shinjuten Co. v. Northwest Airlines Inc. case. The Supreme Court upheld the Appellate Court's ruling, and decided that 'such default equivalent to wilful misconduct' under Article 25(1) of the Convention was within the meaning of 'gross negligence' under the Japanese Commercial Code. The issue of the convention of the 'franc' into national currencies as provided in Article 22 of the Warsaw Convention as amended by the Hague Protocol has been raised in a court case in Korea, which is now before the District Court of Seoul. In this case, the plaintiff argues that the gold franc equivalent must be converted in Korean Won in accordance with the free market price of gold in Korea, as Korea has not enacted any law, order or regulation prescribing the proper method of calculating the equivalent in its national currency. while it is unclear if the court will accept this position, the last official price of gold of the United States as in the famous Franklin Mint case, Special Drawing Right(SDR) or the current French franc, Korean Air Lines has argued in favor of the last official price of gold of the United States by which the air lines converted such francs into us Dollars in their General Conditions of Carriage. It is my understanding that in India, an appellate court adopted the free market price valuation. There is a report as well saying that if a lawsuit concerning this issue were brought in Pakistan, the free market cost of gold would be applied there too. Speaking specifically about the future of the Warsaw System in Asia though I have been informed that Thailand is actively considering acceding to the Warsaw Convention, the attitudes of most Asian countries' governments towards the Warsaw System are still wnot ell known. There is little evidence that Asian countries are moving to deal concretely with the conversion of the franc into their own local currencies. So too it cannot be said that they are on the move to adhere to the Montreal Additional Protocols Nos. 3 & 4 which attempt to basically solve many of the current problems with the Warsaw System, by adopting the SDR as the unit of currency, by establishing the carrier's absolute liability and an unbreakable limit and by increasing the carrier's passenger limit of liability to SDR 100,000, as well as permiting the domestic introduction of supplemental compensation. To summarize my own sentiments regarding the future, I would say that given the fact that Asian air lines are now world leaders both in overall size and rate of growth, and the fact that both Asian individuals and governments are becoming more and more reliant on the global civil aviation networks as their economies become ever stronger, I am hopeful that Asian nations will henceforth play a bigger role in ensuring the orderly and hasty development of a workable unified system of rules governing international commercial air carriage.

