• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.631-634
• /
• 2006

Three main important sources for establishing GIS are the orthomap in scale 1:5 000 with Ground Sampling Distance of 0,5m; DEM/DTM data with height error of ${\pm}$1,0m and topographic map in scale 1: 10 000. The new era with Very High Resolution Satellite (VHRS) images as IKONOS, QuickBird, EROS, OrbView and other ones having Ground Sampling Distance (GSD) even lower than 1m has been in potential for producing orthomap in large scale 1:5 000, to update existing maps, to compile general-purpose or thematic maps and for GIS. The accuracy of orthomap generated from VHRS image affects strongly on GIS reliability. Nevertheless, orthomap accuracy taken from VHRS image is at first dependent on chosen sensor geometrical models. This paper presents, at fist, theoretical basic of the Rational Polynomial Coefficient (RPC) model installed in the commercial ImageStation Systems, realized for orthorectifying VHRS images. The RPC model of VHRS image is a replacement camera mode that represents the indirect relation between terrain and its image acquired on the flight orbit. At the end of this paper the practical accuracies of IKONOS and QuickBird image orthorectified by RPC model on Canadian PCI Geomatica System have been presented. They are important indication for practical application of producing digital orthomaps.

• 전자공학회논문지CI
• /
• 제48권6호
• /
• pp.114-122
• /
• 2011

본 논문에서는 무인 지상 차량의 (Unmanned Ground Vehicle, UGV)의 위치 추정을 위한 컴퓨터 비전 기술을 제안한다. 제안하는 방법은 연속적으로 획득되는 360도 거리 정보(range data)와 디지털 수치모델(Digital Surface Model, 이하 DSM)의 3차원 등록(3-D registration) 방법에 기반하고 있다. 많은 수의 3차원 점군(point clouds) 정보를 가지고 있는 거리 정보의 연속적 3차원 등록은 상당한 수행 시간을 필요로 한다. 실시간 위치 추정을 위해 우리는 투영 기반의 등록 방법과 Uniform Arc Length Sampling(이하 UALS) 방법을 제안한다. UALS는 거리영상에서의 GSD(ground sample distance)를 균일하게 유지하면서 동시에 3차원 샘플 포인트의 수를 줄일 수 있는 장점을 가지고 있다. 또한 투영 기반 등록 기술은 3차원 대응점의 탐색 시간을 감소시킨다. 두 개의 실제 항법 경로를 이용한 실험을 통하여 제안하는 방법의 성능을 검증하였다. 3차원 점군의 다양한 샘플링에 대하여 제안하는 기술의 속도 및 정합 성능을 기존 방법과 비교하였다.

• 환경생물
• /
• 제26권3호
• /
• pp.226-232
• /
• 2008

Sampling of the ground beetles in four 'gotjawal' terrains of Jeju island was conducted from April to October, 2007, using pit-fall trap. Totally 2,887 individuals of 23 species belonged to 4 families were collected. The species diversity index was the highest at Aeweol gotjawal (AW), while it was the lowest in Hangyeong-Andeog gotjawal (HA). Clustering analysis revealed that the insect communities of four gotzawals were grouped in only one cluster. Jocheon-Hamdeog gotjawal (JH) formed a cluster with Gujwa-Sungsan gotjawal (GS) at the lowest chord distance (0.24). At the higher chord distance of 0.50, AW fused the cluster of JH and GS. HA fused with the rest three terrains, forming a single cluster at the highest chord distance of 0.98.

• 대한원격탐사학회지
• /
• 제34권6_1호
• /
• pp.905-923
• /
• 2018

무인기 영상을 활용한 고해상도의 산출물을 생성하기 위해서 영상 분석을 통해 측정되는 영상자체의 선명도 분석이 필요하다. 무인기의 선명도가 명확하지 않는 영상을 현업에서 사용할 경우 무인기를 이용한 정확한 3차원 정보의 획득이나 매핑 등의 작업에 큰 영향을 미칠 수 있다. 영상 선명도를 설명할 수 있는 지표로 식별해상도(Ground Resolved Distance, GRD)가 사용되어 왔다. GRD는 영상에서 식별 가능한 두 물체간의 최소거리로 정의되며 공간적 샘플간격인 GSD(Ground Sampling Distance)와 대비되는 개념으로 사용된다. 본 연구에서는 GRD를 육안판독에 의하지 않고 영상에 촬영된 에지 타겟을 분석하여 추출하고자 한다. 특히 GRD대 GSD의 비율(GRD/GSD), 또는 픽셀단위로 표현된 GRD를 영상의 상대적 선명성을 평가할 수 있는 지표로 사용하고자 한다. 본 논문에서는 회전익을 사용하여 여러 촬영환경에서 고도별로 촬영된 에지타겟의 분석을 통해서 GRD를 산출하였다. GRD/GSD를 사용하여 선명도가 현저히 떨어지는 영상을 판별할 수 있었고 이를 통해서 영상의 선명도 지표로서의 적정성을 확인할 수 있었다.

