• 제목/요약/키워드: Ground Sampling Distance

검색결과 48건 처리시간 0.031초

In-Orbit Performance Result of KITSAT-3 Earth Imaging System (MEIS)

  • Yoo, Sang-Keun;Kim, Ee-Eul;Chang, Hyon-Sock;Kang, Kyung-In;Choi, Soon-Dal
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.37-42
    • /
    • 1999
  • A compact imaging system, the Multi-spectral Earth Imaging System (MEIS) was developed and operated on an engineering test satellite, KITSAT-3 at the orbital altitude of 720 km. The MEIS takes multi-spectral images of the earth's surface with the swath width of 48 km and the ground sampling distance of 13.8 m in three spectral bands. A brief technical description of the KITSAT-3 MEIS and the result from its initial operation since early June, 1999 are presented. The quality of images produced by the KITSAT-3 MEIS was found comparable to that of images from existing commercial earth observation satellites from its preliminary assessment.

  • PDF

Tolerance Analysis of Compact Imaging Spectrometer (COMIS) for a microsatellite STSAT3

  • Kim, Eun-Sil;Lee, Jun-Ho
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2008년도 한국우주과학회보 제17권2호
    • /
    • pp.27.2-27.2
    • /
    • 2008
  • The STSAT-3 satellite was initiated in October 2006 and will be launched into a lower sun-synchronous earth orbit (~700km) in 2010. COMIS takes hyperspectral images of 30m/60m ground sampling distance over a 30km swath width. The payload will be used for environmental monitoring, such as in-land water quality monitoring of Paldang Lake located next to Seoul, the capital of South Korea. An extensive sensitivity and error budget analysis of COMIS optical system have been performed. As way of estimating aggregate effects of all tolerances, a Monte Carlo simulation is used.

  • PDF

An Analysis of X-Factor, Triple X-Factor, and the Center of Pressure (COP) according to the Feel of the Golf Driver Swing

  • Kim, Yong-Seok;So, Jae-Moo
    • 한국운동역학회지
    • /
    • 제26권3호
    • /
    • pp.265-272
    • /
    • 2016
  • Objective: The aim of this study was to analyze X-factor, triple X-factor, and the center of pressure (COP) according to the feel of golf driver swing. Method: For this research, 9 golfers from the Korea Professional Golfers' Association (age: $30.11{\pm}2.98yrs$, height: $178.00{\pm}8.42cm$, weight: $76.22{\pm}8.42kg$, experience: $10.06{\pm}3.11yrs$) were recruited to participate in the experiment. Twelve Motion Analysis Eagle-4 cameras were installed and an image analysis was conducted by using the NLT (non-linear transformation) method, and 2 units of Kistler type 5233A dynamometer were used to measure ground reaction force. The sampling ratio was set at 1000 Hz. The golfers each took 10 swings by using their own driver, and chose the best and worse feel from among 10 shots. A paired-sample t-test was used to analyze the results. Results: In regard to feel, no change in head speed, X-factor, and the triple X-factor's X-factor stretch, hip rise, and head swivel, was observed (p>.05). Regarding ground reaction force, a difference was observed between the top of the backswing (p<.05) and impact (p<.05) in the vertical force of the left foot. For COP, a difference was also observed between the mid backswing (p<.001), late backswing (p<.001), and top of the backswing (p<.05) for the right foot X-axis and Y-axis mid follow through (p<.01). Conclusion: It can be reasoned that, irrespective of feel, the head speed, X-factor and triple X-factor's X-factor stretch, hip rise and head swivel did not have an effect on drive distance for domestic golfers, and the vertical reaction force of the left foot and left-right movement span's pressure dispersal of the right foot had an increasing effect on drive distance.

