• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.697-703
• /
• 2008

Excessive water leakage phenomenon happens through damage of nation core zone of about 17,000 storage of water facilities or collapse of dam is worried, is being damaged or enforce dilapidated fill dam core zone's repair reinforcement. Example that use grouting method of construction considering construction and economic performance etc. recently by repair reinforcement way about defect of dam is increased. Permeation grouting method repair & reinforcement of fill dam countermeasure is preferred in nation. Do that is economical to decide these repair reinforcement effect and grouting effect estimation method that do not give damage to dam is effective. Therefore, observing electricity resistivity Survey change of dam since grouting reinforcement using Electric resistivity Survey inquiry of seismic survey method in this research, Wished to verify grouting effect whether is possible as Electric resistivity Survey, and study whether integrity of dam through repair reinforcement defined.

• 한국환경과학회지
• /
• 제16권6호
• /
• pp.735-743
• /
• 2007

A grouting method is the way to effectively prevent pollutants from spreading into the ground during the digging process of groundwater. This study, based on the comparative study of grouting methods being generally accepted, suggests various construction methods which are suitable for geological structure as follows: In Jeju Island, it is very likely that rocks may fall in shuttered zones such as cracks, joints, scoria layers, and clinker layers. For this reason, it is recommended that materials be injected from the bottom toward the top, not from the top to the bottom. In the case where the amount of injected materials become too large in the areas of cracks or joints because of high level of permeability coefficient, grouting materials which smeared into surrounding areas may cause unwanted cut in the aquifer of the bottom level. To avoid this, the amount of water should be reduced from the typical water-cement ratio of 1:2, and grouting materials with larger grading should be used. If the deep excavation of ground is made in Jeju Island, it is likely to have lots of voids because of geological characteristics. Based on the results of this research, it is found that to construct interior casing, the centralizer should be attached to the casing to prevent the casing from being in contact with the counter fort. The grouting in Jeju Island should be thicker than usual. To avoid over-use of grouting materials, to prevent grouting in more than necessary zone, and to facilitate grouting of void areas, the flexible selection of materials is required. And, to exactly figure out the interior of dug well, an examination through CCTV should necessarily be performed when grouting work is in progress.

• Geomechanics and Engineering
• /
• 제12권1호
• /
• pp.35-52
• /
• 2017

In order to evaluate the grouting effects of water-rich fault in tunnels systematically, a feasible and scientific method is introduced based on the extension theory. First, eight main influencing factors are chosen as evaluation indexes by analyzing the changes of permeability, mechanical properties and deformation of surrounding rocks. The model of evaluating grouting effects based on the extension theory is established following this. According to four quality grades of grouting effects, normalization of evaluation indexes is carried out, aiming to meet the requirement of extension theory on data format. The index weight is allocated by adopting the entropy method. Finally, the model is applied to the grouting effects evaluation in water-rich fault F4-4 of Qingdao Jiaozhou Bay Subsea Tunnel, China. The evaluation results are in good agreement with the test results on the site, which shows that the evaluation model is feasible in this field, providing a powerful tool for systematically evaluating the grouting effects of water-rich fault in tunnels.

