• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.211-212
• /
• 2023

Building Information Modeling (BIM) design has been mandatory in Korea since 2016, and it has been gradually expanding in the industry, with a slow attempt to apply it in remodeling constructions. This is because Korea is facing a situation where many buildings are over 30 years old and require remodeling or reconstruction. The remodeling industry is also a growing market, as it saves construction time and cost compared to reconstruction. BIM is an ideal technology element for a competitive remodeling construction, as remodeling constructions face a complicated construction process from the start, including demolition, maintenance, and reinforcement to save the change process. However, there are still limitations in applying BIM to remodeling constructions, due to considerations of the existing building and the complicated requests of the inhabitants. BIM still has technical and environmental limitations for general use. In this study, I analyzed BIM application cases from existing studies and suggest what improvement points should be strengthened.

• Transactions of Materials Processing
• /
• v.31 no.1
• /
• pp.29-38
• /
• 2022

Recently, the composite material market is gradually growing. Various composite forming processes have been developed in order to reduce the production cost of the composite material. Unlike the conventional forming process, the microwave composite forming process has the advantage of reducing the processing time because the composite material is heated directly or indirectly at the same time. Due to this advantage, in this study, a double cantilever beam test was conducted with specimens manufactured by the microwave composite forming process. The purpose of this study was to compare mode-I energy release rate for specimens manufactured by prepreg compression forming and microwave composite forming processes. First, a microwave oven was proposed to conduct the microwave composite forming process. Double cantilever beam specimens were manufactured. After that, the double cantilever beam test was conducted to obtain the mode-I energy release rate. Mode-I energy release rates of specimens manufactured by the microwave composite forming and prepreg compression forming processes were then compared. As a result, mode-I energy release rates of specimens fabricated by the microwave composite forming process were similar to those fabricated with the prepreg compression forming process with a relatively reduced process time.

• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.660-675
• /
• 2020

Since Industry 4.0, there is a growing interest in smart manufacturing across all industries. However, there are few studies on this topic in the garment industry despite the growing interest in implementing smart manufacturing. This paper presents the feasibility and essential considerations for implementing smart manufacturing in the garment industry. A systematic review analysis was conducted. Studies on garment manufacturing and smart manufacturing were searched separately in the Scopus database. Key technologies for each manufacturing were derived by keyword analysis. Studies on key technologies in each manufacturing were selected; in addition, bibliographic analysis and cluster analysis were conducted to understand the progress of technological development in the garment industry. In garment manufacturing, technology studies are rare as well as locally biased. In addition, there are technological gaps compared to other manufacturing. However, smart manufacturing studies are still in their infancy and the direction of garment manufacturing studies are toward smart manufacturing. More studies are needed to apply the key technologies of smart manufacturing to garment manufacturing. In this case, the progress of technology development, the difference in the industrial environment, and the level of implementation should be considered. Human components should be integrated into smart manufacturing systems in a labor-intensive garment manufacturing process.

• Applied Microscopy
• /
• v.11 no.1
• /
• pp.51-57
• /
• 1981

The process of the formation of polyhedra occlusion bodies and occlusion of viral nucleocapsids of Autographa californica Nuclear Polyhedrosis Virus in Spodoptera frugiperda cell were photomicrographed and described. Progeny viral nucleocapsids were observed in the nuclei of the host cells, bundled and then enveloped. The nucleoapsids were mainly accumulated near the membrane-like profiles. The nuclear membrane were hypertophied up to the cytoplasmic membrane. Prepolyhedral bodies were observed and they were growing with the accumulations of thread-like materials(polypeptides) produced by viral genes. The bundled and enveloped nucleocapsids were occluded into the growing polyhedra.

• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.119-131
• /
• 1986

The purpose of the study is to note the effects of the resection of the lateral pterygoid muscle on the mandibular growth in the growing rats. Twenty four female Wistar rats were used in the experiment. They were divided into three groups: group 1 ; bilateral sham operation group 2 ; bilateral resenction of the lateral pterygoid muscle group 3 ; unilateral resection of the lateral pterygoid muscle (The right lateral pterygoid muscle was resected and the left one was sham-operated.) Groups 1&2 were sacrificed eight weeks lateral and group 3, four weeks later. All specimens were measured with calipers, and stained with hematoxylin and eosin. Groups 1 & 2 were compared with each other. In group 3, the right side was compared with the left. The results were as follows: 1. In the growing rats, the resection of the lateral pterygoid muscle was followed by a decrease of the mandibular growth. After eight weeks, the condyle-mental foramen distance, the angular process-mental foramen distance, the size of the condylar head, the supradentale-first molar distance, and the diameter of the symphysis were significantly smaller than the control. 2. Resection of the lateral pterygoid muscle resulted in decrease of the thickness of the cartilage layer and the prechondroblastic-chondroblastic layer after four weeks. 3. After eight weeks, group 1 and group 2 were not different significantly in the histologic sections. 4. The condylar cartilage was stabilized eight weeks after the experiment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.3
• /
• pp.480-487
• /
• 1997