• Earthquakes and Structures
• /
• 제8권6호
• /
• pp.1463-1480
• /
• 2015

This research aims to develop an empirical model for simulation of time-varying frequency in earthquake ground motion so as to be used easily in engineering applications. Briefly, 10545 recordings of the Next Generation Attenuation (NGA) global database of accelerograms from shallow crustal earthquakes are selected and binned by magnitude, distance and site condition. Then the wavelet spectrum of each acceleration record is calculated by using one-dimensional continuous wavelet transform, and the frequencies corresponding to the maximum values of the wavelet spectrum at a series of sampling time, named predominant frequencies, are extracted to analyze the variation of frequency content of seismic ground motions in time. And the time-variation of the predominant frequencies of 178 magnitude-distance-site bins for different directions are obtained by calculating the mean square root of predominant frequencies within a bin. The exponential trigonometric function is then use to fit the data, which describes the predominant frequency of ground-motion as a function of time with model parameters given in tables for different magnitude, distance, site conditions and direction. Finally, a practical frequency-dependent amplitude envelope function is developed based on the time-varying frequency derived in this paper, which has clear statistical parameters and can emphasize the effect of low-frequency components on later seismic action. The results illustrate that the time-varying predominant frequency can preferably reflect the non-stationarity of the frequency content in earthquake ground motions and that empirical models given in this paper facilitates the simulation of ground motions.

• Journal of Biosystems Engineering
• /
• 제26권4호
• /
• pp.355-362
• /
• 2001

Uniform application of agri-chemicals will improve orchard pest management. An air-blast(orchard) sprayer designed for vineyards has been used: however, few research on the uniformity and coverage of the sprays has been reported. Distributions of spray coverage were measured with artificial targets and analyzed to enhance the efficiency of spray application. A structure was built to place water sensitive papers, sampling spray droplets blasted from the orchard sprayer. The sampling cards were collected from five directions at three distances (2.5, 3.0 and 3.5m) for two fan speeds (2,075 and 3,031 rpm), and analyzed using an image analysis system. The distribution of the coverage percent area did not follow the wind velocity pattern. The coverage by the low fan speed was more uniform and higher than that by the higher fan speed. The coverage percent area decreased with an increase of distance. The distribution of droplet density was similar to that of coverage. However, the coverage contribution by smaller droplets became more significant as the distance increased. The upward blasting distance was limited within 3m, but the limit to the ground level was expanded the distance more than 3.5m because of the concentrated droplets.

• 대한원격탐사학회지
• /
• 제27권5호
• /
• pp.587-599
• /
• 2011

NIIRS(National Imagery Interpretability Rating Scale)는 영상의 판독력을 설명하는 품질 지표로 고해상도 위성영상의 품질을 나타내는데 널리 사용되어 왔다. 이는 MTF(Modulation Transfer Function), SNR(Signal to Noise Ratio), 또는 GSD(Ground Sampling Distance)와는 달리 객관적이고, 직관적으로 영상의 전반적인 품질을 설명할 수 있다는 점에서, 그 활용도가 매우 크다고 할 수 있다. NIIRS는 전문 판독가에 의해 육안으로 직접 측정되거나, 영상의 에지 분석(Edge analysis)을 통해 정확하게 추정할 수 있다. 일반적으로 에지 분석에는 품질 측정을 위해 특별히 제작된 인공의 표적이 사용된다. 이 인공표적의 일례로 특정 크기의 반사율 차이를 가지는 흑백 패턴의 천막 형태가 있으며, 이러한 인공표적은 인공위성의 촬영경로 상에 설치되어 진다. 이 때문에 인공표적을 이용하는 방식은 표적의 설치와 관련하여 많은 비용이 지출될 뿐 아니라, 수시로 수행될 수 없다는 문제점을 가지게 된다. 이에 본 논문에서는 영상에서 쉽게 관측될 수 있는 자연표적들로부터 정확한 NIIRS 추정이 가능한 새로운 방식의 에지 분석법을 제안하였다. 이 방법은 임의의 성질을 가지는 자연표적의 특성을 반영하기 위해 알고리즘의 강인성이 강조되었으며, 다양한 실험들을 통해 성능이 평가되었다. 실험 결과는 제안 알고리즘이 기존 방식의 대안으로서 충분히 활용 가능함을 보여 주었다.

