• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.980-986
• /
• 2004

So far systematic and reliable methods for the investigation of track substructure (ballast and subgrade) are not developed yet. This study presents the applicability of GPR (Ground Penetrating Radar) and PBS (Portable Ballast Sampler) to the evaluation of railway trackbed conditions. Including FWD (Falling Weight Deflectometer) often used to evaluate the subsurface conditions of pavement, the standard system for assessing trackbed conditions will be developed in the future.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.31-34
• /
• 2006

Laboratory experiment of polarimetric GPR measurement was conducted for the purpose of estimating subsurface inhomogeneity. Tow realization of inhomogeneous subsurface media were made by burying stone objects of different dimensions in homogeneous dry sand. Polarization ratio of cross polarization to co polarization data were examined to find their obviously distinguishable behavior.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1113-1118
• /
• 2004

Ballasted track is constructed in consideration of the maintenance. The application time and frequency of MTT(Multiple Tie Tamper) and BS(Ballast Cleaner) depend on track geometry measurements. This paper presents the application of Ground Penetrating Radar(GPR), Falling Weight Deflectometer(FWD), and Portable Ballast Sampler (PBS) to evaluate the effects of track geometry due to substructure deterioration and to build a reliable substructure evaluation system.

• Electronics and Telecommunications Trends
• /
• v.15 no.5 s.65
• /
• pp.86-93
• /
• 2000

지하 탐사용 레이더를 이용하여 지하에 매설된 구조물의 위치를 파악하고 그에 따른 근사 이미지의 추출 방법을 제안하였다. 기본원리는 구조물에 의해 산란되어 수신 안테나로 유입되는 펄스신호의 지연시간과 크기를 측정하는 데 있으며, 측정의 실용성을 위하여 레이더 탐색경로에 따른 수신신호의 절대치 적분 방법을 사용하였다. 일반적으로 지하매질은 침투 주파수에 따라서 다양한 분산 및 손실 특성을 나타내는데, 이러한 매질 특성은 다항 Debye 모델을 이용하여 기술되었다. 3차원 전파(電波) 전파(傳播)를 위한 시뮬레이션에는 FDTD(Finite Difference Time Domain) 방법을 사용하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.626-629
• /
• 2006

Suk-San highway bridge, located on a soft ground environment, had been examined the current condition of settlement estimation throughout G.P.R(Ground Penetrating Radar), general observation and visual observation(video camera & scope). According to the above observations, the ground of this area has sunk about thirty centimeters since 1996. Also, currently, Suk-San highway bridge has been disjoining the gap between the structure and ground. Therefore, it is necessary to fill it up the gap. The purpose of this paper is to report the effects of Sunk-San highway bridge was observed by G.P.R. & general observation etc. and to present the results of repair of Suk-San highway bridge filling the gap up.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.380-387
• /
• 2012

A complex seismic survey, which is nondestructive inspection, is used often recently in estimating the location of reclaimed cultural assets. Such a method is the best way to estimate the location of cultural assets most effectively in a short time at a construction site. This study estimated the reclamation location of a cultural asset by using magnetic gradient survey, earth resistivity survey, and ground penetrating radar survey (GPR) in order to figure out the distribution territory in the area with possibility of creation of reclaimed cultural assets in the past. As a result, it was located at +15m on the X axis and +90m on the Y axis on the floor plane coordinate of the study target area. It was shown that the major axis is about 20m long in the north-northeast direction and the width is about 5m. The depth of development distribution of anomaly zone was estimated as about 1.5~3.0m. Geophysical survey is expected to be used as a efficient and accurate way to excavate the reclaimed cultural assets in future.

• International Journal of Highway Engineering
• /
• v.19 no.5
• /
• pp.69-75
• /
• 2017

PURPOSES : The purpose of this study is to evaluate different types of Ground Penetrating Radar (GPR) testing for characterizing the road cavity detection. The impulse and step-frequency-type GPR tests were conducted on a full-scale testbed with an artificial void installation. After analyzing the response signals of GPR tests for detecting the road cavity, the characteristics of each GPR response was evaluated for a suitable selection of GPR tests. METHODS : Two different types of GPR tests were performed to estimate the limitation and accuracy for detecting the cavities underneath the asphalt pavement. The GPR signal responses were obtained from the testbed with different cavity sizes and depths. The detection limitation was identified by a signal penetration depth at a given cavity for impulse and step-frequency-type GPR testing. The unique signal characteristics was also observed at cavity sections. RESULTS : The impulse-type GPR detected the 500-mm length of cavity at a depth of 1.0 m, and the step-frequency-type GPR detected the cavity up to 1.5 m. This indicates that the detection capacity of the step-frequency type is better than the impulse type. The step-frequency GPR testing also can reflect the howling phenomena that can more accurately determine the cavity. CONCLUSIONS :It is found from this study that the step-frequency GPR testing is more suitable for the road cavity detection of asphalt pavement. The use of step-frequency GPR testing shows a distinct image at the cavity occurrences.

• Geophysics and Geophysical Exploration
• /
• v.4 no.2
• /
• pp.45-54
• /
• 2001

A three-dimensional finite difference time-domain modeling algorithm based on staggered grid and considering transmitting and receiving antennas has been developed to simulate Ground Penetrating Radar (GPR) survey. This algorithm adopted the subcellular method to simulate the dipole antennas being used in GPR system and added resistors to reduce ringing caused by the reflections at the ends of an antenna. Comparison of the output voltages in the presence of the resistors for half-space said that the ringing and the amplitude of output voltage decreased as the number of resistors increased, and the antenna was designed based upon this result. Radiation patterns were derived to understand the distribution of electric field energy in the planes including or normal to the antenna. The electric field energy concentrated on vertical direction in the plane including antenna more than in normal plane.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.2
• /
• pp.109-118
• /
• 2022

GPR (Ground Penetrating Radar), developed as a technology for geotechnical investigations such as sinkhole exploration, was used limitedly as a method to resolve undetectable lines in underground facility exploration. To improve the accuracy of underground facility data, the government made it possible to explore underground facilities using a non-metallic pipeline probe from July 2022. However, GPR has a problem in that the exploration rate is lowered in the soil with high moisture content, such as soft soil, such as clay layer, and there is a lot of variation in long-term accuracy. In this study, as a way to improve the accuracy of exploration considering the characteristics of GPR and the environment of underground facilities, we propose a GPR exploration method for underground facilities using permittivity constant correction and pattern analysis of GPR image data. Through this study, the accuracy of underground facility exploration and high reproducibility were derived as a result of field verification applying GPR frequency band and heterogeneous GPR.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.243-244
• /
• 2022

In this paper, experiments were conducted on signal amplification of polymer capsules for application to Ground Penetrating Radar so as to enable real-time monitoring of polymer capsules inside concrete using the Morphology Dependent Resonance phenomenon. A TEM CELL and a vector network analyzer were used to analyze the difference in resonance frequency depending on the material of the sphere and the presence or absence of fracture. In order to manufacture a capsule of a size that can be measured using millimeter waves used in GPR, we manufactured a capsule with a 3D printer and analyzed the effects of the presence or absence of coating and the size of the capsule on the resonance frequency. Resonant frequency or signal amplification is more affected by diameter than coating. The capsule showing the highest amplification is the resin-coated 50 mm diameter capsule with a 316-fold increase and the lowest capsule is the uncoated 10 mm diameter capsule with a signal amplification of 11.9 times. These results demonstrate the potential of GPR to measure the position and state of self-healing capsules, which are small-sized polymers, in real time using millimeter waves.