• 지능정보연구
• /
• 제26권4호
• /
• pp.127-148
• /
• 2020

데이터 센터는 컴퓨터 시스템과 관련 구성요소를 수용하기 위한 물리적 환경시설로, 빅데이터, 인공지능 스마트 공장, 웨어러블, 스마트 홈 등 차세대 핵심 산업의 필수 기반기술이다. 특히, 클라우드 컴퓨팅의 성장으로 데이터 센터 인프라의 비례적 확장은 불가피하다. 이러한 데이터 센터 설비의 상태를 모니터링하는 것은 시스템을 유지, 관리하고 장애를 예방하기 위한 방법이다. 설비를 구성하는 일부 요소에 장애가 발생하는 경우 해당 장비뿐 아니라 연결된 다른 장비에도 영향을 미칠 수 있으며, 막대한 손해를 초래할 수 있다. 특히, IT 시설은 상호의존성에 의해 불규칙하고 원인을 알기 어렵다. 데이터 센터 내 장애를 예측하는 선행연구에서는, 장치들이 혼재된 상황임을 가정하지 않고 단일 서버를 단일 상태로 보고 장애를 예측했다. 이에 본 연구에서는, 서버 내부에서 발생하는 장애(Outage A)와 서버 외부에서 발생하는 장애(Outage B)로 데이터 센터 장애를 구분하고, 서버 내에서 발생하는 복합적인 장애 분석에 중점을 두었다. 서버 외부 장애는 전력, 냉각, 사용자 실수 등인데, 이와 같은 장애는 데이터 센터 설비 구축 초기 단계에서 예방이 가능했기 때문에 다양한 솔루션이 개발되고 있는 상황이다. 반면 서버 내 발생하는 장애는 원인 규명이 어려워 아직까지 적절한 예방이 이뤄지지 못하고 있다. 특히 서버 장애가 단일적으로 발생하지 않고, 다른 서버 장애의 원인이 되기도 하고, 다른 서버부터 장애의 원인이 되는 무언가를 받기도 하는 이유다. 즉, 기존 연구들은 서버들 간 영향을 주지 않는 단일 서버인 상태로 가정하고 장애를 분석했다면, 본 연구에서는 서버들 간 영향을 준다고 가정하고 장애 발생 상태를 분석했다. 데이터 센터 내 복합 장애 상황을 정의하기 위해, 데이터 센터 내 존재하는 각 장비별로 장애가 발생한 장애 이력 데이터를 활용했다. 본 연구에서 고려되는 장애는 Network Node Down, Server Down, Windows Activation Services Down, Database Management System Service Down으로 크게 4가지이다. 각 장비별로 발생되는 장애들을 시간 순으로 정렬하고, 특정 장비에서 장애가 발생하였을 때, 발생 시점으로부터 5분 내 특정 장비에서 장애가 발생하였다면 이를 동시에 장애가 발생하였다고 정의하였다. 이렇게 동시에 장애가 발생한 장비들에 대해서 Sequence를 구성한 후, 구성한 Sequence 내에서 동시에 자주 발생하는 장비 5개를 선정하였고, 선정된 장비들이 동시에 장애가 발생된 경우를 시각화를 통해 확인하였다. 장애 분석을 위해 수집된 서버 리소스 정보는 시계열 단위이며 흐름성을 가진다는 점에서 이전 상태를 통해 다음 상태를 예측할 수 있는 딥러닝 알고리즘인 LSTM(Long Short-term Memory)을 사용했다. 또한 단일 서버와 달리 복합장애는 서버별로 장애 발생에 끼치는 수준이 다르다는 점을 감안하여 Hierarchical Attention Network 딥러닝 모델 구조를 활용했다. 본 알고리즘은 장애에 끼치는 영향이 클 수록 해당 서버에 가중치를 주어 예측 정확도를 높이는 방법이다. 연구는 장애유형을 정의하고 분석 대상을 선정하는 것으로 시작하여, 첫 번째 실험에서는 동일한 수집 데이터에 대해 단일 서버 상태와 복합 서버 상태로 가정하고 비교분석하였다. 두 번째 실험은 서버의 임계치를 각각 최적화 하여 복합 서버 상태일 때의 예측 정확도를 향상시켰다. 단일 서버와 다중 서버로 각각 가정한 첫 번째 실험에서 단일 서버로 가정한 경우 실제 장애가 발생했음에도 불구하고 5개 서버 중 3개의 서버에서는 장애가 발생하지 않은것으로 예측했다. 그러나 다중 서버로 가정했을때에는 5개 서버 모두 장애가 발생한 것으로 예측했다. 실험 결과 서버 간 영향이 있을 것이라고 추측한 가설이 입증된 것이다. 연구결과 단일 서버로 가정했을 때 보다 다중 서버로 가정했을 때 예측 성능이 우수함을 확인했다. 특히 서버별 영향이 다를것으로 가정하고 Hierarchical Attention Network 알고리즘을 적용한 것이 분석 효과를 향상시키는 역할을 했다. 또한 각 서버마다 다른 임계치를 적용함으로써 예측 정확도를 향상시킬 수 있었다. 본 연구는 원인 규명이 어려운 장애를 과거 데이터를 통해 예측 가능하게 함을 보였고, 데이터 센터의 서버 내에서 발생하는 장애를 예측할 수 있는 모델을 제시했다. 본 연구결과를 활용하여 장애 발생을 사전에 방지할 수 있을 것으로 기대된다.

