• Asian-Australasian Journal of Animal Sciences
• /
• 제12권8호
• /
• pp.1285-1291
• /
• 1999

A feeding trial was carried out over 238 days to determine the effect of compensatory growth in crossbred calves having 166 kg body weight. Fifteen crossbred calves were divided into two groups of five calves (G1 group) and ten calves (G2 group) as per randomized block design. Growth study was conducted on the feeding of wheat straw based diet containing 60 and 30 percent concentrate supplying equal amount of protein in group G1 and G2 respectively for 119 days (phase - I). At the end of phase-I, calves of G2 group were subdivided in to two groups (G3 and G4). One sub group (G4) received 60% concentrate in their diet (during 120 to 238 days of experiment) while other subgroup G3 received 30% concentrate in their diet (phase-II). The calves of G1 group continued to receive the same diet as during phase-I experiment. Mean DM intake was significantly higher in calves fed high level of concentrate (in G1 and G4 groups), which resulted in significantly higher digestibility of all nutrients except NDF. Nitrogen balance was positive in all the groups and showed significant differences in phase-II (higher nitrogen retention in G4 group than G1 group). ME intake was significantly affected by the level of dietary concentrate, being higher in high concentrate fed group (G1 and G4 than G2 and G3 group). Higher daily body weight gain in the calves of G4 group during phase-II than in G1 and G3 groups was due to compensatory growth on shifting animals from low concentrate to high concentrate based ration. Average daily body weight gain was higher in phase-I than in the phase-II. Protein and energy intake per unit body weight gain were significantly lower in calves fed high concentrate diet.

• 한국해양공학회지
• /
• 제2권2호
• /
• pp.78-86
• /
• 1988

In order to investigate the corrosion pit occurrence and growth characteristic of M.E.F.(martensite encapsulated islands of ferrite) dual phase steel was made with a suitable heat treatment of raw material(SS41), a corrosion fatigue test was performed under rotary bending in the salt solution having a concentration from 0.01 wt percent to 3.5 wt percent. The fatigue strength of dual phase steel was remarkably decreased with an increase in concentration of salt solution; approximately from 63% to 80% in case of dual phase steel and from 40% to 71% in case of raw material. Corrosion pit occurred in the martensite phase and fatigue cracks from corrosion pits were selectively propagated in martensite phases. In the observation of corrosion pits at the origin of fatigue cracks, it had been found that corrosion pits were grown into hemispherical pits and a/c(the surface diameter, 2c and the depth, a of corrosion pit)was about 1.0-1.5regardless of the variation of salt solution concentration. The difference of corrosion pit depth growth rate was increased with an increase in concentration of salt solution according to an increase in stress level.

• Journal of Preventive Medicine and Public Health
• /
• 제26권3호
• /
• pp.347-358
• /
• 1993

The purpose of this study is to analyze the relationship between the blood pressure level and their sexual maturity and physical growth in the children at puberty. For this purpose, we estimated the blood pressure, physical growth and sexual maturity of the boys of 335 and girls of 373 who are in the middle schools which are located in Kangwha County, Kyungki-Do. Both systolic and diastolic pressure were measured twice. Such physical growth as height, body weight, skin fold thickness, waist circumference, hip circumference and arm circumference were measured. The sexual maturity was estimated according to the classification of Tanner's 5-phase-sexual-maturity : in boys, their pubic hair development phase : in girls, their pubic hair and breast development phase and the menstrual experience. In the phase of the pubic hair development, the boy's sexual maturity was distributed into this; the 1 st 56.4%, the 2nd 29.3%, the 3rd 9.9%, the 4th 4.1% and the 5th 0.3%. While the girls sexual maturity was distributed into this the 1st 20.5%, the 2nd 34.9%, the 3rd 30.6% the 4th 12.6% and the 5th 1.3% in the phase of the pubic hair development, and the 1st 0.8%, the 2nd 13.7%, the 3rd 36.2%, the 4th 18.8% and the 5th 30.5% in the phase of the breast development. This indicated that the girls sexual maturity was higher than those of the boys. The girls menstrual experience rate accounted to the 58.2%. In order to see the relationship between the children's sexual maturity and blood pressure level, we regress blood pressure level on physical growth (i.e., height, BMI) and sexual maturity. Sexual maturity in treates as dummy variables. As the resulf of this analysis, the boys' sexual maturity has nothing to do with the blood pressure either systolic or diastolic. But the girl's systolic pressure was statistically significant ; the 9% of the physical growth, the 5% of the pubic hair development and the 4% of the breast development in sexual maturity was explained. In the girls' diastolic pressure, only their pubic hair development was statistically significant ; the 7% of the physical growth and the 7% of the pubic hair development in the diastolic was explained and the 5% of the physical growth in the diastolic Korotokoff phase IV and the 2% of the pubic hair development in the diastic Korotokoff phase was explained, especially, the girls exprienced menstruation, their systolic and diastolic pressure were significantly high (P<0.01). Conclusively, in the first grade children attending middle schools who are in the early process of the sexual development, the sexual maturity was not related to blood pressure level, on the other hand, the blood pressure level of the girls who are more sexual development than those of the boys' have something to do with sexual maturity and physical growth.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.9-12
• /
• 2001

The microstructure evolution and the peritectic solidification of Sm$Ba_{2}$$Cu_{3}$ $O_{7-\delta}$ superconducting materials during the isothermal annealing were studied over the temperature range 1030-$1060^{\circ}C$ The faceted growth of the peritectic phase and its dependence upon Sm-diffusion in the liquid phase are discussed. A growth model is proposed to explain the growth shape of Sm123 crystals.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.981-994
• /
• 2017

