• 한국전자파학회논문지
• /
• 제25권7호
• /
• pp.757-766
• /
• 2014

본 논문은 거시적인 접근방법을 이용하여 고출력 전자기파에 대한 피해 비용을 보다 실제적으로 산출하기 위한 방법을 제시하고, 이에 대한 피해액을 계산하였다. 먼저 취약성 분석을 통하여 사회 기반 시설 중 사회적으로 가장 큰 혼란을 야기할 수 있을 것이라고 판단되는 전력망에 집중하여 연구하였으며, 이에 대해 고출력 전자기파에 의한 피해액 계산식은 GDP에 대한 총 에너지 소비를 고려하여 고출력 전자기파 피해 시 발생할 수 있는 피해 손실을 효과적으로 예측하기 위한 방법을 제시하였다. 피해액은 고출력 전자기파의 공격 형태에 따라 피해 범위를 설정하고 계산하였으며, 이러한 피해액 계산을 통하여 고출력 전자기파에 취약한 시설에 대해서는 피해액 산출 후 방호 비용과 비교하여 시설 방호 대책을 수립할 수 있는 기반을 마련할 수 있을 것이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.190-190
• /
• 2011

In South Korea the gross generation and heated effluent of power generation plant was 259 TWh and 4.73 billion tons in 2008. And then the waste heat from power generation was 388 TWh. It shows that the efficiency of thermal power generation plant is about 40%. Therefore to reduce $CO_2$ emission from thermal power generation plant, the energy of this heated effluent must be reused to heat buildings or farm facilities. In South Korea horticultural facilities of about 25% are heated in winter season. Total area of greenhouses which are heated is about 13,000 ha. Total heat amount needed to warm greenhouse of 13,000 ha in winter season is only 3.4% of total waste heat from power generation plant. In this study a heat pump system was designed to reuse the waste heat from power generation. Especially new heat exchanger was developed to recover the thermal energy from waste water and this model considered anti-corrosion against sea water and low cost for economic feasibility. This heat recovery system was installed in mango growing greenhouse around thermal power generation plant in Seogwipo-city, Jeju Special Self-Governing Province. The result of preliminary test shows that the heating cost of about 90% is saved as compared to boiler using tax free light oil as a fuel.

• 환경영향평가
• /
• 제29권4호
• /
• pp.272-285
• /
• 2020

본 연구에서는 3차원 기상 및 대기질 모델의 입출력 자료를 평가하는 데 필요한 통계 검증지표를 선별하고, 선정된 검증지표의 기준치를 조사하여 그 결과를 요약하였다. 여러 국내외 문헌과 최근 논문 검토를 통해 최종 선정된 통계 검증지표는 MB (Mean Bias), ME (Mean Error), MNB (Mean Normalized Bias Error), MNE (Mean Absolute Gross Error), RMSE (Root Mean Square Error), IOA (Index of Agreement), R (Correlation Coefficient), FE (Fractional Error), FB (Fractional Bias)로 총 9가지이며, 국내외 문헌을 통해 그 기준치를 확인하였다. 그 결과, 기상모델의 경우 대부분 MB와 ME가 주요 지표로 사용되어 왔고, 대기질 모델 결과는 NMB와 NME 지표가 주로 사용되었으며, 그 기준치의 차이를 분석하였다. 아울러 이들 통계 검증지표값을 이용하여 모델 예측 결과를 효과적으로 비교하기 위한 표출 도식으로 축구 도식, 테일러 도식, Q-Q (Quantile-Quantile) 도식의 장단점을 분석하였다. 나아가 본 연구 결과를 기반으로 우리나라의 산악지역의 특수성 등이 잘 고려된 통계 검증지표의 기준치 설정 등의 추가연구가 효과적으로 진행될 수 있기를 기대한다.

• 한국해양환경ㆍ에너지학회지
• /
• 제17권2호
• /
• pp.116-121
• /
• 2014

지열수를 온열원으로 사용하고, 해양심층수를 열침으로 사용하는 바이너리(binary) 지열 발전시스템은 기존 지열 발전시스템의 효율을 증대하기 위한 재열과정과 터빈출력을 향상시키기 위한 다단과정을 각각 또는 복합적으로 적용하여 다단재열재생사이클의 성능개선을 검토하였다. 사이클종류는 다단재열사이클(Multi Stage reheater cycle; MS), 다단재열재생사이클(Multi stage reheater regeneration cycle; MSR)이 있다. 작동유체는 R134a, R245fa를 적용하였으며 온열원의 온도가 $65^{\circ}C$, $75^{\circ}C$, $85^{\circ}C$ 열침은 $5^{\circ}C$를 적용하여 기본해석을 수행하였다. 본 논문에서는 온열원변화, 작동유체의 종류, 사이클의 종류에 따른 해양지열발전용 다단재열재생사이클의 출력 및 효율을 높이기 위한 해석을 수행하였다. 이를 열역학적 사이클로 모사하기 위한 상용 프로그램인 Aspen HYSYS(V8.0)를 이용하여 해석을 진행 하였다. 작동유체는 R245fa가 R134a보다 우수한 성능을 보였으며, 온열원의 변화와 각각의 사이클 종류에 따라 적절한 작동유체가 있음을 확인 할 수 있었다. 사이클의 출력 및 효율은 각각 MS사이클과 MSR사이클에서 좋은 성능을 나타냈다.

