• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.91-99
• /
• 2005

Flight compatibility certification is performed to substantiate the compatibility between ALQ-X ECM pod and KF-16D/RF-4C aircraft. A certification plan for the ALQ-X flight compatibility is established. Similarity analysis, mass/inertia analysis, structural analysis/test, and ground vibration test/flutter analysis are made to support the safety of MIL-HDBK-1763 Test 250 (Captive compatibility flight profile). Aircraft flew along flight envelope boundary with representative ALQ-X configurations. Handling qualities are evaluated by comparing flight characteristics of the aircraft with and without ALQ-X. Structural integrity and endurance is evaluated using measured flight test data. Results of these flight tests showed that ALQ-X is compatible with KF-16D/RF-4C without altering the flight envelope which has originally been certified for ALQ-88 and ALQ-119 ECM pods. ALQ-X certification program made following technical achievements: Type III certification for foreign designed fighter, flutter analysis program development using GVT results, and utilization of MIL-STD-1553B data bus in flight test.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.3
• /
• pp.75-83
• /
• 2016

There are various types of disasters now, and accordingly it is practically difficult to manage all types of disasters effectively. If we are able to reconstruct the disaster event and investigate the cause, it may be possible to prepare the recurrence of similar patterns of disasters. The vehicle-based system equipped with state-of-the-art sensors has been proposed in order to reconstruct the disaster site as much as possible and help the disaster investigator to analyze the cause of the disaster by providing high-quality information. However, the data quality obtained from the sensors can be lowered due to unpredictable circumstances of disaster site. In this aspect it is essential to provide practical procedures that assess and analyze the performance of the equipment on site. In this paper, we selected critical elements of performance that can evaluate the vehicle-based image acquisition system, since it is the most critical piece of information in the disaster sites. The quality of the images obtained from vehicle-based image system was analyzed and verified on the test site. From the results of spatial resolution based on GRD(Ground Resolved Distance), we were able to identify maximum 5mm of spatial resolution at a distance of 70m distance. The result of field test is expected to be used for data acquisition plan in future disaster situations.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.6
• /
• pp.57-65
• /
• 2014

Recently, Construction business is changing from on the ground to underground space because of deficit of developing space, creation of green space and of incremental of land compensation expenses. Meanwhile, 3D Topographic, Marine and Cadastral maps need to have Spatial Interrelation. Also, understanding of the information is also needed. Spatial information object registration system is impossible to contact and understanding intelligence mutually because the former one is managed as automatic ID system. Therefore, 3D Object information ID System of underground space is managed based on Object Identifier. Construction of Spatial information integration ID System is required and it will offer Division Code (Ground, Index, Underground) and depth information. We are defined and classified Under Spatial Information in this paper. Moreover, we developed the integration ID System based on UFID for cadastral information Construction. We supposed underground spatial information DB Construction and a developed the way of exploiting 3D cadastral information system through the study. The research result will be the base data of Standard ID system, DB Construction and system Development of National spatial data which is considered together with spatial interrelation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.163-171
• /
• 2014

Based on the GPS/IMU integration, the car navigation has unstable conditions as well as drastically reduces accuracies in urban region. Nowadays, many cars mounted the camera to record driving states. If the ground coordinates of street furniture are known, the position and attitude of camera can be determined through SPR(Single Photo Resection). Therefore, an estimated position and attitude from SPR can be applied measurements in Kalman filter for updating errors of navigation solutions from GPS/IMU integration. In this study, the GPS/IMU/SPR integration algorithm was developed in loosely coupled modes through extended Kalman filters. Also, in order to analyze performances of GPS/IMU/SPR, simulation tests were conducted in GPS signal reception environments and the GCPs (Ground Control Points) distributions. In fact, the position and attitude gathered from GPS/IMU/SPR integration are more precise than the position and attitude from GPS/IMU integration. When IPs (image points), corresponded to GCPs, were concentrated in the center of image, the position error in the optical axis respectively increased. To understand effects from SPR, we plan to carry additional test on the magnitude of GCP, IP and initial exterior orientation errors.

• Journal of the Korean Institute of Rural Architecture
• /
• v.1 no.1
• /
• pp.3-14
• /
• 1999

It is a important problem that the adjustment of a rural settlementas a unit of rural community, and many number of researcher tackled its. The aim of this paper is to verificate the process of rural con-struction, that is applied the regional resources, and to introduce the situation of attending inhabitants, and their employments as a results of this planning. We chose Odaira hamlets in Oomama town, it is located in Gunma prefecture as an object of this study. Odaira is a small village in the mauntain, and it is composed only 135 families. Odaira is an underpopulated hamlet. It is engaged no lively farming and forestry. Most of inhabitants are commuting to the cities around here. Inhabitants of Odaira who are conscious of the conditions of declining hamlet organized a group to improve it. This group have investigated all around the hamlet as a system of workshop. And they found the resources for sight-seeing, crops as the regional products, and other resources for rural planning under three keywords ; resources for the sight-seeing, the rigional products, and theimprovement of environments. In many resources, most important thing was the existens of a stalactite cave come down as a legend from old time. Local government of Oomama town and the inhabitants tried to explorate of stalactite cave and succesed to excavate it. They have constructed two facilities for management, parkaround the stalactite cave and these have been a new place of work for inhabitants. Arrangement of the rural constructions developed to other items schemed acording to the master plan, like as a camping ground, bungalows, a wet botanical garden, and a park beside a river. These also produced the new places of work for 54 people as a result of this rural planning. The most of them were the aged peoples and the women of farmer. The highest age was 83 years old, he is working at the camping ground. In the employment system at Odaira, people who desire to work and desire to employ both registrate to a commission of management of Odaira, and this commission arrange them in case of needs.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.593-603
• /
• 2010