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.273-283
• /
• 2003

일반적으로 터널이 풍화암, 파쇄대 또는 토사 구간을 관통할 경우, 터널의 구조적 안정을 확보할 목적으로 그라우팅으로 지반을 보강한 후에 터널 굴착을 하게 된다. 터널 시공의 안정성과 경제성을 확보하려면 각 지반조건에 적합한 공법을 선택하여 그라우팅 설계와 시공이 진행되어야 하고, 신뢰성 있는 그라우팅의 시공을 위해서는 그라우팅 시공 후 그라우팅의 성능평가가 이루어져야 한다. 지금까지의 그라우팅의 평가는 한정된 개수의 코아에 대한 압축강도 시험으로 수행되었으나, 이러한 방법으로는 보강된 지반의 전반적인 그라우팅 성능 평가 및 보강 효과의 정량화에 다소 정확성이 결여될 소지가 있다. 본 연구에서는 코아 채취를 통한 일점식 평가를 탈피하고자 SASW 기법을 도입하여 그라우팅의 정량적 성능평가 방법을 모색하고자 하였다. SASW기법은 재료의 표면에서 비파괴적으로 탄성파를 발진하고 전파된 탄성파를 측정하여 재료의 내부강성구조를 평가하는 방법으로, 지반의 전단강성 구조 및 콘크리트 구조물의 비파괴 건전도 평가 등에 주로 활용되는 기법이다. 본 연구에서는 터널 1차 라이닝(shotcrete) 표면에서 SASW 실험을 수행하여 터널 원지반에 대한 우레탄 보강의 효과를 터널 원지반의 전단강성 증가와 원지반내의 내부 공동 또는 균열 확인 등의 측면에서 평가하고자 하였다. 그리고, 본 연구에서 제안한 방법의 신뢰성 및 현장적용성을 확인하기 위하여, 실제 경기도 OO철도 터널에서의 우레탄 그라우팅 성능평가에 본 연구에서 제안한 방법을 시험 적용하였다.

• 한국농촌건축학회논문집
• /
• 제21권4호
• /
• pp.45-52
• /
• 2019

Chemical grouting method is mainly used for construction of dams and reservoirs, stabilization and reinforcement of slopes, reinforcement of soft grounds such as embankments, dredging and landfills, the order of earthquake response method, and the reinforcement of structures. Recently, it is widely applied in construction sites such as highways, airfields, high-speed railways, subsea facilities, port construction works, tunnels, and subway works. As such, the demand for grouting continues to increase. The development of the grouting method was focused on increasing the strength of the ground, and the development of the chemical additives, the injection device, and the stirring device were mainly performed. But ordinary portland cement used for grouting is a product that consumes natural resources such as limestone, generates a large amount of greenhouse gases, consumes a large amount of energy sources, and it is time to develop products and new methods to replace them. In this study, Ordinary Portland Cement and New Grouting Binder (circulating fluidized bed boiler fly and blast furnace slag) were compared and analyzed by the following test. Homo-gel strength and homo-gel time, water quality analysis of the water used and soil contamination process tests of homo-gel samples were performed. In the case of NGB, when Using water is used as the reservoir water, the strength measured smaller than that of the other water. However, it shows about 2.5 times greater than the homo-gel compressive strength applied to OPC (7-day, reservoir water), so there is no problem with water quality when applied.

• 한국안전학회지
• /
• 제23권4호
• /
• pp.79-84
• /
• 2008

Auto injector grouting method as low pressure injected by using epoxy and Boyle's law is very excellent method in economical efficiency and construction work because injected process can be dealt with collectively. For estimation of filling capacity purpose of this study compared the Auto injector method with the piston injector method. In this study, the tests allow for width of crack, injected angle of epoxy resin and injected method were performed using concrete block specimen making artificial crack. The results of test, tilling et1iciency of epoxy by Auto Injector grouting method verify to better than the piston injector method and uniaxial strength increased about 11% than standard specimen.

• Geomechanics and Engineering
• /
• 제19권3호
• /
• pp.217-227
• /
• 2019

This study focuses on an improved prediction model to determine the limiting grouting pressure of compaction grouting considering the ground surface upheaval, which is caused by the three-dimensional conical shearing failure. The 2D-dimensional failure curve in Zou and Xia (2016) was improved to a three-dimensional conical shearing failure for compaction grouting through coordinate rotation. The process of compaction grouting was considered as the cavity expansion in infinite Mohr-Coulomb (M-C) soil mass. The prediction model of limiting grouting pressure of compaction grouting was proposed with limit equilibrium principle, which was validated by comparing the results in El-Kelesh et al. (2001) and numerical method. Furthermore, using the proposed prediction model, the vertical and horizontal grouting tube techniques were adopted to deal with the subgrade settlement in Shao-huai highway at Hunan Provence of China. The engineering applicability and effectiveness of the proposed model were verified by the field test. The research on the prediction model for the limiting grouting pressure of compaction grouting provides practical example to the rapid treatment technology of subgrade settlement.

