• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.576-577
• /
• 2006

This study was conducted to improve the durability and decrease the friction of the sintered bushing used in the joints of construction equipment. Research was carried out to examine the effects of the groove pattern on the inner surface. The following results were obtained: (1) The bushing (EK Bush) with grooves on the inner diameter showed increased durability as compared to a non-grooved bushing. (2) The helical-grooved bushing showed the least amount of wear; it was １/10 of the wear of the non-grooved bushing. (3) If the distance between grooves was decreased, then the coefficient of friction also decreased.

• Tribology and Lubricants
• /
• 제2권1호
• /
• pp.30-38
• /
• 1986

In the paper, static characteristics of spiral grooved seal is theoretically obtained by Using Navier-Stokes equation. In the analysis, inertia term of fluid is considered and the flow and pressure in the steady state are obtained for the groove direction and vertical to the groove direction. As the journal rotating frequency increases, the leakage flow decreases. Therefore, zero net leakage flow is possible at the region of some rotating frequency.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 춘계학술논문집 2부
• /
• pp.821-823
• /
• 2011

본 논문에서는 초고온/고압의 환경에서 사용되는 메탈 구루부드 가스켓의 품질 및 생산성 향상 그리고 원가절감을 목표로 Gasket제작 전용기계시스템을 개발하여 제작기술혁신을 하고자 하였으며, 전용기계시스템의 구성은 그루부 가공전용기, 벤딩 전용기, 후열처리 전용기, 용접비드 황삭전용기, 용접비드 연삭전용기로 이루어져 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.994-996
• /
• 2002

We present a novel fabrication method for a V-grooved mold of the light guide plat of TFT-LCD with MEMS technology. This method is performed by the inclined UV lithography and Ni electroplating unlike the previous mechanical processing technique. V-grooves with different dimension can be made simultaneously with single photomask.

• Tribology and Lubricants
• /
• 제8권2호
• /
• pp.44-49
• /
• 1992

Hydrodynamic lateral forces acting on circumferentially grooved and tapered pistons in hydraulic piston pumps are analyzed for the case where the axis of piston and cylinder are tilted with each other. The effects of grooves and tilting on lateral force and leakage flowrate are discussed from the analytical solution of one-dimensional Reynolds equation. The analytical solution is in accordance with the numerical solution of two-dimensional Reynolds equation as the number of grooves increases.

• Tribology and Lubricants
• /
• 제10권1호
• /
• pp.27-34
• /
• 1994

An analysis based on the narrow groove theory is not suitable for the case of insufficient number of grooves or of non-rectangular shaped grooves. In this study, we present the solution of the compressible Reynolds equation for the air-lubricated hydrodynamic herringbonegrooved journal bearing with circular shaped grooves. From the results calculated numerically, optimal design values are obtained for the herringbone-grooved journal bearing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.774-777
• /
• 2005

In this work, a soft embossing method is proposed to fabricate microgrooves on polyimide surfaces. Apply these resulting patterned micro-grooved polyimide surfaces as the liquid crystal alignment layers. The director of liquid crystal molecules aligns perfectly along the direction of microgrooves.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.257-262
• /
• 2001

A numerical analysis is undertaken to show tile influence of bearing design parameters on tile load capacity of air lubricated spiral grooved thrust bearing. The governing equation derived from the mass balance is solved by the finite difference method. Optimal values for various design parameters are obtained to maximize the load capacity. The design parameters are the groove angle, the groove width ratio, the groove height ratio, arid the seal ratio.

• 한국가스학회지
• /
• 제17권1호
• /
• pp.73-80
• /
• 2013

본 연구에서는 유한요소해석법을 사용하여 V홈 오링의 밀봉거동과 내구 안전성에 관련된 변형률, 응력, 접촉법선응력 해석결과를 제시하고 있다. 밀봉거동과 내구 안전성에 관한 FEM 해석결과에 의하면, V홈 형상을 갖는 오링에 작용하는 최대변형률, 최대압축응력, 최대접촉법선응력은 기존의 오링에 비해 약 1.2배나 더 높게 나타났다. 이것은 오링이 두 개의 원형을 겹치도록 형성된 중간부에 V홈을 넣었기 때문에 가능한 것으로 판단되고, V홈 오링은 볼밸브, 압력용기, 가스기기의 밀봉을 하는데 매우 유용한 것으로 알려져 있다. 그리고, V홈 오링에서 가스압력을 높여도 압출에 의한 파손현상이 발생되지 않았는데, 이것은 V홈이 형성되어 있기 때문이다. 따라서, V홈 오링은 기존 오링에 비해 밀봉수명을 연장시킬 수 있다.

• 대한전자공학회논문지SD
• /
• 제37권11호
• /
• pp.50-58
• /
• 2000

Goodved $SiO_2$ 박막을 갖는 Mach-Zehnder(M-Z)형태의 $Ti:LiNbO_3$ 진행파 광변조기의 전극구조를 변화시켜가며 유한요소법에 의한 해석을 수행하였다. 최적의 설계치를 추출하였으며, 제작된 전극에 대하여 특성임피던스($Z_o$), 마이크로파 유효굴절률($N_{eff}$), 감쇠정수($a_o$)를 측정하여 그 결과를 이론치와 비교하였다. 전극두께가 11${\mu}m$이고, $SiO_2$ 완중박막을 식각한 전극에 대하여, RF 측정결과로부터 계산된 3dB 변조대역폭은 18GHz로 나타났다.