Most spatial data acquisition systems employing a set of frame cameras may have suffered from their small fields of view and poor base-distance ratio. These limitations can be significantly reduced by employing an omni-directional camera that is capable of acquiring images in every direction. Bundle Block Adjustment (BBA) is one of the existing georeferencing methods to determine the exterior orientation parameters of two or more images. In this study, by extending the concept of the traditional BBA method, we attempt to develop a mathematical model of BBA for omni-directional images. The proposed mathematical model includes three main parts; observation equations based on the collinearity equations newly derived for omni-directional images, stochastic constraints imposed from GPS/INS data and GCPs. We also report the experimental results from the application of our proposed BBA to the real data obtained mainly in urban areas. With the different combinations of the constraints, we applied four different types of mathematical models. With the type where only GCPs are used as the constraints, the proposed BBA can provide the most accurate results, ${\pm}5cm$ of RMSE in the estimated ground point coordinates. In future, we plan to perform more sophisticated lens calibration for the omni-directional camera to improve the georeferencing accuracy of omni-directional images. These georeferenced omni-directional images can be effectively utilized for city modelling, particularly autonomous texture mapping for realistic street view.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.105-135
• /
• 2007

Since now, the study of wooden pagodas in ancient Korea have been proceeded to the site plan, the devices and the goods of sarari containers and the reconstruction. They are based on the result of archaeological excavations and the historical material documents. But the study of the foundations of wooden pagodas have been unsatisfactory. In this paper, the investigations of the wooden pagodas in the Three Kingdoms are proceeded. Through this action, we have checked the method of the foundations, the type and installation of Simchoseok(central base stone) and the erection of Simju(central base pillar). In the result of this study, three types were in the method of the foundations-the construction of the upper on the surface of the earth, the construction of the upper and lower on the surface of the earth. And we know the types of the installation of Simchoseok were the underground-type central base stone and the ground-type central base stoned. The factors of the central base pillars were changed with the rising of central base stones from the lower on the surface of the earth to the surface of the foundation. This change was needed to construct the larger wooden pagodas than the ones of the past. In especially, the large wooden pagodas with the ground-type central base stoned were appeared in the king of Baekje, Muwang(A.D. 600~640). We assume that the method of the construction of larger wooden pagodas like that was forwarded to Silla and Japan.

• Journal of Convergence for Information Technology
• /
• v.11 no.5
• /
• pp.111-117
• /
• 2021

With the rapid development of advanced science and technology including the 4th industrial revolution, the future battlefield environment is evolving at a rapid pace. In order to actively respond to issues such as reduction of military resources and shortening of service period, and to emphasize the realization of human-centered values, the Ministry of National Defense is re-establishing the role of the Army in accordance with the defense reform and is promoting the Warrior Platform, a next-generation individual combat system. In this paper, we intend to present the optimal warrior platform architecture suitable for the Korean Army by realizing the concept of future ground operations and analyzing overseas cases. We analyze the essential abilities required of individual combatants and the abilities required for each unit type, and specifically presents a plan for integration and linkage of warrior platform equipment. We also propose an efficient business promotion direction by presenting the data flow and power connection diagram between the devices that need integration and interworking.

• Journal of Korea Water Resources Association
• /
• v.55 no.11
• /
• pp.913-922
• /
• 2022

The purpose of this research is to propose the measurement of improving DEM by using the water surface range of SAR image analysis for river corridors and to suggest the construction of satellite-based 3D river spatial information of inaccessible regions such as North Korea. For this research, it has been progressed from the accessible area, watershed of Namgang river, the branch of Nakdonggang river. The satellite image was collected from SAR satellite image data for a year in 2021 which was provided by ESA from Sentinel-1A/B data and extracted from the seasonal water surface area. Ground gauge water level was collected from hourly intervals data by WAMIS. The DEM was improved by analysis of the river altitude of water surface area change by the combination of the ground water level of minimum to maximum water surface area data extracted from SAR image analysis. After the improvement of DEM, the altitude of the river varied that it is defined to comprise more natural form of river DEM than the existing DEM. The correction validation of improvement DEM was necessary in field survey elevation data; however, the correction validation was not progressed due to the absence of the data. Although, the purpose of this research is to provide the improvement of DEM by using the analyzed water surface by existing DEM data and SAR image analysis. After the progression of additional correction validation research, we would plan to examine the application in other places and to progress the additional methodological research to apply in inaccessible and unmeasured area including the North Korea.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.6
• /
• pp.84-95
• /
• 2022

The landscaping of Amore-Pacific's new building has received various awards since its construction. This study attempted to identify the mechanisms of planning, design, and construction of this project through the ground theory. The results of the study are summarized as follows. The client's place attachment of the sites, which was the company's parent, was the driving force for an international design competiton in which architecture and landscaping were integrated. After that, in the detailed design stage for the actual implementation of the contest-winning plan, competent local designers and contractors were selected, and a consultative body was operated to engage in various opinions and promote rational decision-making. As for consultative body's operation method, simulation, physical model production, and detailed drawings were created after sharing opinions, and landscape design supervision played a major role. Establishing consistency in design and construction through integrated planning and landscape design supervision is required to cultivate craftsmanship and foster landscape coordinators in today's industrialized practice. The accumulation of related follow-up studies and supplementation of the system is anticipated.