• Journal of Korean Neurosurgical Society
• /
• 제62권5호
• /
• pp.577-585
• /
• 2019

Objective : Comparing the effects of magnetically controlled growing rod (MCGR) and traditional growing rod (TGR) techniques on the sagittal plane in the treatment of early-onset scoliosis (EOS). Methods : Twelve patients were operated using dual MCGR technique in one center, while 15 patients were operated using dual TGR technique for EOS in another center. Patients' demographic characteristics, complications and radiological measurements such as cobb angle, thoracic kyphosis, lumbar lordosis, T1-S1 range (mm), proximal junctional angle, distal junctional angle, sagittal balance, coronal balance, pelvic incidence, sacral slope and pelvic tilt were assessed and compared in preoperative, postoperative and last follow-up period. Results : Age and sex distributions were similar in both groups. The mean number of lengthening in the MCGR group was 12 (8-15) and 4.8 (3-7) in the TGR group. Two techniques were shown to be effective in controlling the curvature and in the increase of T1-S1 distance. In TGR group, four patients had rod fractures, six patients had screw pull-out and four patients had an infection, whereas three patients had screw pull-out and one patient had infection complications in the MCGR group. Conclusion : There was no significant difference between the two groups in terms of cobb angle, coronal and sagittal balance and sagittal pelvic parameters. MCGR can cause hypokyphosis and proximal junctional kyphosis in a minimum 2-year follow-up period. The implant-related complications were less in the MCGR group. However, larger case groups and longer follow-up periods are required for the better understanding of the superiority of one method on other in terms of complications.

• Journal of Korean Neurosurgical Society
• /
• 제63권2호
• /
• pp.228-236
• /
• 2020

Objective : It can be assumed that the progression of scoliosis in the juvenile period will increase the asymmetry in the rib cage, and thus will contribute to an increase in the breast asymmetry (BA) in the future. We are looking for answers to the questions; "How will the breasts look with respect to each other and what is the possibility of developing BA in the early follow-up period following the early surgical treatment and final fusion surgery of juvenile idiopathic scoliosis (JIS)?" For this reason, in this study, we aimed to evaluate the breast asymmetries of patients in the period after the final fusion. Methods : Following growing rod treatment, final fusion was achieved in 12 females with JIS. We used the anthropomorphic measurement of the modified BREAST-V formula to assess whether there was an asymmetry between the breasts after an average of 4.8 years (2-11) following final fusion. Results : In comparison, the mean volume of the left breast (222.4 mL [range, 104.1-330.2]) was larger than the mean volume of the right breast volume (214.5 mL [range, 95.2-326.7]) (p=0.034). The left breast was larger in 75% of the patients. BA was observed in 50% of the patients. No correlation was detected between the Cobb angle of the patient after final fusion and BA (p=0.688). Conclusion : In the late follow-up period, BA was detected in 50% of the patients with JIS who achieved final fusion after treatment with growing rod. In majority of the patients, left breast was larger. The patients with JIS and their families can be informed prior to the operation about the probability of BA seen in the follow-up period after fusion.

• 한국결정성장학회지
• /
• 제5권3호
• /
• pp.250-260
• /
• 1995

일반적으로 floating zone법에 의한 결정성장시에는 소결봉이 원료로서 사용되며 이러한 원료봉의 소결조건에 의해 결정성장시 안정성이 영향을 받게 된다. 그 원인은 FZ법에 의한 결정성장시 소결조건에 따른 원료봉의 미세구조의 변화가 소결봉과 융액사이의 계면형태를 변화시키기 때문이다. 본 연구에서 FZ법에 의해 $TiO_2$(rutile)과 ruby 단결정을 성장하였으며 이를 통해 소결봉의 미세구조가 FZ법에 의한 결정성장시에 용융대의 안정서에 미치는 영향을 분석하였다.$TiO_2$(rutile)과 ruby의 결정성장에 사용되는 원료봉의 소결시 소결온도가 높아지고 소결시간이 길어질수록 원료봉 중앙부와 바깥ㅂ분의 입자크기의 차이가 커져서 결국에는 그로 인하여 원료봉의 용융양상이 바뀌어졌다. FZ법에 의한 결정성장시 원료봉의 최적소결 조건은 입자의 크기가 소결봉 전영역에 걸쳐 균일하게 분포되는 것이었다. 반면 일반 적으로 중요하다고 여기는 소결봉의 porosity는 FZ법에 의한 결정성장시 영향력 있는 인자가 아니라는 점을 소결하지 않은 원료봉을 사용해 결정성장 실험을 행하여 봄으로써 확인할 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.137-138
• /
• 2009

There is a growing interest to replace the commercial steels with non-heat treated steels, which does not involve the spheroidization and quenching-tempering treatment in the steel-wire industry production. However, non-heat treated steels should satisfy high strength and good formability without performing heat treatment. Therefore, it is important to investigate optimum materials showing a good combination of strength and formability after the cold drawing process. In this presentation, non-heat treated steel wire rod produced by POSCO will be introduced and discussed on detail technical concepts.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.47-50
• /
• 2002

Raft is a distinctive membrane domain enriched in a certain class of lipids, cholesterol, and proteins observed on the plasma membrane. Growing evidence has revealed that such membrane domains play key roles in signal transduction, fertilization, development, transmitter release, and so on. Recently, we have isolated raft-like detergent-resistant membrane (DRM) fraction from bovine photoreceptor rod outer segments. Transducin and its effecter, cGMP-phosphodiesterase, elicited stimulus-dependent translocation between detergent-soluble membrane and DRM. This suggested potential importance of such distinct membrane domains in vertebrate phototransduction. Here, we will discuss physiological meaning of the translocation of major components of cGMP cascade to raft-like membrane in phototransduction. We would like to propose a hypothesis that raft-like membrane domains on the disk membrane are the place where cGMP cascade system could be quenched.