• 한국수산과학회지
• /
• 제42권5호
• /
• pp.494-502
• /
• 2009

A quantitative model was developed in order to estimate fishery production damage due to anthropogenically induced environmental changes. The model is described in the following equation, $Y_D=\frac{{\phi}_D}{{\phi}_G}[Y_0{\cdot}(t_p-t_0)-\frac{Y_0}{{\phi}_G}(1-e^{-{\phi}_G(t_p-t_0)})]$, where, $Y_D$ is annual amount of fishery production by nuclear power plant. ${\varphi}$ D and ${\varphi}$ G are instantaneous decreasing coefficient of fishery production by nuclear power plant and instantaneous decreasing coefficient of gross fishery production, respectively. $Y_0$ is annual mean fishery production without damages. $t_p$ is the present time, and $t_0$ is the starting time of damages. The model was applied to fishing grounds near a nuclear power plant on the east coast of Korea. Since fishery production damages have become bigger with increasing emission of thermal effluents from generators activities in the power plant, this factor has also been considered as, $\delta_{D_i}=\delta_D\({\sum}\limits_{i=0}^{n}\;W_i/W_T\)$, where, $\delta_{Di}$ is the cumulative damage rate in fishery production from generators, $\delta_D$ is the total cumulative damage rate in fishery production, $W_i$ is the emission amount of thermal effluents by generator i, and n is the number of generators in the nuclear power plant. This model can be used to conduct initial estimates of fishery production damages, before more detailed assessments are undertaken.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.123-132
• /
• 2014

The maritime sector is advancing with dedicated endeavor to reduce greenhouse gas in addressing issues with regards to global warming. Since 01 January 2013, the International Maritime Organization (IMO) regulation mandatory requirement for Energy Efficiency Design Index (EEDI) has been in place and should be satisfied by newly-built ships of more than 400 gross tonnage and the Ship Energy Efficiency Management Plan (SEEMP) for all ships type. Therefore, compliance to this necessitates planning during the design stage whereas verification can be carried-out through an acceptable method during sea trial. The MEPC-approved 2013 guidance, ISO 15016 and ISO 19019 on EEDI serves the purpose for calculation and verification of attained EEDI value. Individual ships EEDI value should be lower than the required value set by these regulations. The key factors for EEDI verification are power and speed assessment and their synchronization. The shaft power can be measured by telemeter system using strain gage during sea trial. However, calibration of shaft power onboard condition is complicated. Hence, it relies only on proficient technology that operates within the permitted ISO allowance. On the other hand, the ship speed can be measured and calibrated by differential ground positioning system (DGPS). An actual test on a newly-built vessel was carried out to assess the correlation of power and speed. The Energy-efficiency Design Index or Operational Indicator Monitoring System (EDiMS) software developed by the Dynamics Laboratory-Mokpo Maritime University (DL-MMU) and Green Marine Equipment RIS Center (GMERC) of Mokpo Maritime University was utilized for this investigation. In addition, the software can continuously monitor air emission and is a useful tool for inventory and ship energy management plan. This paper introduces the synchronization and identification method between shaft power and ship speed for EEDI verification in accordance with the ISO guidance.

