• 한국소음진동공학회논문집
• /
• 제18권3호
• /
• pp.368-374
• /
• 2008

Multi-axial simulation table(MAST) is widely used in motor companies as the multi-axial excitor for vibration fatigue of target component, which provides the vibrational condition as close as the vehicle test. However, the vibration fatigue performance of target component can be guaranteed with MAST system only in case the input profile covers the required severity of the target component on field test. In this paper, the signal processing for multi-axial vibration fatigue test on vehicle component is presented, from the data acquisition of the target component to the derivation of input profile. To compare the severity of vibration condition between field and proving ground, the energy principle of a equivalent damage is proposed and then, it is determined the optimal combination of special events on proving ground using a sequential searching optimal algorithm. To explain the vibration methodology clearly, seat and door component of vehicle are selected as a example.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.32-35
• /
• 2006

The validation of a groundwater source heat pump system installation site is estimated by bydrogeothermic model ing. The hydraulic characteristics of the aquifer system is evaluated from pumping and recovery tests. In addition, the temperature distribution by the pumping and the injection of groundwater, and water level fluctuations are simulated by numerical modeling. The total cooling and heating load for the building is designed as 120RT(refrigeration ton) and the ground water source heat pump system covers 50RT as a subsidiary system The scenario of heat pump operation is organized as pumping and inject ion of groundwater that is performed for 8 hours per day in cooling mode for 90 days during the summer season The heat transfer by the injected warm water is limited near the inject ion wells in the simulated temperature distribution. The reason is that the given operation time is too short to expect broad thermal diffusion in large volume of the aquifer in the simulation time The simulated groundwater level and temperature distribution can be used as important data to develope an energy effective pumping and injection well system. Also it will be very useful to evaluate the hydraulic capacity of a target groundwater reservoir.

• 대한공간정보학회지
• /
• 제12권2호
• /
• pp.67-71
• /
• 2004

위성영상의 종류가 증가하고 취득이 용이해 짐에 따라 위성영상을 이용한 수치고도모형의 생성에 관한 연구가 활발히 진행되어 왔다. SPOT의 경우 $60km{\times}60km$에 해당하는 광범위한 지역에 대한 영상을 취득할 수 있어 넓은 지역에 대한 수치고도모형을 생성 할 수 있는 이점이 있다. 기존의 엄밀센서모형(Rigorous Sensor Model)의 경우 위성의 천문력자료(Ephemeris Data)와 지상기준점을 사용하여 복잡한 과정을 거쳐 DEM을 생성하였으나 본 연구에서는 직접선형변환(DLT)에 기반을 둔 대안적 모형화 기법을 이용하여 DEM을 생성해 보았다. 결과적으로 직접선형 변환의 경우 소수의 기준점을 통하여 양호한 품질의 DEM을 취득할 수 있음을 확인 할 수 있었다.

• 한국추진공학회지
• /
• 제2권1호
• /
• pp.88-94
• /
• 1998

이 연구에서는 100인승 항공기 급의 저익-주익장착나셀(wing mounted nacelle)의 추진기관 장착설계 방법을 제시하였다. 장착설계 방법을 구체적으로 설명하기 위해 세부적인 설계제한조건(design constraint)과 설계요구조건(design requirement and objectives)을 정의하고, 그러한 기준을 근거로 실례의 항공기(K100)를 사용하여 주익장착방식의 장착설계를 수행하였다. 장착설계는 간섭항력(interference drag), roll clearance, ground clearance, nose gear collapse margin, rotor burst, 연료탱크용량 등의 설계제한사항들을 고려하여 엔진성능을 만족시킬 수 있는 최적의 나셀 장착위치(spanwise, FS, WL)와 장착각도(toe-in, incidence, droop angle), wing dry bay의 위치와 크기를 결정하여 향후에 개발될 주익장착방식의 추진기관 장착설계에 활용될 수 있는 설계절차를 구축하였다.