• Applied Science and Convergence Technology
• /
• 제27권2호
• /
• pp.38-41
• /
• 2018

We demonstrate the growth of a sheet-like ZnO membrane on ZnO nano rod layers. The growth process is composed of 3 steps of ZnO seed formation, ZnO nano rod growth and sheet-like ZnO membrane formation on those nano rods. To confirm the fundamental growth mechanism, the lattice structures of each step were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM) measurement. Analysis of the relation between the texture coefficient and the surface shape of the ZnO membrane on the ZnO nano rods shows that the surface morphology of ZnO nano structures can be controlled using the temperature of the growing solution and the concentration of the chemical solution.

• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.1050-1054
• /
• 1990

Rutile(TiO2) single crystals were grown by FZ method. Feed rod was sintered in the longitudinal tube-shaped furnace at 135$0^{\circ}C$ and optimum growth condition was growth rate 5-8mm/hr, rotation rate 30-40rpm. When crystal was growing, atomosphere was oxidized condition, and grown single crystal was annealed at 110$0^{\circ}C$. The rutile single crystals were oriented to [001] direction and color change of single crystals were related to atmosphere, and difference of electric conductivity and resistance was due to the fact above.

• Tribology and Lubricants
• /
• 제38권6호
• /
• pp.227-234
• /
• 2022

Recently, the demand for improving energy efficiency has rapidly increased because of the growing concerns over environmental issues. In this work, the tribo-test and simulation for the initial wear and lubrication performance were performed for the piston pin in the small end system of the connecting rod of a marine engine, to obtain useful data for improving the efficiency of marine engine systems. In addition, a diamond-like carbon (DLC) coating was applied to the piston pin to explore feasibility of eliminating the bush used in the system. The initial wear and lubrication characteristics between the uncoated piston pin and bush were compared with that between the DLC-coated piston pin and connecting rod in the tribo-test. The simulation for the wear and lubrication performance according to the wear progression was conducted based on the data obtained from the test. The wear characteristics were quantitatively assessed by the wear depth and wear volume, and the lubrication performance was characterized with the change of pressure and minimum oil film thickness with respect to the crank angle. It was found that the DLC-coated piston pin may provide better initial wear characteristics and lubrication performance. The results of this work may provide fundamental information for marine engines with improved efficiency.

• 대한건축학회논문집:구조계
• /
• 제34권6호
• /
• pp.3-10
• /
• 2018

This paper described the shear strengthening effect by deviator location in pre-damaged reinforced concrete (RC) beams strengthened with externally post-tensioning steel rods. Three reinforced concrete beams as control beam and eight post-tensioned beams using external steel rods were tested to fail in shear. The externally post-tensioning material was a steel rod of 22 mm diameter, and it had a 655 MPa yield strength and an 805 MPa tensile strength. Specimens depend on multiple variables, such as the number of deviators, location of deviator, and load pattern. The pre-damaged loads up to about 2/3 of ultimate shear capacities were applied to specimens using displacement control and the diagonal shear crack just occurred at these loading levels. And then, the post-tensioning up to when a strain of steel rod reaches about $2000{\mu}{\varepsilon}$ was continuously applied to beam. A displacement control was changed to a load control during post-tensioning. The post-tensioning resulted in increase of load-carrying capacity and restoration of existing deflection. Also, it prevented the existing diagonal cracks from excessively growing. Two deviators effectively improved the load capacity when compared with in case of test which one deviator at mid-span installed. When deviators were located near region which the diagonal crack occurred on, the strengthening impact by post-tensioning was greater.

• 한국미생물·생명공학회지
• /
• 제19권6호
• /
• pp.543-547
• /
• 1991

토양으로부터 호알칼리성 미생물을 분리하여 동정 한 결과, Bacillus속의 특성을 나타내어 Bacillus sp. SH-8로 명명하였다. Bacillus sp. SH-8은 초기 pH 9.0이상의 알칼리에서만 생육이 가능하였으며 중성 pH에서는 불가능하였다. Bacillus sp. SH-8로부터 U.V.조사에 의해 중성배지에서도 생육이 가능한 변이주를 분리하여 Bacillus sp. SH-8M으로 명명하였으며, 초기 pH 6.9부터 11.0까지 생육이 가능하였다. 따라서 이들 두 균주는 pH 변화에 따른 생육과 효소생산을 비교, 검토하는데 적합한 균주로 생각된다.