Purpose: In this study, the reliability growth management procedures for armed vehicle is suggested and an illustrative case study of launcher system is given. Methods: Crow-AMSAA model is adopted to manage reliability growth of armed vehicle using failure data acquired from development test phase to field operation phase. Between the development test phase and the production phase, the suggested reliability growth procedures for armed vehicle entails accelerated life test of the selected module whose design is changed to improve its reliability for assuring the target system reliability. And it can be verified through estimating the system reliability based on the failure data of field operation phase. Results: It is shown that the proposed reliability growth management procedures are effective for armed vehicle based on the case study of launcher system. After estimating the reliability of launcher system at every development test, some items are selected to change their designs for improving reliability. Accelerated life test is performed to prove the reliability improvement and finally it is verified through the field operation. Conclusion: The reliability growth management procedures for armed vehicle is suggested and the case study of launcher system shows it can be effective for managing the reliability growth of the armed vehicle.

• Journal of Microbiology and Biotechnology
• /
• 제14권6호
• /
• pp.1129-1133
• /
• 2004

The effects of Pluronic F-68, a non-ionic surfactant, on the growth and physical characteristics of Digitalis lanata suspension cultures were investigated in aqueous two-phase systems (ATPSs) composed of $4.5\%$ polyethylene glycol (PEG) 20,000 and $2.8\%$ crude dextran. In the range of 0.1-10.0 g $1^{-1}$, Pluronic F-68 enhanced the maximum cell density in a medium with ATPSs, even though Pluronic F-68 did not affect cell growth in a normal growth medium. In terms of physical properties of ATPSs with cell suspension cultures, 0.2 g $1^{-1}$ of Pluronic F-68 reduced viscosity by up to $40\%$, while 0.1 g $1^{-1}$ of Pluronic F-68 significantly enhanced the oxygen transfer rate. In addition, we successfully performed aqueous two-phase cultivation in a 5-1 stirred tank bioreactor with 0.5 g $1^{-1}$ of Pluronic F-68, and discovered that cell growth in ATPSs was similar to that in normal growth medium.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 제11차 KACG 학술발표회 Crystalline Particle Symposium (CPS)
• /
• pp.109-128
• /
• 1996

• 한국세라믹학회지
• /
• 제35권4호
• /
• pp.413-419
• /
• 1998

${\beta}$-silicon carbides with yttrium aluminum garnet of 2,5,10 mol% were prepared by a liquid--phase sint-ering and the microstructural evolution and phase transformation were investigated during sintering as functions of liquid-phase amount and sintering time. The rate of grain growth decreases with the addition of the amount of yttrium aluminum garnet (YAG) in the SiC starting powder however the apparent density and the aspect ratio of grains in sintered body increase. The phase transformation from ${\beta}$-SiC to ${\alpha}$-SiC were dependent on the liquid-phase amount and sintering time.

• 한국식품위생안전성학회지
• /
• 제12권3호
• /
• pp.181-187
• /
• 1997

Lactobacillus acidophilus NCFM, Lactobacillus casei YIT 9018, Bifidobacterium longum 8001, and Bifidobacterium longum 8025 at the level of 106 cfu/$m\ell$ were cultured with 104 cfu/$m\ell$ of Escherichia coli O157:H7 KSC 109 or Salmonella typhimurium ATCC14028, in order to verify the effects of lactic acid bacteria and bifidobacteria on the growth of the pathogens. In the mixed culture of lactic acid bacteria with E. coli O157:H7 KSC 109, Growth inhibition and atypical microcolonies of E. coli O157:H7 KSC 109 were observed. The pathogens inoculated grew for 5 hors (pH 5.3), by the time L. acidophilus NCFM reached the exponential growth phase, and then the surviving pathogens were decreased to 101 cfu/$m\ell$ after 35 hours. When L. caseiYIT 9018 was grown with the pathogens, they grew for 10 hours (pH 4.6), by the time L. casei YIT 9018 reached the end of exponential growth phase, and then the surviving pathogens were decreased drastically. Up to the stationary growth phase of lactic acid bacteria, L. acidophilus NCFM exhibited stronger inhibition against the pathogens than L. casei YIT 9018 did, which might be attributed to its faster growth. Likewise bifidobacteria inhibited the growth of the pathogens tested, bifidobaceria was weaker in the inhibitory activity than lactic acid bacteria. When Bifidobacterium longum 8001 was cultured with the pathogens, E. coli O157:H7 KSC 109 was gradually ingibited at the stationary growth phase of bifidobacteria, atypical microcolonies were formed on Levine EMB medium after 48 hours, and Salmonella grew up to 106 dfu/$m\ell$, then was drastically ingibited at the exponential growth phage of Bifidobacterium longum 8001. But when Bifidobacteriuam longum 8025 was cultured with the pathogens, the pathogens grew to the same level of Bifidobacteriuam longum 8025 was cultured with the pathogens, the pathogens grew to the same lever of Bifidobacteriuam longum 8025 after 10 hours, then the surviving pathogens were decreased drastically.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.66-67
• /
• 2006

The master sintering curve (MSC) is derived from densification data over a range of heating rates and temperatures. To improve the accuracy, several modifications were proposed: multi-phase MSC for solid state sintering with phase changes, MSC for liquid phase sintering, and MSC with consideration of grain growth. The developed MSC models were applied to several material systems such as molybdenum, stainless steels, and tungsten heavy alloys (WHA), in order to evaluate the effect of compaction pressure, phase change, grain growth, and composition on densification, to classify regions having different sintering mechanism, and to help engineer design, optimize, and monitor sintering cycles.