• Korean Journal of Materials Research
• /
• v.17 no.5
• /
• pp.239-243
• /
• 2007

The evaluation and comparison have been made for the EMI noise which was included in the signal from the sensors in the acoustic emission testing for the bottom plate of ground tank at full. The EMI signal has been classified into two types. One is the signal with very short AE count, and this signal possibly can be filtered by front end filter setting of the channel count with low level of 4 and high level of $10^8$. The other EMI signal occurred from CH 1, CH 3 and CH 10, and had high and constant duration with high energy and count (maximun duration > $10^5\;{\mu}s$), and has characteristic gradient of accumulation amplitude distribution. This signal should be removed in the AE signal evaluation by filtering, because this may affect to the total gradient.

• Structural Engineering and Mechanics
• /
• v.45 no.2
• /
• pp.233-257
• /
• 2013

Given the yield shear of a single-story inelastic structure with simple eccentricity, the problem of strength distribution among the resisting elements is investigated, with respect to minimize its torsional response during a ground motion. Making the hypothesis that the peak accelerations, of both modes of vibration, are determined from the inelastic acceleration spectrum, and assuming further that a peak response quantity is obtained by an appropriate combination rule (square root of sum of squares-SRSS or complete quadratic combination-CQC), the first aim of this study is to present an interaction relationship between the yield shear and the maximum torque that may be developed in such systems. It is shown that this torque may be developed, with equal probability, in both directions (clockwise and anticlockwise), but as it is not concurrent with the yield shear, a rational design should be based on a combination of the yield shear with a fraction of the peak torque. The second aim is to examine the response of such model structures under characteristic ground motions. These models provide a rather small peak rotation and code provisions that are based on such principles (NBCC-1995, UBC-1994, EAK-2000, NZS-1992) are superiors to EC8 (1993) and to systems with a stiffness proportional strength distribution.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.5
• /
• pp.60-66
• /
• 2019

In this report, the process characteristic(viscosity), mechanical properties, combustion characteristics, ground and flight test results of propellants used for a rocket-assisted projectile are described according to several aluminum contents. As the aluminum content increased, initial viscosity decreased, viscosity build-up accelerated, and combustion rate and pressure exponent decreased. In the ground fire test, the total impulse of the rocket-assisted projectiles containing 10 wt% of aluminum were 5% higher than that of the rocket-assisted projectiles containing 2 wt% and 18 wt% of aluminum. The motor efficiency compared to the theoretical performance was 85.6% with 18 wt% of aluminum, the lowest value among the propellant compositions.

• Journal of Ecology and Environment
• /
• v.45 no.2
• /
• pp.78-87
• /
• 2021

Background: To understand shade and wind effects on seedling traits of common reed (Phragmites australis), we conducted a mesocosm experiment manipulating day length (10 h daytime a day as open canopy conditions or 6 h daytime a day as partially closed canopy conditions) and wind speed (0 m/s as windless conditions or 4 m/s as windy conditions). Results: Most values of functional traits of leaf blades, culms, and biomass production of P. australis were higher under long day length. In particular, we found sole positive effects of long day length in several functional traits such as internode and leaf blade lengths and the values of above-ground dry weight (DW), rhizome DW, and total DW. Wind-induced effects on functional traits were different depending on functional traits. Wind contributed to relatively low values of chlorophyll contents, angles between leaf blades, mean culm height, and maximum culm height. In contrast, wind contributed to relatively high values of culm density and below-ground DW. Conclusions: Although wind appeared to inhibit the vertical growth of P. australis through physiological and morphological changes in leaf blades, it seemed that P. australis might compensate the inhibited vertical growth with increased horizontal growth such as more numerous culms, indicating a highly adaptive characteristic of P. australis in terms of phenotypic plasticity under windy environments.

• Journal of the Daesoon Academy of Sciences
• /
• v.39
• /
• pp.249-274
• /
• 2021

The aim of this article is to investigate the religious medical treatments performed by Kang Jeungsan as recorded in The Canonical Scripture, the main scripture of the Korean new religion, Daesoon Jinrihoe. The unity of mind and body is the core principle underlying Kang Jeungsan's religious medical treatments. He believed treating the mind of his patients was more important and necessary than treating their diseases. As such, he believed the only way to treat critical illness was to keep preserve the mind-body unity of his patients. Massage was a physical therapy often used by Kang Jeungsan. The medicinal materials that he commonly used were the Four-substance Decoction (四物湯 samultang), Minor Bupleurum Decoction (小柴胡湯 soshihotang), quince (木瓜 mokgwa *Pseudocydonia sinensis; not papaya), and rehmannia (生地黃 saengjihwang). Kang Jeungsan's religious medical treatments were characteristic of Daoist healing methods. His Daoist style healing methods included multiple techniques such as treating diseases through correcting Qi, exorcising malevolent entities, transferring diseases to a different host, removing a disease through the changing of clothes, pouring medicine into the ground, combining the usage of talisman and incantations, and treating the common people. Among these techniques, Jeungsan's pouring medicine into the ground was especially innovative.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.9
• /
• pp.47-58
• /
• 2010

