• Tribology and Lubricants
• /
• 제33권2호
• /
• pp.71-78
• /
• 2017

The drag torque in the wet clutch system of a dual clutch transmission system is investigated because it is relatively high, up to 10 of the total output torque of the engine, even when the clutch is in the disengagement state with zero torque transfer. Drag torque results from the shear resistance of the DCTF between the friction pad and separator plate. To reduce the drag torque for ensuring fuel economy, the groove pattern of the wet clutch friction pad is designed to have a high flow rate through the pattern groove. In this study, four types of groove patterns on the friction pad are designed. The volume fraction of the DCTF (VOF) and hydrodynamic pressure developments in the gap between the friction pad and separator plate are computed to correlate with the computation of the drag torque. From the computational results, it is found that a high VOF and hydrodynamics increase the drag torque resulting from the shear resistance of the DCTF. Therefore, a patterned groove design should be used for increasing the flow rate to have more air parts in the gap to reduce the drag torque. In this study, ANSYS FLUENT is used to solve the flow analysis.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.445-446
• /
• 2002

The purpose of this study was to investigate the effect of micro holes, pattern structure and elastic modulus of pads on the polishing behavior such as the removal rate and WIWNU (within wafer non-uniformity) during CMP. The regular holes on the pad act as the superior abrasive particle's reservoir and regular distributor at the bulk pad, respectively. The superior CMP performance was observed at the laser processed bulk pad with holes. Also, th ε groove pattern shape was very important for the effective polishing. Wave grooved pad showed higher removal rates than K-grooved pad. The removal rate was linearly increased as the top pad's elastic modulus increased.

• International Journal of Oral Biology
• /
• 제38권4호
• /
• pp.161-167
• /
• 2013

Human dental pulp stem cells (DPSCs) are multi-potent mesenchymal stem cells that have several differentiation potentials. An understanding of thetissues that differentiate from these cells can provide insights for future regenerative therapeutics and tissue engineering strategies. The mesiodens is the most frequent form of supernumerary tooth from which DPSCs can differentiate into several lineages similar to cells from normal deciduous teeth. Recently, it has been shown that nanoscale structures can affect stem cell differentiation. In our presentstudy, we investigated the effects of a 250-nm nanoscale ridge/groove pattern array on the osteogenic and adipogenic differentiation of dental pulp cells from mesiodenscontaining human DPSCs. To this end, the expression of lineage specific markers after differentiation induction was analyzed by lineage specific staining and RT-PCR. The nanoscale pattern arrayed surface showed apositive effect on the adipogenic differentiation of DPSCs. There was no difference between nanoscale pattern arrayed surface and conventional surface groups onosteogenic differentiation. In conclusion, the nanoscale ridge/groove pattern arrayed surface can be used to enhance the adipogenic differentiation of DPSCs derived from mesiodens. This finding provides an improved understanding of the effects of topography on cell differentiation as well as the potential use of supernumerary tooth in regenerative dental medicine.

• 한국광학회지
• /
• 제21권6호
• /
• pp.247-253
• /
• 2010

본 논문에서는 에지 방식의 BLU(Backlight unit)에 사용되는 도광판의 구조를 최적화하여 광학시트를 줄이면서 휘도와 균일도 및 시야각을 유지하기 위한 이중구조의 도광판을 설계하고 시뮬레이션을 통해 휘도와 균일도를 알아보았다. 여기에 사용된 복합 도광판은 이중구조의 도광판으로 상부에는 곡률 R을 갖는 프리즘패턴을 형성하고 곡률 R에 따른 휘도와 균일도를 시뮬레이션하였다. 하부에는 V groove 패턴을 회전시켜 상부패턴과 $90^{\circ}$를 이루게 하여 균일도를 확보하였다. 특히, 하부 패턴에서는 외곽의 피치 간격과 중심의 피치간격의 비(최대:최소), 패턴의 개수와 패턴의 분산을 정의할 수 있는 프로그램을 설계하여 V groove 사이의 간격을 결정하였다. 복합 도광판(dual-layer light guide plate, DLGP)의 최적화를 위해 다시 하부 패턴의 개수를 변화시켜 균일도를 알아보았다. 시뮬레이션 결과 복합 도광판을 이용한 BLU는 균일도 90.6%, 시야각 $145^{\circ}$인 특성을 갖는 것을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.725-726
• /
• 2008

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.432-437
• /
• 2001

It is necessary to improve mechanical and optical porperties in the optical disk substrates as the information storage devices with high storage density using blue laser are being developed. Injection compression molding is regarded as the most suitable process to manufacture optical disk substrates for quality recording and read-out. In the present research, the effects of processing conditions and the insulation layer thickness on gapwise birefringence and the land-groove pattern were investigated. It was found that the values of the birefringence distribution were very sensitive to mold temperature history, and the level of birefringence reduced and, furthermore, the quality of replication was improved due to the insulation layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.880-882
• /
• 2002

We have proposed a novel optical design technique of light-guide plates(LGPs) which can able to improve the optical efficiency of transflective LCDs. The basic concepts of our design technique are that we make the groove-pattern of LGP pixels resemble the pixel-array-pattern of transflective LCDs in shape and size and make the surface of the groove scatter (front scattering). In simulated and measured results, we ensure that our design of LGP in backlight unit for transflective LCDs can improve the optical efficiency of LCDs.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.576-577
• /
• 2006

This study was conducted to improve the durability and decrease the friction of the sintered bushing used in the joints of construction equipment. Research was carried out to examine the effects of the groove pattern on the inner surface. The following results were obtained: (1) The bushing (EK Bush) with grooves on the inner diameter showed increased durability as compared to a non-grooved bushing. (2) The helical-grooved bushing showed the least amount of wear; it was １/10 of the wear of the non-grooved bushing. (3) If the distance between grooves was decreased, then the coefficient of friction also decreased.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 하계학술발표회
• /
• pp.90-91
• /
• 2004

• 한국진공학회지
• /
• 제11권4호
• /
• pp.249-255
• /
• 2002

이방성 습식 식각기술을 이용하여 멤버레인을 제작하기 위하여 KOH 용액 및 KOH-IPA 혼합용액을 사용하여 단결정 실리콘 기판을 식각하였다. 단결정 실리콘의 식각속도는 식각 용액의 온도와 농도에 좌우되었으며, 식각 용액의 농도에 따라 식각 형태와 패턴 형성 방향이 달라짐도 관찰되었다. 식각을 위한 표면패턴은 실리콘웨이퍼의 primary flat에 $45^{\circ}$로 기울여 형성되었으며 KOH의 농도가 20 wt%로 유지되었을 때, 식각 용액의 온도 $80^{\circ}C$ 이상에서는 U-groove, $80^{\circ}C$ 이하의 온도에서는 V-groove 식각 형태가 형성되었다. 각 면에 대한 식각속도 차이에 의해서 생기는 hillock은 온도와 농도가 높아짐에 따라 현저하게 줄어들었다.