The Effect Analysis of Compression Method on KOMPSAT Image Chain

  • Yong, Sang-Soon;Ra, Sung-Woong
    • 대한원격탐사학회지
    • /
    • 제23권5호
    • /
    • pp.431-437
    • /
    • 2007
  • Multi-Spectral Camera(MSC) on the KOMPSAT-2 satellite was developed and launched as a main payload to provide 1m of GSD(Ground Sampling Distance) for one(1) channel panchromatic imaging and 4m of GSD for four(4) channel multi-spectral imaging at 685km altitude covering l5km of swath width. Since the compression on MSC image chain was required to overcome the mismatch between input data rate and output date rate JPEG-like method was selected and analyzed to check the influence on the performance. In normal operation the MSC data is being acquired and transmitted with lossy compression ratio to cover whole image channel and full swath width in real-time. In the other hand the MSC performance have carefully been handled to avoid or minimize any degradation so that it was analyzed and restored in KGS(KOMPSAT Ground Station) during LEOP(Launch and Early Operation Phase). While KOMPSAT-2 had been developed, new compression method based upon wavelet for space application was introduced and available for next satellite. The study on improvement of image chain including new compression method is asked for next KOMPSAT which requires better GSD and larger swath width In this paper, satellite image chain which consists of on-board image chain and on-ground image chain including general MSC description is briefly described. The performance influences on the image chain between two on-board compression methods which are or will be used for KOMPSAT are analyzed. The differences on performance between two methods are compared and the better solution for the performance improvement of image chain on KOMPSAT is suggested.

종분포모형을 이용한 참매의 서식지 예측 -충청북도를 대상으로- (Predicting the Goshawk's habitat area using Species Distribution Modeling: Case Study area Chungcheongbuk-do, South Korea)

  • 조해진;김달호;신만석;강태한;이명우
    • 한국환경생태학회지
    • /
    • 제29권3호
    • /
    • pp.333-343
    • /
    • 2015
  • 본 연구는 국내에서 아직 미흡한 조류 번식지 예측 모형을 이용해 참매의 서식지 예측 및 대체번식지로서 이용 가능한 지역을 선정하고, 향후 참매 번식 가능지역을 대상으로 보호관리 지역을 확대할 수 있는 근거를 제시하기 위한 방안이다. 참매의 번식지는 현장조사에서 확인된 둥지(N=10)를 이용하였으며, 출현지점은 제3차자연환경조사를 통해 확인된 참매출현지점(N=23)을 활용해 분석하였다. 모형변수로는 지형인자 4가지, 자연환경인자(식생) 3가지, 거리인자 7가지, 기후변수 9가지를 활용하였다. 활용변수 중 Random sampling을 통해 확보된 비출현 좌표와 출현좌표간 비모수 검증을 통해 최종 환경변수를 선정하였다. 유의성 검증을 통해 선택된 변수는 번식지 대상 10가지, 출현지점 대상 7가지였으며, 이 변수를 활용해 최종 서식지 예측 모형(MaxEnt)을 구축하였다. 모델 구축결과 번식에 활용된 각 변수별 모형 기여도는 온도의 계절적 변동, 혼효림 과의 거리, 입목밀도, 경급의 순이었으며, 출현지점에 활용된 각 변수별 모형 기여도는 온도의 계절적 변동, 수계와의 거리, 경작지와의 거리, 경사도의 순이었다. 번식지점을 대상으로 한 모델링은 기후환경과 숲 내부에서 번식하는 참매의 특성이 반영된 것으로 판단된다. 예상서식지는 충청북도 중부 이북지역으로 예상되었으며, 그 면적은 $189.5km^2$(2.55%)였다. 충북 이남지역은 청주와 충주 등의 비교적 큰 도시가 발달되어 있는 반면 충청북도 북부지역의 경우 산림과 경작지가 고루 발달되어 있어 번식에 있어 일정한 세력권과 먹이원이 필요한 참매로서는 번식에 유리한 지역일 것으로 판단된다. 출현지점 대상으로 한 모델링은 면적이 $3,071km^2$(41.38%)으로 확인되었으며, 이는 출현지점을 대상으로 하여 단순이동 관찰 및 계절적인 변동 미고려 등의 한계가 있기 때문에 번식지점을 대상으로 한 모델링보다 광범위한 서식예상지역을 예측하였다. 결과에서 확인된 예측지점은 번식지를 대상으로 하였을 경우 정밀한 서식예측이 가능하나, 둥지의 특성상 확인되는 지점이 적고, 참매의 행동영역을 반영하지 못하는 단점이 있다. 반면 출현지점을 대상으로 하였을 경우 더 광범위한 지점에 대한 결과 도출이 가능하였으나, 단순 이동이나 지속적인 이용실태를 반영하지 못하기 때문에 정밀도에서는 다소 떨어진다고 할 수 있다. 다만 이러한 결과들을 통해 참매의 서식지를 예측할 수 있으며, 특히 정밀한 번식지역의 예측자료는 환경영향평가나 개발계획 수립시 서식지 모형 결과를 도입하여 반영할 필요성이 있다.

