• 한국전기전자재료학회논문지
• /
• 제11권2호
• /
• pp.90-94
• /
• 1998

This study aims at analyzing to treeing in the solid-solid interface which is insulation type of cable junction parts, the proceeding of tree-growth and electrical breakdown were research in the study. Interface was made artificially to detect how it influenced the insulating ability of the whole system, the specimen were XLPE generally used in cable. The interface conditions were divided into two parts. First condition being the one focused on the surface of interface, it was treated with sand paper (#80, #600, #1200). For the second condition, the pressure of interface was varied as the value of 1, 5, 10 [$kg/cm^2$]. Using above conditions, treeing and breakdown properties on tree-growth were respectively compared in details. As a result, breakdown time was shorter for the full range of supplied voltage in the case of interface existed in the joint than non-existed interface. In the case of existed interface, the interface which had high-interface pressure and painted with silicon insulating oil was the best in the aspect of breakdown characteristics.

• 식물병연구
• /
• 제27권3호
• /
• pp.99-106
• /
• 2021

The fungal isolate Isaria javanica pf185 has potential as a mycopesticide because it demonstrates insecticidal activity against the green peach aphid and antifungal activity against Colletotrichum gloeosporioides. For commercialization of this isolate, determination of the optimal and least expensive culture conditions is required; however, these data are not currently available. This study describes the conditions for optimal development of conidia and production of metabolites for the biocontrol of the fungal pathogen. The optimal culture conditions were examined using cultures on solid agar and liquid media. High growth temperature enhanced spore formation but reduced antifungal activity in both solid and liquid media. The highest spore yield was obtained in a medium containing glucose as a carbon source and yeast extract as a nitrogen source. Soybean powder and wheat bran were effective nitrogen sources that promoted spore production and antifungal activity of the isolate. These results revealed the basic, cost-effective growth media for commercial production of a biopesticide with insecticidal and antifungal properties for use in integrated pest management.

• 한국주조공학회지
• /
• 제25권1호
• /
• pp.30-35
• /
• 2005

The structures and mechanical property of the unidirectionally solidified Al-Co eutectic alloy were investigated. Al-Co eutectic alloy was unidirectionally solidified with growth rates(R) between I cm/hr and 10 cm/hr in the induction furnace maintaining the thermal gradient (G) at solid-liquid interface, $32^{\circ}C$/cm. The eutectic microstructure was varied with the growth condition(G/R ratio). When the G/R ratio was larger than $8.5{\times}10^{3}^{\circ}C/cm^{2}/sec$, a lamellar structure was formed, But the G/R ratio was smaller than $8.5{\times}10^{3}^{\circ}C/cm^{2}/sec$, a colony structure was formed. It was found that the interlamellar spacing(${\lambda}$) was dependent on the growth rate(R) with the relationship, ${\lambda}^{2}{\cdot}R=constant$. The microhardness of this eutectic alloy increased with increase in the growth rate.

• KSBB Journal
• /
• 제20권1호
• /
• pp.60-65
• /
• 2005

본 연구의 목적은 최근 DHA와 더불어 분유첨가제 등 기능성 신소재로서 수요가 증가되고 있는 arachidonic acid (AA)를 곰팡이 Mortierella alpina ATCC 32222를 이용하여 실질적으로 값싸게 생산할 수 있는 고체발효공정을 개발하기 위한 것이다. 본 연구에서는 회분식 심부 및 고체발효연구를 통하여 균체성장과 AA 생성에 대한 패턴을 조사하였는데, 심부발효에서는 포도당과 효모추출물을 그리고 고체발효에서는 농산 부산물인 저렴한 쌀겨를 원료로 하여 실험하였다. 심부발효 및 고체발효의 속도론적 관점에서 두 공정 모두 균체성장과 AA 생성간에 전형적인 mixed-growth associated pattern이 얻어졌다. 고체발효 배지의 최적화를 위하여 carbon to nitrogen (C/N) ratio를 6.5-20 범위로 조절하여 실험해 본 결과 쌀겨에 탄소원인 포도당을 첨가해 주지 않은 경우 즉, 6.5에서 가장 좋은 결과가 얻어졌다. 또한 sodium glutamate를 쌀겨에 소량 $(0-4\%,\;w/w)$ 첨가했을 때 보고된 문헌과는 달리 균체성장은 오히려 감소되는 경향을 보였으며, 고온에서 볶은 참깨로부터 얻어진 sesame oil $(7.5\%,\;w/w)$을 첨가했을 경우 AA 생산성은 약 1.2배가 향상되었다.

• 한국재료학회지
• /
• 제9권11호
• /
• pp.1112-1116
• /
• 1999

$\textrm{Bi}_{2}\textrm{Te}_{3}$의 고/액 계면을 통하여 전류밀도와 방향을 달리 하면서 통전시켰을 때 발생하는 고상, 액상 및 고/액 계면에서의 미소 온도변화를 측정하였다. 이 냉각(가열) 효과는 전류밀도, 통전방향 및 시간에 따라 다르게 나타났으며, 온도변화에 미치는 Peltier 열, Thomson 열 및 Joule 열의 영향을 이론 및 실험에 의해 각각 분류하였다. $\textrm{Bi}_{2}\textrm{Te}_{3}$의 고/액상간의 Peltier 계수는 -1.10$\times\textrm{10}^{-1}$V이었으며, 고상과 액상의 Thomson 계수는 각각 7.31\times\textrm{10}^{-4}V/K와 5.77\times\textrm{10}^{-5}V/K이었다. 직류를 통전하면서 Bi$_2$Te$_3$결정을 성장한 결과, 고상에서 액상으로 통전한 경우, Peltier 냉각에 의한 온도구배의 상승으로 방향성이 향상된 결정을 얻을 수 있었지만, 전류의 방향을 반대로 하면, 결정성 향상에 별 도움을 주지 못하였다.