• 대한토목학회논문집
• /
• 제40권4호
• /
• pp.409-415
• /
• 2020

노후 지방도 급경사지 도로구간의 지하수 등으로 인한 토립자 유출 및 침하가 발생하여 도로 통행에 대하여 안전성을 확보하기 위하여 통행 중인 구간을 최대한 보존하며 시공성을 고려한 저유동성 몰탈형 주입공법 그라우팅 기술이 선정되었다. 특히, 공사 중 과도한 주입압력에 의한 도로하부의 수압파쇄, 급경사지의 토립자 유출 및 도로의 융기 등의 피해가 발생할 우려가 있어 기존 일반적인 저유동성 공법을 새롭게 개선하여 적용하였다. 본 연구는 ◯◯도 ◯◯군에서 발주한 ◯◯고개지구 급경사지 붕괴 위험지역 정비공사로 도로 지반 보강공사 현장에서 수행하였다. 본 연구에서는 개선된 저유동성 몰탈형 그라우팅공법은 새로운 자동화그라우팅 관리시스템을 적용하였으며 특히, 고압조건 예비그라우팅시험에 의한 그라우팅 시공조건 결정 및 개선된 자동화 그라우팅 시스템을 이용한 주입시공 기술을 포함하며, 또한, 개선된 기술의 주입효과평가를 위한 연구를 수행하였다. 개선된 저유동성 몰탈형 그라우팅공법의 적용으로 노후 도로 침하, 건축물 및 토목 구조물의 부등침하 방지 및 지하수 유출 구간에 대한 토립자 유출 방지 등 도로 유지관리 공사 시 원활하게 운영할 수 있는 근거를 마련할 수 있었다. 또한, 향후 노후 도로 침하방지 그라우팅 공사뿐만 아니라 다양한 건축물 및 토목구조물(철도, 지하철, 교량, 지하구조물, 전석 및 석회석 공동구 등) 그라우팅 공사에 적용될 수 있는 가능성을 확인하였다.

• 산업기술연구
• /
• 제29권B호
• /
• pp.73-80
• /
• 2009

This paper is to investigate effect of B.G.I (Best Grouting Innovation) method on reinforcing ground. In this thesis, extensive literature review was performed to summarize theoretical backgrounds of grouting and to compare the applicability of different grouting methods. Unconfined compression test with specimen prepared by injecting different grouts of B.G.I, S.G.R and L.W methods and by changing the curing time were carried out to figure out characteristics of initial unconfined compression strength mobilized in the early stage. As results of test, the compression strength increases with curing times and specimen prepared with grouts of B.G.I method show greater values than others. On the other hands, the measured values of pH are in the range of 7-10 during tests. In field, preliminary construction to main construction at several sites were performed to confirm the effect of reinforcing the ground by application of B.G.I method. From the results of permeability test in field, SPT test and phenol reaction test, it was found that N values after grouting are greater than those before grouting and values of permeability in grouted ground is reduced significantly.

• Smart Structures and Systems
• /
• 제33권1호
• /
• pp.41-53
• /
• 2024

Grouting sleeves are an essential connecting component of prefabricated components, and the quality of grouting has a significant influence on structural integrity and seismic performance. The embedded grouting sleeve (EGS)'s grouting defects are highly undetectable and random, and no effective monitoring method exists. This paper proposes an ultrasonic guided wave method and provides a set of guidelines for selecting the optimal frequency and suitable period for the EGS. The optimal frequency was determined by considering the group velocity, wave structure, and wave attenuation of the selected mode. Guided waves are prone to multi-modality, modal conversion, energy leakage, and dispersion in the EGS, which is a multi-layer structure. Therefore, a time-reversal (TR)-based multi-mode focusing and dispersion automatic compensation technology is introduced to eliminate the multi-mode phase difference in the EGS. First, the influence of defects on guided waves is analyzed according to the TR coefficient. Second, two major types of damage indicators, namely, the time domain and the wavelet packet energy, are constructed according to the influence method. The constructed wavelet packet energy indicator is more sensitive to the changes of defecting than the conventional time-domain similarity indicator. Both numerical and experimental results show that the proposed method is feasible and beneficial for the detection and quantitative estimation of the grouting defects of the EGS.