무인항공기를 이용한 소나무재선충병 선단지 예찰 기법: 세종특별자치시를 중심으로 (Use of Unmanned Aerial Vehicle for Forecasting Pine Wood Nematode in Boundary Area: A Case Study of Sejong Metropolitan Autonomous City)

  • 김명준;방홍석;이준우
    • 한국산림과학회지
    • /
    • 제106권1호
    • /
    • pp.100-109
    • /
    • 2017
  • 본 연구는 세종특별자치시 소나무재선충병(PWN) 피해지의 선단지에 대해서 무인항공기를 이용하여 효율적인 예찰 및 방제사업 지원을 실시하기 위해 수행되었다. 선단지를 중심으로 2016년 2월 15일부터 약 2주간 6개 구역 총 2,284 ha의 면적에 대해 무인항공 촬영을 실시하여 GSD (Ground Sample Distance) 12 cm의 고품질 정사영상 6매를 제작하였다. 정사영상을 바탕으로 1차 피해 의심목 분류를 실시한 결과 총 423본이 분류되었다. 그러나 촬영시기의 계절적 특성, 임상의 다양성 등의 문제로 인해 적중률이 낮아짐에 따라 1차 분류 결과와 스냅사진, 비행정보 등을 활용하여 2차 재분류를 실시하였으며, 이를 통해 피해 의심목 423본 중 231본을 추출하였다. 추출된 231본에 대해 대상지별 주제도를 제작하고 GNSS 등을 이용하여 현장조사를 실시하였으며, 그 결과 총 23본의 피해 의심목을 추출하였다. 현장조사를 통해 추출된 23본에 대해 시료를 채취하여 관련기관에 검증을 의뢰한 결과 23본 모두 소나무재선충병에 감염된 것으로 나타났다. 소나무재선충병 피해목의 분포 특성을 분석한 결과 활엽수림 14본, 침엽수림 4본, 소나무림 3본, 리기다소나무림 2본 등 다양한 임상에서 피해목이 검출된 것으로 나타났다. 무인항공기를 활용하여 항공촬영에서부터 현장조사까지의 과정에 대해 효율성 분석을 실시한 결과 2.3인의 인력으로 6일에 걸쳐 수행한 것으로 분석되었다.

연근해어업 업종별 생산성 추정에 관한 연구 (The estimation of the productivity in adjacent water fisheries)

  • 박철형
    • 수산경영론집
    • /
    • 제45권1호
    • /
    • pp.63-77
    • /
    • 2014
  • This study is to estimate the recent changes in total factor productivity of 15 Korean adjacent water fisheries based on Malmquist productivity indices. The study adopted both input and output oriented productivity measures utilizing a hyperbola distance function. In addition to this point, the study also calculated the 95% confidence interval for the various components of the productivities in order to access the statistical significance of estimates using 2000 times of re-sampling process through the smoothed bootstraping. The results of the study showed us that there was 18% reduction in the overall total factor productivity during the study period from 2007 to 2011, which turned out to be 5% of annual decrease in productivity. The study found that the main reason of this decrease in total productivity is about 22% downward shift of a fisheries production function due to recent conditions of a devastated fishing ground. When we evaluated the statistical significance of changes in technical efficiency combining both pure technical and scale efficiency based on the 95% confidence intervals, we could not find any evidence of changes in those components of total factor productivity. When we accessed the productivity of the each of 15 adjacent water fisheries methods, only the large danish seine fisheries showed us about 7% increase in productivity. Even though the large trawling and the large tow-boat trawling revealed no changes in productivity, all of the other 12 fisheries suffered the decreases in productivities.

만성 폐쇄성 폐질환 환자를 위한 호흡재활 중재가 운동 능력 및 내구성, 일반적 건강상태에 미치는 효과에 대한 메타분석 (Meta-analysis on the Effectiveness of Pulmonary Rehabilitation Program on Exercise Capacity/Tolerance and General Health Status)