• 한국산림과학회지
• /
• 제52권1호
• /
• pp.58-71
• /
• 1981

충남(忠南) 전북지방(全北地方) 적송림(赤松林)의 천이과정(遷移過程)을 연구(研究)하기 위하여 솔잎혹파리의 피해지속기간(被害持續期間)에 따라 피해극기지(被害極基地) (5년전(年前)에 피해발생(被害発生))인 공주(公州)(A), 피해지속지(被害持續地)(10년전(年前)에 피해발생(被害発生))인 부여(扶餘)(B), 피해회복지(被害回復地)(20년전(年前)에 피해발생(被害発生))로서 고창지역(高敞地域)(C)을 조사지역(調査地域)으로 설정(設定)하고, 각(各) 조사지역별(調査地域別)로 환경요인(環境要因)과 식생상태(植生狀態)를 調査하여, 환경요인(環境要因)과 식생상태(植生狀態), 삼림군집(森林群集)의 비교(比較), 식물상(植物相)의 변화(変化) 등(等)을 분석(分析)한 결과(結果)를 요약(要約)하면 다음과 같다 1. 임분(林分)이 솔잎혹파리피해(被害)로 부터 회복(回復)되어 감에 따라 식생구성(植生構成)에 변화(変化)가 오고 대상수종(代償樹種)으로 발달(発達)된 참나무류(類)의 상대우점치(相対優点値)가 감소(減小)되었다. 그러나 본(本) 조사지역내(調査地域內)에서는 상수리나무의 상대우점치(相対優点値)가 다른 참나무류(類) 보다 높았다. 2. 솔잎혹파리피해(被害)가 지속(持續)됨에 따라 삼림군집(森林群集)의 종구성상태(種構成狀態)가 점차 다양(多樣)하여진다. 그후 피해(被害)가 회복(回復)됨에 따라 임분(林分)의 종구성상태(種構成狀態)는 단순화(单純化)되는 것으로 나타났다. 3. 상대밀도(相対密度) 및 상대우점치(相対優点値)의 상대치(相対値)에 의(依)한 식생천이(植生遷移)를 종합분석(綜合分析)한 결과(結果) 솔잎혹파리피해(被害)의 극심(極甚)에서 우점종(優点種)을 이루던 참나무류(類)가 피해(被害)로부터 회복(回復)되어감에 따라 그 값이 감소(減少)되고, 싸리류(類), 진달래류(類) 등(等)이 하층식생(下層植生)을 형성(形成)하는 삼림군집(森林群集)으로 변화(変化)하여 갔다. 4. 식생(植生)에 미친 토심(土深), 토양함수량(土壤含水量), 유기물함량(有機物含量), 그리고 유기물층(有機物層)의 두께는 본(本) 조사대상지(調査対象地)의 범위내에 있어서는 거의 같은 것으로 사료(思料)되었고 연평균강수량(年平均降水量)과 온도(温度)도 유사(類似)하였다고 본다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• Applied Biological Chemistry
• /
• 제10권
• /
• pp.69-100
• /
• 1968

1 : 탁주양조(濁酒釀造)에 가장 큰 미생물원(微生物源)이 되는 누룩중(中)의 미생물군(微生物群)과 효소(酵素)를 조사하기 위(爲)하여 충남대학교(忠南大學校) 농과대학(農科大學)에서 제조(製造)한 누룩(S)와 시판(市販) 누룩(T)을 공시(供試)하여 사상균(絲狀菌), 호기성세균(好氣性細菌), 유산균(乳酸菌) 및 효모(酵母)를 검색(檢索) 계수(計數)하고 특(特)히 효모(酵母)는 TTC-agar 처리(處理)로서 그 정색별(呈色別)에 따라 유별(類別)하였으며 또한 Amylase 및 Protease 역가(力價)를 측정(測定)하여 얻은 결과(結果)는 다음과 같다. (a) S 누룩 1gm. 중(中)에는 Aspergilles eryzae group: $240{\times}10^5$, Black aspergilli: $163{\times}10^5$, Rhizopus: $20{\times}10^5$, Penicillia: $134{\times}10^5$, 호기성(好氣性) 세균(細菌): $9{\times}10^6{\sim}2{\times}10^7$, 유산균(乳酸菌): $3{\times}10^4$개(個)이였으며 T 누룩 1gm.