The present study was designed to examine how Ca intake contributes to the increase of peak bone mass with growing female rats. Weaned rats were fed experimental diets consisting in five levels of Ca; very low(0.1%), low(0.2%), moderate(0.5%), high(1.0%) and very high(1.5%) for 4, 8 and 12 weeks. Bone growth, metabolism and Ca metabolism were determined. As for the rats fed for 4 weeks, the bone weight, length and breaking force and bone metabolism were not significantly affected by dietary Ca levels, whereas the current intakes of Ca were observed to have significantly affected the rats fed for 8 or 12 weeks with regard to the bone weight, length and breaking force and bone metabolism. The bone ash and Ca contents of the rats were affected by dietary Ca levels for the total period of feeding. It is suggested that dietary Ca itself affected the mineralization process either during the growth or later, although the resulting bone mass is not a linear function of dietary Ca content.

• Journal of Digital Convergence
• /
• v.11 no.3
• /
• pp.59-71
• /
• 2013

Cloud service (Amazon Web Services, etc.) to take advantage of the growing global competitiveness of small and medium companies with online services (eg Zynga, paprika wrap) are strenthening the growing global competitiveness by taking advantage of cloud utilization, and financial market analysis services by cloud use have appeared, but the domestic company's cloud still staying in the low-level. SMEs in Korea IT infrastructure needs as well as commercial services such as simulation, test environment configuration, to perform tasks that require a step-by-step in the product development process, which requires different IT Infrastructure Outsourcing workforce commitment, according to the rapid changes in the size of the organization's efficient IT infrastructure such as cloud services because of the lack of capacity to respond to a sudden demand for IT measures required.

• Korean Journal of Materials Research
• /
• v.15 no.8
• /
• pp.548-553
• /
• 2005

Trivalent cerium$(Ce^{3+})$ activated YAG (yttrium aluminum garnet, $Y_3Al_5O_{12})$) thin films phosphor were deposited on quartz glass substrates by rf magnetron sputtering. The effects of sputtering parameters, annealing atmosphere, and substrates on growing behaviors and luminescent properties were investigated. The sputtering parameters were $O_2/(Ar+O_2)$ gas ratio, rf power, and deposition time. XRD (X-ray diffractometery) spectra exhibited that as-deposited films were amorphous, while they were transformed to the crystalline phases by post-annealing. The crystallinity and the atomic ratio strongly depended on the sputtering gas ratio $O_2/(Ar+O_2)$. High quality YAG:Ce thin films could be obtained at the gas ratio of $50\%$ oxygen. After annealing process, PL (Photoluminescence) spectra excited at 450nm showed a yellow single band at 550nm. The films deposited at the sputtering gas ratio of 50% oxygen exhibited the highest PL intensity.

• Journal of the Korean Ceramic Society
• /
• v.29 no.10
• /
• pp.822-826
• /
• 1992

SiO2 doped sapphire single crystals were grown by Verneuil method using feed material which prepared by adding SiO2 in Al2O3. Crystal growing were attempted with varing doping amount of SiO2 from 0.01 to 1.0 wt% and when the doping amount of SiO2 were 0.01~0.04 wt%, single crystals could be attained. Starting materials for feed powder were 99.99% purity alumina and extra pure SiO2 powder. Mixing these two materials by wet milling for 24 hours and drying the mixture and then was calcined at 900~110$0^{\circ}C$ for 2~4 hours. The grown crystals had yellowish color and were somewhat transparent. During growing process the flow range of oxygen was 5~7.5ι/min and of hydrogen was 13~25ι/min, the average growth rate was 7.0~11 mm/hr. The pressure of gases were fixed at 5psi. The color of crystal was appeared and mechanical property of sapphire was developed by doping of SiO2.

• Journal of the Korean Ceramic Society
• /
• v.20 no.4
• /
• pp.324-332
• /
• 1983

In this studies resistivity thermal expansion and microstructure of the Forsterite Porcelain as a high frequency insulator were investigated. The body containing Zn-glass shows higher resistivity than any other body. The bodies containing K, Ba, Cd-glass respectively consist of fine crystals of mosaic type. The bodies containing Bi, Zn, Zr-glass repectively included more large crystals because of the grain growth and coherence of fine particles In the 4 series Forsterite containing excess MgO 0-6% the thermal coefficients of the bodies increased with the increasing of excess MgO and the bodies have conspicuously high thermal expansion coefficients when 15% excess $BaCO_3$ was added to. The resistivities of additive bodies of $BaCO_3$ 0, 5, 10% in Forsterite containg excess MgO 2% are higher than any other that of composition. Bacause the growing of Forsterite crystals was restrained with the increasing of excess MgO $BaCO_3$ their grain size became fine and their grain boundaries were decomposed and also the glass phase having high refractive inder was increased. The higher the firing temperature increased the more the process of crystal growing was progressed.