  • 오현수
    • 대한간호학회지
    • /
    • 제33권6호
    • /
    • pp.743-752
    • /
    • 2003
  • Purpose: This study was conducted to combine the effects of pulmonary rehabilitation program (PRP) on exercise capacity/tolerance and general health status of COPD patients based on the primary research results examined the effects of PRP, Method: Seventeen studies were selected by the sampling criteria established to include the studies that reported enough statistics necessary to conduct meta-analysis. Result: According to the study results, the most effective indicators for exercise capacity/tolerance were exercise time (such as cycling time or treadmill walking time) and ground walking distance within given time (6 minutes or 12 minutes), whereas effects on such indicators as VE and VO$_2$ were not statistically significant. PRP induced significant effect on patients' general health status, frequently measured by physical, psycho-emotional, and holistic indicators, the enhancement on psycho-emotional dimension resulted from PRP was more prominent than those of the other dimensions. From the results, it was noted that the place where PRP was given and the contents of PRP exercised their influence on the outcome variables. Which body part was trained was also one of the important factors that influence on the patients' perception of dyspnea during exercise as well as on exercise capacity/tolerance. Conclusion: PRP including exercise training significantly improved the exercise capacity and general health status of COPD patients.

Initial On-Orbit Modulation Transfer Function Performance Analysis for Geostationary Ocean Color Imager

  • Oh, Eun-Song;Kim, Sug-Whan;Cho, Seong-Ick;Ryu, Joo-Hyung;Ahn, Yu-Hwan
    • Journal of Astronomy and Space Sciences
    • /
    • 제29권2호
    • /
    • pp.199-208
    • /
    • 2012
  • The world's first geostationary ocean color imager (GOCI) is a three-mirror anastigmat optical system 140 mm in diameter. Designed for 500 m ground sampling distance, this paper deals with on-orbit modulation transfer function (MTF)measurement and analysis for GOCI. First, the knife-edge and point source methods were applied to the 8th band (865 nm) image measured April 5th, 2011. The target details used are the coastlines of the Korean peninsula and of Japan, and an island 400 meters in diameter. The resulting MTFs are 0.35 and 0.34 for the Korean East Coastline and Japanese West Coastline edge targets, respectively, and 0.38 for the island target. The daily and seasonal MTF variations at the Nyquist frequency were also checked, and the result is $0.32{\pm}0.04$ on average. From these results, we confirm that the GOCI on-orbit MTF performance satisfies the design requirements of 0.32 for 865 nm wavelength.

Photogrammetry를 위한 드론 임무비행 영향인자 고찰 (A Study on Factors Influencing Drone Mission Flight for Photogrammetry)

  • 박동순;김태민;소인호
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송∙미디어공학회 2021년도 추계학술대회
    • /
    • pp.9-12
    • /
    • 2021
  • 드론 Photogrammetry는 높은 기술적 활용가치가 있는 기술로서, 결과물로 생성하는 3D 디지털 공간정보 모델이 시설물의 비육안 안전점검 및 진단에 활용될 수 있을 뿐만 아니라 디지털 트윈 구축을 위한 가장 기초적이고 핵심적인 수치 데이터를 제공하기 때문이다. 본 연구에서는 드론 Photogrammetry의 적정 품질을 구현하기 위한 임무비행의 다양한 영향인자에 대해 고찰하였다. K-water연구원 누수탐사실습장을 대상으로 드론 사진 촬영 시 비행고도, 비행속도, 중첩도, 카메라 Pitch각의 영향에 대해 연구를 수행하였다. 본 연구에서 비행시간에 영향을 미치는 인자로서 비행고도, 중첩도, 비행속도의 순으로 중요도가 있음을 알 수 있었다. 드론 임무 비행 시 후처리 결과에 가장 큰 영향을 미치는 인자는 중첩도로 나타났다. 중첩도 60% 임무비행은 3D 모델의 geometry 왜곡이 큰 편으로 나타났다. 비행 고도는 GSD (Ground Sampling Distance)와 직접 연계되므로 중요하며, 낮은 고도일수록 높은 품질의 모델링이 가능하다. April Tag를 통한 지상기준점 자동 패턴 인식 기능은 후처리 과정에서 시간 절약이 가능하여 유용하였다. 비행속도에 의한 결과물의 품질은 큰 차이가 없었으나, 수직 구조물의 모서리 부분에 다소 차이가 있었다. 짐벌 Pitch각도에 의한 정사영상 품질의 차이는 크지 않았으나 수직구조물과 평면적 구조물에 따라 각기 다른 촬영각도를 적용하는 것이 바람직하다. 본 연구성과는 향후 보다 다양한 환경에서의 데이터 수집을 통해 최적 디지털 현실 모델링에 기여할 것으로 판단된다.

  • PDF