중(中)에는 Aspergilles oryzae group: $836{\times}10^5$, Black aspergilli: $268{\times}10^5$, Rhizopus: $623{\times}10^5$, Penicillia: $264{\times}10^5$, 호기성(好氣性) 세균(細菌): $5{\times}10^6{\sim}9{\times}10^6$, 유산균(乳酸菌): $3{\times}10^4$개(個)이였다. (b) S 누룩중(中) 호기성세균(好氣性細菌)은 $80{\sim}90%$가 Bacillus subtilis 계(系)인것 같았으며 T 누룩의 것은 70%내외(內外)가 구균(球菌)이었고 유산균(乳酸菌)은 양(兩)누룩이 다 약(約) 80%가 구상유산균(球狀乳酸菌)이였다. (c) S 누룩 1gm.중(中)의 효모(酵母)는 약(約) $6{\times}10^4$개(個)로서 이 중(中) TTC Pink 효모(酵母)가 56.5%, Red pink 효모(酵母): 16%, Red 효모(酵母): 8%, White 효모(酵母): 19.5%이었으며 T 누룩 1gm.중(中)의 효모(酵母)는 약(約) 개(個)로서 이 중(中) Pink: 42%, Red Pink: 21%, Red: 28%, White: 9%이였다. (d) S 누룩 1gm.중(中)의 효소력(酵素力)은 액화형(液化型) amylase: $D^{40}^{\circ}_{30}^'=32\;W.V.$, 당화형(糖化型) amylase: 43.32 A.U., Acid protease 181 C.F.U., Alkaline pretease: 240 C.F.U.이였으며 T 누룩 1gm.의 효소력(酵素力)은 액화형(液化型) amylase: $D^{40}^{\circ}_{30}^'=32\;W.V.$, 당화형(糖化型) amylase: 34.92 A.U., Acid protease 138 C.F.U., Alkaline pretease: 31 C.F.U.이였다. 2 : S, T 누룩으로서 탁주(濁酒)를 담금하여 전양조(全釀造) 기간중(期間中) 매(每) 12시간(時間)의 미생물군(微生物群) 및 효소력(酵素力)의 소장(消長)을 측정(測定)하고 주효모(主酵母)라고 인정(認定)한 Pink와 Red 효모(酵母)를 분리배양(分離培養)하여 유산첨가(乳酸添加)로 pH를 4.2로 조절(調節)한 S, T 각구(各區)술덧에 $1{\times}10^6ml$개(個)를 첨가(添加) 양조(釀造)한 각(各)술덧중(中)의 미생물군(微生物群)의 소장(消長)을 측정(測定)하여 얻은 결과(結果)는 다음과 같으며 이 실험에서도 효모(酵母)는 TTC 정색별(呈色別)로 유별(類別) 계수(計數)하였다. (a) 각시료구(各試料區)에서 사상균(絲狀菌)은 담금후(後) $2{\sim}3$일경(日頃)부터 검출(檢出)되지 않았으며 호기성(好氣性) 세균(細菌)은 담금 직후(直後) 술덧 매(每) ml 당(當) S 누룩 사용(使用)의 3구(區)에서 $15{\times}10^7{\sim}35{\times}10^7$개(個), T 누룩 사용(使用)의 3 구(區)에서 $8.2{\times}10^7{\sim}12{\times}10^7$개(個)가 검출(檢出)되어 이중(中) 구균(球菌)은 유산(乳酸) 무첨가(無添加)로 담금한 S 및 T구(區)에서는 36시간경(時間頃)까지 많은 증식(增殖)을 하다가 기후(其後) 급속(急速)히 감소(減少)되고 유산(乳酸) 첨가(添加)로 담금한 SP, SR, TP, 및 TR 구(區)에서는 처음부터 거의 검출(檢出)되지 않고 Bacillus는 각구(各區)에서 다 같이 많은 기복(起伏)이 있는 소장(消長)을 하였으나 말기(末期)에는 초기(初期)의 약(約) $1/5{\sim}1/10$ 수(數)로 감소(減少)되었다. (b) 유산균(乳酸菌)은 담금후(後) 24시간경(時間頃)에 S 구(區)에서는 술덧 매(每) ml 당(當) 약(約) $7.4{\times}10^7$ 개(個)가 검출(檢出)되어 $3{\sim}4$일경(日頃)까지 약(約) $2{\times}10^8$ 개(個)로 증식(增殖)하고 그후(後) 급속(急速)히 감소(減少)되어 말경(末頃)에는 약(約) $4{\times}10^5$ 개(個)가 존재(存在)하였으며 T 구(區)에서는 24시간경(時間頃)에 검출(檢出)되었으며 3일경(日頃)에는 약(約) $3{\times}10^7$ 개(個), 말경(末頃)에는 약(約) $2{\times}10^5$ 개(個)가 존재(存在)하였다. 