• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.82-89
• /
• 2003

Near-field ground motions exhibit special characteristics that are different from ordinary far-field ground motions. In this study the shaking table tests were conducted to evaluate the effect of earthquake ground motions with different characteristics on the response of the structure. The ground motions used in this study were the scenario earthquake, design earthquake, and Chi-Chi earthquake measured in TCU052 station. These earthquakes have different frequency contents. The test results show that the frequency content of ground motion is very important to the response of structures. The floor responses of structure were greatly affected by the higher modal frequencies, as well as the fundamental frequency. The responses of third floor were significantly reduced due to the interaction between the structure and the base isolated mass installed at the third floor.

• Earthquakes and Structures
• /
• 제25권1호
• /
• pp.15-26
• /
• 2023

It is of great importance to assess the residual displacement demand in the performance-based seismic design. In this paper, a hybrid deep learning model for predicting the residual displacement spectra under near-fault (NF) ground motions is proposed by combining the long short-term memory network (LSTM) and back-propagation (BP) network. The model is featured by its capacity of predicting the residual displacement spectrum under a given NF ground motion while considering the effects of structural parameters. To construct this model, 315 natural and artificial NF ground motions were employed to compute the residual displacement spectra through elastoplastic time history analysis considering different structural parameters. Based on the resulted dataset with a total of 9,450 samples, the proposed model was finally trained and tested. The results show that the proposed model has a satisfactory accuracy as well as a high efficiency in predicting residual displacement spectra under given NF ground motions while considering the impacts of structural parameters.

• Computational Structural Engineering : An International Journal
• /
• 제1권2호
• /
• pp.139-150
• /
• 2001

An initial approach for the identification of physical causes underlying the spatial coherency of seismic ground motions it presented. The approach relies on the observation that amplitude and phase variability of seismic data recorded over extended areas around the amplitude and phase of a common, coherent component are correlated. It suffices then to examine the physical causes for the amplitude variability in the seismic motions, in order to recognize the causes for the phase variability and, consequently, the spatial coherency. In this study, the effect of randomness in the shear wave velocity at a site on the amplitude variability of the surface motions mi investigated by means of simulations. The amplitude variability of the simulated motions around the amplitude of the common component is contained within envelope functions, the shape of which suggests, on a preliminary basis, the trend of the decay of coherency with frequency.

• Earthquakes and Structures
• /
• 제5권2호
• /
• pp.129-142
• /
• 2013

Linear and nonlinear time history analyses have been becoming more common in seismic analysis and design of structures with advances in computer technology and earthquake engineering. One of the most important issues for such analyses is the selection of appropriate acceleration time histories and matching these histories to a code design acceleration spectrum. In literature, there are three sources of acceleration time histories: artificial records, synthetic records obtained from seismological models and accelerograms recorded in real earthquakes. Because of the increase of the number of strong ground motion database, using and scaling real earthquake records for seismic analysis has been becoming one of the most popular research issues in earthquake engineering. In general, two methods are used for scaling actual earthquake records: scaling in time domain and frequency domain. The objective of this study is twofold: the first is to discuss and summarize basic methodologies and criteria for selecting and scaling ground motion time histories. The second is to analyze scaling results of time domain method according to ASCE 7-05 and Eurocode 8 (1998-1:2004) criteria. Differences between time domain method and frequency domain method are mentioned briefly. The time domain scaling procedure is utilized to scale the available real records obtained from near fault motions and far fault motions to match the proposed elastic design acceleration spectrum given in the Eurocode 8. Why the time domain method is preferred in this study is stated. The best fitted ground motion time histories are selected and these histories are analyzed according to Eurocode 8 (1998-1:2004) and ASCE 7-05 criteria. Also, characteristics of both near fault ground motions and far fault ground motions are presented by the help of figures. Hence, we can compare the effects of near fault ground motions on structures with far fault ground motions' effects.

• 한국지진공학회논문집
• /
• 제10권1호
• /
• pp.17-23
• /
• 2006

지진공학 분야에서는 내진설계를 위한 필요성으로 인해 근역의 강지진동이 관심의 대상이 되어왔으며, 최근 우리나라의 모든 구조물에 내진설계가 의무화되면서 그 필요성은 더욱 부각되고 있는 상황이다. 본 연구에서는 특정부지에서의 강지진동 합성을 위하여 경험적 그린함수 방법을 이용한 합성방법을 적용하였다. 이 합성방법은 Haskell 타입의 운동학적 지진원 모델과 동일한 지역에서 발생한 지진의 유사성 이론을 기본으로 하고 있다. 합성에 이용되는 변수들은 단층길이, 폭 및 변위지속 시간과 같은 단층변수와 모멘트간의 일관된 관계로부터 결정된다. 본 연구에서 적용된 합성방법을 1997년 3월27일 일본의 동일지역에서 차례로 발생한 2개의 중규모(ML 4.7) 및 대규모 지진(ML 6.5)에 대하여 적용하여 강지진동을 합성하고 결과를 분석하였다. 본 연구방법을 적용한 결과 중규모(ML 4.7) 오부터 관측된 강지진동을 이용하여 가속도, 속도 및 변위 성분에서 합성된 강지진동은 파형뿐만 아니라 전체 진동수 대역에서 대체적으로 실제 강지진동을 양호하게 예측하는 경향을 보였다. 또한, 전체적으로 합성운동의 첨두값 역시 실제 계측된 첨두값과 비교할 때 만족스러운 정도로 일치하는 결과를 보여주었다. 특히 가속도이력의 첨두값은 단지 약 8.8%만의 차이를 보여주었다.