• 영어어문교육
• /
• 제11권4호
• /
• pp.1-20
• /
• 2005

Despite the noteworthy increase in the number of FL anxiety studies, inconsistencies associated with the effects of FL anxiety on language learner performance have been reported in literature. Such conflicting results seem to be attributable in part to unstable conceptualization of the FL anxiety construct and its measure. This paper purported to address the emerging call for a theoretical clarification of the construct at hand as a preface to a clear picture of language anxiety on a conceptual ground. This paper not only covers aspects of general anxiety from psychological perspectives, but examines how FL anxiety and its associated concepts have been conceptualized in the literature. Inconsistent results that pertain to FL learning were also delineated. Given the drawbacks found in the exiting theories of FL anxiety, several points were taken into account for a refinement of the conceptual framework. This attempt will hopefully shed new light on the construct per se and prove conducive to the development of the field of English education.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권7호
• /
• pp.857-862
• /
• 2007

A novel compact ultra wideband(UWB) antenna for UWB application is proposed in this paper. The proposed antenna with $22mm{\times}26mm{\times}1.6mm$ covers the entire UWB bandwidth and has band notch characteristic for the frequency band of $5.15{\sim}5.825GHz$ limited by WLAN. The antenna has a concaved ground plane and staircase shape patch to achieve the wide bandwidth, and has an U shape slot with $\lambda/4$ length to notch the band. The return loss and group delay of the proposed antenna are measured.

• Journal of information and communication convergence engineering
• /
• 제6권2호
• /
• pp.172-176
• /
• 2008

This paper presents a novel feeding structure of the triple-band internal antenna which covers CELLVLAR/DCS/US-PCS bands. The proposed antenna consists of a U-slot patch radiator with a shorting post connected with ground plane and symmetric feeding lines with respective a feeding and shorting posts on both faces of the fixed FR-4 substrate. Through the simulation and experimental results, the proposed antenna is confirmed to have the features of less interference with a human head/body, broad bandwidth, desirable radiation patterns and efficiency for triple-band applications.

• 한국컴퓨터정보학회논문지
• /
• 제22권3호
• /
• pp.89-96
• /
• 2017

Artificial intelligence and robot technology have been received attention as core technologies of the 4th industrial revolution. This paradigm change of science technology raises the importance of unmanned technology field. This paper categorizes unmanned technology as unmanned ground system, unmanned maritime system, and unmanned aircraft system, And it analyzes 557 cases of open patents and classifies each sort of specific technology elements. After then patent information, which were classified by technology, by patent assignees, and by IPC codes, covers unmanned technology maturity, development direction of research and core technology trends. This research provides directions of unmanned technology research and diverse field technology development through cooperation with various perspectives of quantitative analysis of patents.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.442-445
• /
• 2003

The use of a single UWB antenna which covers a wide range of frequencies is very desirable for future wireless communications system. In this paper, we propose a novel wide band printed elliptic monopole antenna for UWB(Ultra wide Band). Wideband planar monopole disc antenna have been recently studied. The proposed antenna can cover UWB frequencies from 3.5GHz to 12GHz. it is determined from 10dB return loss. The antenna consists of the printed elliptical monopole disc with microstrip-line feed. Elliptic disc of antenna and ground height operate important to matching. The results of measurement are almost similar to those of simulation.

• 전기전자학회논문지
• /
• 제15권4호
• /
• pp.339-344
• /
• 2011

In this paper, we proposed an internal multi-band monopole antenna for mobile phone that can be used for smart phones. The proposed antenna has a small volume of $38{\times}8.5{\times}5\;mm^3$, ground size is $100{\times}60\;mm^2$, and covers the GSM900 (Global System for Mobile communications : 880-960 MHz), DCS (Digital Communications System : 1710-1880 MHz), K-PCS (Korea-Personal Communications Service : 1750-1870 MHz), US-PCS (US Personal Communications Service : 1850-1990 MHz), Bluetooth (2400-2483 MHz), Wibro (2300-2390 MHz) and WLAN (Wireless Local Area Network : 2400-2483.5 MHz) bands. The measured peak gains of the implemented antenna are 1.15 dBi at 920 MHz, 3.58 dBi at 1795 MHz, 3.46 dBi at 1810 MHz, 2.91 dBi at 1920 MHz, 5.18 dBi at 2345 MHz, 3.37 dBi at 2442 MHz.