한편 SP, SR, TP, 및 TR 구(區)에서는 각구(各區)마다 24시간경(時間頃)에 약(約) $4{\times}10^5$ 개(個)로 현저(顯著)히 적은 수(數)가 검출(檢出)되었으며 기후(其後) 별(別) 변동(變動)없는 소장(消長)을 하거나 사멸(死滅)되어 거의 검출(檢出)되지 않았다. (c) 각구(各區)술덧에서 검출(檢出)된 유산균(乳酸菌)은 대부분(大部分) 구상균(球狀菌)이였으며 또한 유산균(乳酸菌)의 소장(消長)은 술덧중(中)에 생성(生成)되는 유산(乳酸) 및 Alcohol 함량(含量)과 부합(符合)되는 경향(傾向)이였다. (d) 효모(酵母)는 24시간경(時間頃)부터 증식(增殖)이 뚜렷하여 술덧 매(每) ml당(當) S 구(區)에서는 약(約) $2{\times}10^8$ 개(個)가 되고 48시간경(時間頃)에는 약(約) $4{\times}10^8$ 개(個)가 되어 계속(繼續)하다가 후기(後期)에 다시 증가(增加)되어 $5{\sim}7{\times}10^8$ 개(個)가 되었으며 T 구(區)에서는 24시간경(時間頃)에 $4{\times}10^8$ 개(個)가 되었고 기후(其後) 기복(起伏)을 보이면서 $2{\sim}5{\times}10^8$ 개(個)로 계속(繼續)하였다. (e) S, T 양구(兩區)술덧중(中)에서 소장(消長)한 효모(酵母)는 TTC Pink 효모(酵母)가 90%이상(以上)을 차지하고 Red pink 및 Red 효모(酵母)는 전양조기간(全釀造期間)을 통(通)하여 $2{\times}10^6{\sim}3{\times}10^7$ 개(個) 사이에서 소장(消長)하였다. (f) SP 에서는 효모(酵母)는 24시간경(時間頃)에 S 구(區)보다 2배(倍)가 되는 약(約) $5{\times}10^8$ 개(個)의 Pink 효모(酵母)가 검출(檢出)되었으며 중기말경(中期末頃)까지는 S 구(區)보다 많은 수(數)이였으나 후기(後期)에는 별차(別差)없는 수(數)가 되었다. (g) SR 구(區)에서 소장(消長)하는 총효모수(總酵母數)는 SP 구(區)와 대차(大差)는 없었으나, 첨가(添加)해준 Red 효모(酵母)는 초기(初期)에 다소(多少) 많이 검출(檢出)되고 3일후(日後)부터는 S 구(區)와 별차(別差)없는 수(數)로 소장(消長)하였으며 TR구(區)에서도 Red 효모(酵母)가 초기(初期)에는 T 구(區)에 비(比)해서 많았으나 중기이후(中期以後)부터는 T 구(區)와 별차(別差)없는 경향(傾向)이어서 Red 효모(酵母)를 가(加)한 구(區)에서도 Pink 효모(酵母)가 훨씬 우세(優勢)함을 보여 본실험(本實驗)에서 검출(檢出)된 Red 효모(酵母)는 탁주양조(濁酒釀造)에서 후기(後期)까지 계속(繼續) 생육(生育)은 하나 많은 증식(增殖)은 하지 않았다. (h) TP 구(區)에서 Pink 효모(酵母)는 2일경(日頃)에 약(約) $5{\times}10^8$ 개(個)가 되어 T 구(區)에 비(比)해서 많고 기후(其後) 감소(減少)되는 경향(傾向)이나 T 구(區)보다는 많으며 후기(後期)에서는 역시(亦是) T 구(區)와 별차(別差)없는 수(數)가 되었다. (i) 술덧중(中)의 효모(酵母) 소장(消長)과 동시(同時)에 Alcohol 생성량(生成量)을 측정(測定)한 결과(結果) Pink 효모(酵母)를 첨가(添加)한 구(區)에서 초기(初期)에 다소(多少) 많은 생성량(生成量)을 보였으나 중기(中期) 이후(以後)는 효모(酵母) 무첨가구(無添加區)와의 차이(差異)를 인정(認定)할 수 없었고 또 Alcohol생성(生成)은 효모(酵母) 