• Advances in environmental research
• /
• 제9권2호
• /
• pp.97-107
• /
• 2020

The indiscriminate growth in global population poses a threat to the world in handling and disposal of Municipal solid waste. Rapid urban growth increases the production, consumption and generation of Municipal solid waste which leads to a drastic change in the environment. The methane produced from the Municipal Solid waste accounts for up to 11% global anthropogenic emissions, which is a major cause for global warming. This study reports the methane emission estimation using IPCC default, TNO, LandGEM, EPER and close flux chamber from open dump yards at Perungudi and Kodungaiyur in Chennai, India. The result reveals that the methane emission using close flux chamber was in the range of 8.8 Gg/yr-11.3 Gg/yr and 6.1Gg/yr to 9.1 Gg/yr at Kodungaiyur and Perungudi dump yard respectively. The per capita waste generation was estimated based on waste generation and population. The waste generation potential was projected using linear regression model for the period 2017-2050. The trend of CH₄ emission in the actual field measurement were increased every year, similarly the emission trend also increased in IPCC default method (mass balance approach), EPER Germany (zero order decay model) where as TNO and Land GEM (first order decay model) were decreased. The present study reveals that Kodungaiyur dump yard is more vulnerable to methane emission compared to Perungudi dump yard and has more potential in waste to energy conversion mechanisms than compare to Perungudi dump yard.

• 한국결정성장학회지
• /
• 제9권6호
• /
• pp.601-605
• /
• 1999

$LiCoO_2$와 고용체 화합물인 $LiCo_{1-x}Ni_XO_2$을 고상반응법을 이용하여 제조하여 XRD, SEM, 입도분석, $^7$Li NMR을 통하여 그 구조적 cation mixing 현상을 조사하였다. 고상반응법으로 합성한 $LiCoO_2$와 $LiCo_{1-x}$$Ni_x$$O_2$의 미세결정상은 hexagonal layered structure를 보여주었고 전반적인 입도는 니켈의 함량에 따라 증가되었다. 고용체에 있어서 Ni의 함량 분율(x)이 x=0.3, 0.5, 0.7로 Ni의 양이 증가함에 따라 cation mixing 효과가 증가되었다. $^7$Li NMR의 peak frequency는 Ni의 함량이 증가함에 따라 high frequency로 shift되었고 line width는 Ni의 함량에 따라 넓어지는 양상을 보여주었다.

• 한국분말재료학회지
• /
• 제25권2호
• /
• pp.104-108
• /
• 2018

Grain-growth behavior in the $95Na_{1/2}Bi_{1/2}TiO_3-5BaTiO_3$ (mole fraction, NBT-5BT) system has been investigated with the addition of $Na_2CO_3$. When $Na_2CO_3$ is added to NBT-5BT, the growth rate is higher than desired and grains are already impinging each other during the initial stage of sintering. The grain size decreases as the sintering temperature increases. With the addition of $Na_2CO_3$, a liquid phase infiltrates the interfaces between grains during sintering. The interface structure can be changed to be more faceted and the interface migration rate can increase due to fast material transport through the liquid phase. As the sintering temperature increases, the impingement of abnormal grains increases because the number of abnormal grains increases. Therefore, the average grain size of abnormal grains can be decreased as the temperature increases. The phenomenon can provide evidence that grain coarsening in NBT-5BT with addition of $Na_2CO_3$ is governed by the growth of facet planes, which would occur via mixed control.

• 한국주조공학회지
• /
• 제17권5호
• /
• pp.502-509
• /
• 1997

The mechanical behavior and microstructural evolution in the ignition-proof Mg-Zn-Ca-Zr alloy produced by the semisolid squeeze casting are clarified and the mechanical properties are also compared with those of squeeze cast Mg-Zn-Ca-Zr alloy. The tensile strength and elongation increase slightly as the solid fraction depending on temperature decreases, while the 0.2% proof stress decreases. The size of primary crystal increases with increasing holding time. The tensile strength and 0.2% proof stress of the semi-solid squeeze cast Mg-Zn-Ca-Zr alloy decrease as the size of primary crystal increases, indicating the dependence of strength on the size of primary crystal. The elongation of the semi-solid squeeze cast Mg-Zn-Ca-Zr alloy is two times as large as the squeeze cast Mg-Zn-Ca-Zr alloy and the tensile strength is unchanged despite the growth of primary crystal, resulting from the refining of the melted ${\alpha}Mg$ phase and the brittle eutectic compound as well as the reduction of solidification shrinkage and porosities.

• 설비공학논문집
• /
• 제8권3호
• /
• pp.413-422
• /
• 1996

Freezing of water in von-$K{\acute{a}}rm{\acute{a}}n$ swirling flow is considered. The transient behavior of the temperature distribution in both solid and liquid phases and freezing rate are determined. The fluid flow induced by the rotation of solid strongly inhibits the freezing process. The thickness of frozen layer is inversely proportional to the square root of the angular velocity of solid. As the angular velocity or initial liquid temperature becomes larger, the freezing process is more strongly inhibited by the fluid flow. When phase change is present, the transient heat transfer rate is greater than the case with no phase change.