• 터널과지하공간
• /
• 제17권1호
• /
• pp.26-31
• /
• 2007

우리나라에는 현재 고리, 월성, 영광 등 11기의 원자력 발전소가 운영되면서 전체 전력생산량의 40% 이상을 담당하고 있으며, 2006년까지는 12기가 추가 건설되어 총 23기의 원자력 발전소가 운영되어 국내 총 전력생산량의 절반 이상을 담당하게 될 예정이다. 하지만 이러한 원자력 발전은 필연적으로 인체에 유해한 각종 방사성 폐기물을 생산하게 되므로 이에 대한 처분기술은 대단히 높은 안전율을 고려하여 확보되어야 한다. 한국 원자력연구소의 기초연구에 의하면 국내 실정상 지하 암반내 심층처분이 가장 유리한 시스템인 것으로 보고되고 있으며, 그 중에서도 심도 500 m 이상의 고심도 지하 암반내에 터널을 뚫고 터널 바닥면에 처분공을 일렬로 굴착하여 이 처분공 내에 canister로 밀봉된 방사성폐기물을 유기하는 KBS-3 처분 시스템을 제안하고 있다. 본 연구에서는 KBS-3 처분 시스템을 고려할 경우, 필연적으로 야기되는 고심도 지하에서의 초기응력성분이 처분 시스템에 미치는 영향을 분석하기 위해 수치해석을 실시하였으며 이와 함께 제반 설계정수 중에서 초기응력값이 어떠한 비중을 차지하는지를 살펴보았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.197.1-197.1
• /
• 2011

2010년 12월에 착수한 인공 지열 저류층 생성기술(EGS)를 이용한 지열발전 pilot plant 프로젝트에서 계획된 5 km 깊이의 doublet 시스템에서 실현 가능한 발전량 목표를 추정하였다. 지하 5 km 에서의 암반 온도는 경북 포항지역의 평균 지온증가율은 $33^{\circ}C$/km로 하였을 때 지표온도를 감안하면 $180^{\circ}C$로 추정된다. 암반과의 열교환을 통해 생산되는 지열수의 온도를 $160^{\circ}C$, 발전 후 주입수의 온도를 $60^{\circ}C$로 생각할 수 있고, 이때 binary 발전의 열효율은 0.11이 가능하다. 최근의 EGS에서 실현 가능한 생산 유량인 40 kg/sec을 가정한다면 총 발전량은 1.848 MW로 계산되며, 지열수 양수 펌프와 binary 발전의 냉각에너지 소요량을 고려하면 순 발전량 1.5 MW가 가능해진다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1246-1247
• /
• 2008

With recent advanced in portable electric devices, wireless sensor, MEMS and bio-Mechanics device, the new typed power supply, not conventional battery but self-powered energy source is needed. Particularly, the system that harvests from their environments are interests for use in self powered devices. For very low powered devices, environmental energy may be enough to use power source. Therefore, in other to made piezoelectric energy harvesting device, PMN-PZT thick film was formed by the screen printing method on the Ag/Pd coated alumina substrate. The layer was 8 layers and slurry where a-terpineol, ethycellulose, ferro B-75001 as Vehicle, PMN-PZT powder used are fabricated by ball mill. The output power quality was be also investigated by changing the load resistance, weight and frequency. The made piezoelectric energy harvesting device was resulted from the conditions of 33$k{\Omega}$, 0.25g, 197Hz respectively. The thick film was prepared at the condition of 2.75Vrms, and its power was 230${\mu} W$ and its thickness was 56${mu}m$. The piezoelectric energy harvesting device output voltage was increased, when the load weight, load resistance was increasing and resonance frequency was diminishing. The other side, resonance frequency was diminished, when the weight was increasing. And output power was continuously it changed by load resistance, output voltage, weight and resonance frequency.

• International Journal of Advanced Culture Technology
• /
• 제4권1호
• /
• pp.1-9
• /
• 2016

The demand for energy in Thailand has been continually increasing as the economic and social country grows. Approximately 60% of Thailand's primary energy is imported, mostly petroleum products. In 2008 Thailand's total energy consumption was 80,971 ktoe and the net price of energy imported was up to 1,161 billion Baht which is equivalent to 12.8% of GDP at the current price. The energy consumption or energy demand has been growing at an annual compounded growth rate of 6.42% and the peak electric power demand and electricity consumption was recorded at 22,568 MW and 148,264 GWh and grew at a rate of 7.0% and 7.5% per annum during the period from 1989 to 2008. The gross agriculture production in 2008 was recorded at 135.4 Mt which represents agriculture residue for energy at 65.73 Mt, which is equivalent to energy potential of about 561.64 PJ or 13,292 ktoe an increase in average of 5.59% and 5.44% per year respectively. The agricultural residues can converted to 15,600 GWh/year or 1,780 MW of power capacity. So, if government sector plan to install small biomass gasification for electricity generation 200 kW for Community. The residue agricultural is available for 8,900 plants nationwide. The small biomass power generation for electricity generation not only to reduce the energy imports, it also makes the job and income for people in rural areas as well. This paper's aim is to report the energy situation in Thailand and has studied 5 main agricultural products with high residue energy potential namely sugarcane, paddy, oil palm, cassava, and maize appropriate for small electricity production. These agricultural products can be found planted in many rural areas throughout Thailand. Finally, discuss the situation, methods and policies which the government uses to promote small private power producers supplying electricity into the grid.