This paper presents the injection efficiency of 2.0 shot system which was verified by strength and injection time. In order to perform this study, laboratory model tests and field tests are carried out. The laboratory model tests consist of the test of injection time for verifying the injection ratio, and the tests of homo-gel and sand-gel strengths for estimating the characteristic of strength. It is found that the injection ratio of 1:2 shows the best seepage into the ground. The results of the strengths are also larger than other injection ratio. The large strength will also be expressed by field tests at construction site.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1C
• /
• pp.53-63
• /
• 2010

Since the water retention curve is considered as a major parameter to evaluate the unsaturated ground or soils, overburden pressure and clay content on soils underneath ground surface have not been considered for estimating water retention characteristics. Therefore, a need exists that the effect of overburden pressure and clay content on water retention characteristics was assessed in typical weathered soils found in Korea. Soil-Water Characteristic Curve and the unsaturated hydraulic conductivity were estimated using water retention characteristics under the condition of different overburden pressure, clay content, and de-saturation path. Then, these effects are evaluated with the results of SWCC tests from the laboratory. In addition to that, the unsaturated moisture capacity and diffusivity of each case is discussed.

• Journal of the Korean Society of Costume
• /
• v.58 no.10
• /
• pp.1-20
• /
• 2008

The purpose of this study is to analyze the formative characteristic of modern Tap dance costume according to its origin and kinds. For this purpose, the study explored the review of literature focusing on the historical back ground of Tap dance and investigated into the kinds of modern tap dance and the formative feature of the tap dance costume. Costumes of leading tap dancers in representative performances and movies are analyzed. The results are summarized as follows: The kinds of current tap dance could be categorized as three types of Jazz Tap Dance, Rhythm & Funk Tap Dance, Irish tap Dance as their development origin. The Tap dance widely distributed through the U.S. Hollywood movie, The Jazz Tap Dance costume was composed of magnificent and luxurious design applying the high fashion of the 1930s and 1950s in the male and female costumes. The U.S. Blacks' tap dance, Rhythm & Funk Tap costume had a close relation with resistant blacks' culture, and showing the type of free dressing not bound by previous tap dance dress. The Irish Tap Dance originated from Irish folk dance displayed the tap dance embroidered costume using the Irish traditional pattern. This study systemized the characteristic of the tap dance costume by kind, and explored the dress revealed at the tap dance as a symbolic system to the cultural zone where the dance is made.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.4
• /
• pp.31-40
• /
• 2007

Recently, the scale in the field of reinforced soil retaining wall has been grown up like tiered reinforced soil retaining wall. However, there have been increasing number of collapse accidents and large scale of collapse. The design manual adopted in the construction fields have been inconsistent in tiered reinforced soil retaining wall. Therefore, this study performed finite element analysis on 90 cases and analyzed characteristic behavior of lower wall which was one of the effect factors on the stability of tiered reinforced soil retaining wall. The facing displacement of each walls and the behavior of the whole ground were interpreted by the numerical analysis depending on the lower offset distance by the upper wall as well as the upper offset distance by the surcharge load. The results showed that the behavior of tiered reinforced soil retaining wall was differed by condition of surcharge load and each offset distance was found to be important factor.

• The Korean Journal of Health Service Management
• /
• v.6 no.3
• /
• pp.1-11
• /
• 2012

The purpose of this study is to identify the effects of emergency medical technicians' personal traits and job characteristics on job/social stress, job satisfaction, role conflicts, organizational commitment, and self-efficacy. The study population was emergency medical technicians who is working at the hospitals in Yeungnam province. The 200 questionnaires were administered by using ground mail, e-mail, and personal visits and 156 questionnaires were returned(82.5% response rate). Social stress, job satisfaction and role conflicts were significantly determined by personal traits and job characteristic variables. However, job stress, organizational commitment and self-efficacy was only significantly determined by job characteristic variables. In social stress and role conflicts, the subjects with challenge, sociability, acceptance and prudence traits were tend to be significantly higher scores compared to the stability traits. Additionally, among social stress regression models, adding job characteristics to the personal traits model, $R^2$ was increased up to 19% and adding personal traits to the job characteristics model, $R^2$ was increased up to 14%. In conclusion, the study found that personal traits and job characteristics are important variables in explaining social stress, job satisfaction and role conflicts, that would have important managerial implications for recruiting, hiring and managing either new or current emergency medical technicians efficiently.