• 한국운동역학회지
• /
• 제24권2호
• /
• pp.151-160
• /
• 2014

The purpose of this study was to investigate the GRF(ground reaction force) parameters according to the shoes's heel heights and ground landing distances during downward stairs on bus. Participants selected as subject were consisted of young and healthy women(n=9, mean age: $21.30{\pm}0.48$ yrs, mean height: $164.00{\pm}3.05cm$, mean body mass: $55.04{\pm}4.41kg$, mean BMI: $20.47{\pm}1.76kg/m^2$, mean foot length: $238.00{\pm}5.37mm$). They were divided into 2-types of shoe's heel heights(0 cm/bare foot, 9 cm) and also were divides into downward stairs with 3 types of landing distance(20 cm, 35 cm, 50 cm). A one force-plate was used to collect the GRF(AMTI, USA) data from the sampling rate of 1000 Hz. The GRF parameters analyzed were consisted of the medial-lateral GRF, anterior-posterior GRF, vertical GRF, loading rate, Center of Pressure(${\Delta}COPx$, ${\Delta}COPy$, COP area) and Dynamic Postural Stability Index(MLSI, APSI, VSI, DPSI) during downward stairs on bus. Medial-lateral GRF and vertical GRF didn't show significant differences statistically according to the shoe's heel heights and landing distance, but 9 cm shoes heel showed higher vertical GRF than that of 0 cm bare foot in landing distance of 50 cm. Also anterior-posterior GRF didn't show significant difference statistically according to the shoe's heel heights, but landing distance of 20 cm showed higher than that of landing distances of 35 cm and 50 cm in anterior-posterior GRF. Loading rate didn't show significant difference statistically according to the landing distance, but 9 cm shoe's heel showed higher than that of 0 cm bare foot during downward stairs. The ${\Delta}COPy$ and COP area didn't show significant differences statistically according to the shoe's heel heights and landing distance, but 0 cm bare foot showed higher than that of 9 cm shoe's heel in ${\Delta}COPx$. Dynamic Postural Stability Index(MLSI, APSI, VSI, DPSI) didn't show significant differences statistically according to the landing distance, but 9 cm shoe's heel showed decreased value than that of 0 cm bare foot in dynamics balance. Considering the above, parameters of GRF showed different characteristics according to the shoe's heel heights and ground landing distances during downward stairs on bus.

• 한국지진공학회논문집
• /
• 제18권1호
• /
• pp.29-36
• /
• 2014

In industrial facilities sites, the conventional method determining the earthquake magnitude (M) using earthquake ground-motion records is generally not applicable due to the poor quality of data. Therefore, a new methodology is proposed for determining the earthquake magnitude in real-time based on the amplitude measures of the ground-motion acceleration mostly from S-wave packets with the higher signal-to-ratios, given the Vs30 of the site. The amplitude measures include the bracketed cumulative parameters and peak ground acceleration (As). The cumulative parameter is either CAV (Cumulative Absolute Velocity) with 100 SPS (sampling per second) or BSPGA (Bracketed Summation of the PGAs) with 1 SPS. The arithmetic equations to determine the earthquake magnitude are derived from the CAV(BSPGA)-As-M relations. For the application to broad ranges of earthquake magnitude and distance, the multiple relations of CAV(BSPGA)-As-M are derived based on worldwide earthquake records and successfully used to determine the earthquake magnitude with a standard deviation of ${\pm}0.6M$.

• 대한원격탐사학회지
• /
• 제33권2호
• /
• pp.159-169
• /
• 2017

위성용 전자광학탑재체는 제한된 소모전력 및 우주방사선과 같은 사용 환경에 의해 설계부터 특별한 요구사항을 가지고 있으며, 획득 영상의 품질은 주로 GSD (Ground Sampled Distance), 신호대잡음비(SNR, Signal to Noise Ratio), MTF (Modulation Transfer Function)에 따라 좌우된다. 영상센서의 출력신호에 포함된 잡음 감소를 통한 신호대잡음비 개선을 위하여, 센서에 추가된 프리픽셀(Pre-pixel) 및 다크픽셀(Dark-pixel)을 사용하여 CDS (Corrective Double Sampling) 방식을 통해 영상센서의 잡음 성분을 포함한 오프셋 신호(Offset Signal)를 제거하는 아날로그 신호처리(ASP, Analog Signal Processor) 방법을 제안한다. 또한 센서 제어시스템에서는 영상의 불균일성 처리를 위해 제어시스템의 출력 포트별 게인(Gain), 오프셋, 및 센서의 화소별 특성을 반영한 다양한 방식에 의한 보정 방법이 적용된다. 본 논문에서는 이상 설명한 여러 가지 잡음 개선방법을 시스템 설계 및 운영에 적용하여 위성탑재용 전자광학카메라의 신호대잡음비 향상 방법을 제안하고, 실험을 통해 검증한다.