• Earthquakes and Structures
• /
• 제2권2호
• /
• pp.171-187
• /
• 2011

Rational scaling of design earthquake ground motions for tall buildings is essential for safer, risk-based design of tall buildings. This paper provides the structural designers with an insight for more rational scaling based on drift and input energy demands. Since a resonant sinusoidal motion can be an approximate critical excitation to elastic and inelastic structures under the constraint of acceleration or velocity power, a resonant sinusoidal motion with variable period and duration is used as an input wave of the near-field and far-field ground motions. This enables one to understand clearly the relation of the intensity normalization index of ground motion (maximum acceleration, maximum velocity, acceleration power, velocity power) with the response performance (peak interstory drift, total input energy). It is proved that, when the maximum ground velocity is adopted as the normalization index, the maximum interstory drift exhibits a stable property irrespective of the number of stories. It is further shown that, when the velocity power is adopted as the normalization index, the total input energy exhibits a stable property irrespective of the number of stories. It is finally concluded that the former property on peak drift can hold for the practical design response spectrum-compatible ground motions.

• Structural Engineering and Mechanics
• /
• 제71권3호
• /
• pp.305-315
• /
• 2019

Extremely long-span transmission tower-line system is an indispensable portion of an electricity transmission system, and its failures or collapse can impact on the entire electricity grid, affect the modern life, and cause great economic losses. It is therefore imperative to investigate the failure and safety of the transmission tower subjected to ground motions. In the present study, a detailed finite element (FE) model of a representative extremely long-span transmission tower-line system is established. A segmental damage indicator (SDI) is proposed to quantitatively assess the damage level of each segment of the transmission tower under earthquakes. Additionally, parametric studies are conducted to investigate the influence of different ground motions and incident angles on the ultimate capacity and weakest segment of the transmission tower. Finally, the collapse fragility curve in terms of the maximum SDI value and PGA is plotted for the exampled transmission tower. The results show that the proposed SDI can quantitatively assess the damage level of the segments, and thus determine the ultimate capacity and weakest segment of the transmission tower. Moreover, the different ground motions and incident angles have a significant influence on the SDI values of the transmission tower, and the collapse fragility curve is utilized to evaluate the collapse resistant capacity of the transmission tower subjected to ground motions.

• 한국지진공학회논문집
• /
• 제15권5호
• /
• pp.25-33
• /
• 2011

비선형 시간이력응답해석에서 입력지진동은 구조물의 탄소성 지진응답을 결정짓는 중요한 요소이다. 시간이력해석에 사용되는 기록지진동파형은 지진발생 메카니즘, 전달경로, 지반의 성질에 따른 여러 가지 인자가 복잡하게 관련되어 있기 때문에 구조물의 지진응답해석에 사용될 일반성을 갖는 입력지진동을 선정하는 것은 매우 어려운 문제이다. 본 논문은 실무에서 내진설계용 지진동으로 가장 선호하지 않는 입력지진동을 선정하여 인공지진동파형을 작성하였다. 인공지진동은 기록지진동과 동일한 위상각을 가지며, 감쇠정수 h=5%일 때의 설계용 스펙트럼과 거의 일치하도록 작성되었다. 기록지지동과 인공지진동을 입력한 1자유도계의 탄성 및 탄소성 지진 응답해석을 수행하여 탄소성 응답스펙트럼 및 입력에너지 응답 특성을 분석하였다. 본 연구에서 작성된 인공지진동은 건축구조물의 탄소성 지진응답해석용 입력지진동으로 충분히 타당성이 있다고 사료된다.

• 한국지진공학회논문집
• /
• 제21권4호
• /
• pp.171-179
• /
• 2017

For estimating the seismic demand of buildings, most seismic design provisions permit conducting linear and nonlinear response history analysis. In order to obtain reliable results from response history analyses, a proper selection of input ground motions is required. In this study, an accurate algorithm for selecting and scaling ground motions is proposed, which satisfies the ASCE 7-10 criteria. In the proposed algorithm, a desired number of ground motions are sequentially scaled and selected from a ground motion library without iterations.

• Earthquakes and Structures
• /
• 제5권6호
• /
• pp.733-751
• /
• 2013

Near field ground motions have caused several structural damages in recent decades. As a result, seismic codes are being updated with related requirements. In this paper a comparative study on the seismic behavior of concentrically braced frames (CBFs) designed based on different seismic codes is performed. Reliability of various frames with different heights and bracing types are analyzed based on the results of "Incremental Dynamic Analysis" (IDA) under near field ground motions. Fragility curves corresponding to IO (Immediate Occupancy) and CP (Collapse Prevention) limit states are extracted based on IDA curves. Results imply that, frames designed based on the near field seismic design criteria of UBC-97 are more reliable under near field ground motions and their failure probability is less comparing to others.