총수(總數)와 비례(比例)하지 않았다. (j) 액화형(液化型) Amylase는 담금 후(後) 12시간경(時間頃)까지 가장 강(强)하고 24시간경(時間頃)에 일단(一旦) 감소(減少)되었다가 시간경(時間頃)에 최고(最高)로 증가(增加)된 후(後) 74시간경(時間頃)까지 서서(徐徐)히 감소(減少)되고 기후(其後)는 급(急)히 감소(減少)를 보였다. (k) 술덧발효중(醱酵中) Alkaline protease는 불규칙적(不規則的)이기는 하나 계속(繼續) 감소(減少)되는 소장(消長)이었고 Acid protease는 24시간경(時間頃)에 최고(最高)로 증가(增加)하였다가 급(急)히 감소(減少)된 후(後) 다시 증가(增加)하는 불규칙적(不規則的)인 소장(消長)을 보였으나 Alkaline protease 보다는 계속(繼續) 강(强)하였었다. 3 : 본실험(本實驗)에서 가장 많이 검출(檢出)된 TTC Pink 효모(酵母)와 계속(繼續) 나타난 2주(株)의 Red Pink 효모(酵母) 및 1주(株)의 를 동정(同定)하고 이들의 생리적성질(生理的性質)을 검사(檢査)한 결과(結果)는 다음과 같다. (a) TTC Pink 효모(酵母)(B-50P)와 2주(株)의 Red Pink 효모(酵母)(B-54RP 및 B-60RP)는 Saccharomyces cerevisiae 형(型)이였고 Red 효모(酵母)(B-53P)는 Hansenula subpelliculosa 형(型)이였다. (b) 분리동정(分離同定)한 발효력(醱酵力)을 측정(測定)한 결과(結果) 2주(株)의 TTC Red Pink 효모(酵母)가 가장 강(强)하고 Pink 효모(酵母)가 다소(多少) 떨어지며 Red효모(酵母)는 현저(顯著)히 약(弱)함을 보였고 특(特)히 Pink 및 2주(株)의 Red Pink 효모(酵母)는 초발효력(初醱酵力)이 강(强)하여 탁주양조(濁酒釀造)에 적합(適合)함을 알았으며 Red효모(酵母)는 발효력(醱酵力)은 약(弱)하나 Ester생성력(生成力)이 강(强)하여 탁주양조(濁酒釀造)에 중요(重要)한 역할(役割)를 하는것을 알았다. 따라 탁주양조(濁酒釀造)에는 TTC Red Pink 및 Pink로 정색(呈色)되는 Saccharomyces cerevisiae 형(型)이 우량(優良)함을 추정(推定) 할 수 있었다. (c) 분리동정(分離同定)한 4주(株)효모(酵母) 아초산내성(亞硝酸耐性)은 강(强)하였으며 유산내성(乳酸耐性)은 국즙(麴汁) 배지(培地)에서 3%정도(程度)이었으나 Red효모(酵母)는 더 강(强)하였고 Alcohol 내성(耐性)은 Hayduck배지(培地)에서 Pink 및 Red Pink 효모(酵母)는 3%정도(程度)이고 맥아즙(麥芽汁) 배지(培地)에서는 13%정도(程度)이었으나 Red 효모(酵母)는 이들보다 훨씬 약(弱)하였으며 Gelatin 액화(液化)는 2주(株)가 다 40일(日)까지 (-)이였다. 4 : 탁주양조중(濁酒釀造中)의 발효도(醱酵度)는 2일경(日頃)에 총발효율(總醱酵率)의 $70{\sim}80%$가 이루어지고 $3{\sim}4$일경(日頃)까지 90%내외(內外)가 진행(進行)되어 주발효(主醱酵)는 이 시기(時期)에 종료(終了)됨을 보였으며 또한 탁주양조(濁酒釀造)에 있어서 담금한 총전분량(總澱粉量)에 대(對)한 주정(酒精) 발효율(醱酵率)은 65%내외(內外)가 됨을 알 수 있었다. 5 : 제등(齊藤)가 탁주(濁酒)술덧에서 분리(分離)한 Saccharomyces coreanus가 본실험(本實驗)에서 전연(全然) 검출(檢出)되지 않은 이유(理由)는 1930년경(年頃)부터 누룩제조(製造)에 국균(麴菌)을 종균(種菌)으로 접종(接種)하였으며 또한 탁주양조(濁酒釀造)에 일본국(日本麴)도 혼합사용(混合使用)하여서 탁주양조(濁酒釀造)에 있어서 미생물상(微生物相)이 완전(完全)히 달라진 탓이 아닌가 생각되며 이것을 뒷받침 하는 것으로 과거의 약탁주(藥濁酒) 고유미(固有味)가 달라진 것을 들 수 있다.