• The Journal of Internal Korean Medicine
• /
• v.16 no.2
• /
• pp.146-177
• /
• 1995

The purpose of this study was to investigate the relationship between the teeth and Zhang-Fu(臟腑), dental diseases, and the hygiene of the mouth through the literature of oriental medicine. First, the relatonship between the teeth and Zhang-Fu is reviewed as follows: The teeth are influenced by Shen(腎) because they are the end of bone and Biao(標) of Shen. Gingiva is related to Wei(胃) and Da-Chang(大腸) because it is passed by Yangming-Channel(陽明經). The growth and nutrition of teeth depends on Shen. The pathological condition of Shen causes the gingival atrophy, the loose of teeth, dedentition due to aging, withering of teeth, and tartar: whereas the pathological condition of Wei and Da-Chang causes toothache, gingivitis, inflamed gums, bad breath, and gingival hemorrhage. Second, the causes and therapies of dental diseases through the literature can be summarized as follows: The major causes of toothache are the pathogenic condition of wind-heat and wind-cold, the heat syndrome of Wei, the damp-heat of intestine, flaring-up of fire of deficiency type, rotten tooth, etc... The principal causes of dedentition and the shaking and loose of teeth are the deficiency of Shen, and the rest of causes are the damp-heat of Yangming. Gingival atrophy is caused by the deficiency of Shen, whereas the gingival hemorrhage comes from the factors in the pathogenic factor of wind-heat of Yangming-Channel, the heat syndrome of stomach, and the deficiency of Shen. The causes of grinding of teeth during sleeping are stomach-heat, and the delayed dentition and the withering result from the deficiency of Shen-Jing.(腎精) The principal therapies of toothache are removing wind and heat, clearing away heat and prompting diuresis, clearing away the stomach-heat, replenishing vital essence to tonify the Shen, relieving superficial syndrome by wind-cold, and alleviating pain by destroying parasites. For the prescription of the principal therapies, there are Xijio Dihuang Tang, Jiajian Ganlu Yin, Qufeng Wan, Qingwei San, Tiaowei Chenggi Tang Shengong Wan, Liangge San Qingwei Tang Yunu Jian, Liuwei Dihuang Wan Zuogui Yin Bawei Wan Wanshao Dan, Xixin San Badou Wan Gianghuo Fuzi Tang, Jiuzi Tang Badou Wan, etc... The therapies of dedentition and the shaking and loose of teeth are replenishing vital essence to tonify the Shen, and warming and recuperating the Shen-Yang: as the prescription, there are Liuwei Dihuang Wana Zuogui Yin, and Bawei Wan Anshen Wan Wanshao Dan Yougui Wan etc... The therapies of gingival hemorrhage are clearing away the stomach-heat, replenishing vital essence to tonify the Shen, warming and recuperating the Shen-Yang(腎陽), and moisturing and purging intence heat with the prescription of Tiaowei Chenggi Tang Xijiao Dihuang Tang, Liuwei Dihuang Wan Zuogui Yin, Bawei Wan Anshen Wan, and Yunu Jian. The therapy of gingival atrophy is replenishing vital essence to tonify the Shen in the prescription of Liuwei Wan Bawei Wan Ziyin Dabu Wan. The therapies of grinding of teeth during sleeping are clearing away the stomach-heat and purging intense heat, and invigorating the spleen through eliminating dampness in the prescription of Qingwei San, Wumei Wan, etc... The therapy of delaed dentition is replenishing vital essence to tonify the Shen with the prescription of Liuwei Wan Buyin Jian, etc... Third, clinical treatment reports of dental diseases are reviewed as follows: The toothache due to stomach-heat was treated by medical herbs like Gypsum, Natrir Sulfas, Rehmanniae, Schizonepetal Herba, Menthae Folium, Cimicifugae Rhizoma, and Scrophulariae Radix. The therapies of toothache due to flaring-up of fire in deficiency type from deficiency of Shen provided with replenishment of vital essence to tonify the Shen and clean ministerial fire, and the prescription was the kind of Liuwei Wan, which worked very well. The therapy of dedentition and loose of teeth due to deficiency of Shen was done to stablize the teeth as tonifing the Shen with the prescription of Guchi Wan. The rate of imrovement was over 90%. The destruction of periodontal tissue due to periodonititis was cured of dispelling wind, reducing heat, and alleviating pain, It was improved by taking Zizhi Xingiong Tang, Guchi Xiaotong San, Yunii Jian, and Qingwei San about 3-7 days, and the rate of improvement was over 80%. Fourth, the prevention and regimens are reviewed as follows: As a physical and breathing exercise of the teeth, tapping teeth which stimulates the circulation of Qi(氣) and Xue(血) had been used. The tapping time of 14, 17, 36, etc... has been reported, and it should be applied based on the body condition. The medical herbs for gargling and brushing teeth have been used. Specifically, Cimicifugae Rhizoma, Gypsum, Gypsum Fibrosum, and Indigo pulrelrata Lereis have been used to reduce heat, Coptidis Rhizama and Yang Jinggu to eliminate damp-heat, Amomi Semen, Cyperi Rhizoma, Flos Caryophylli, Asari Radix, Piperis Longi Fructus, Santali Albae Lignum, Meliae Fructus, Moschus, Aquillaiae Lignum, and Borneol to promote the circulation of Qi and to relieve pain, Ligustici Radix, Angelice Radix, Rhizoma Nardostachydis, Tribuli Semen to relieve superficial syndrome by means of diaphiresis, and Cnidii Rhizoma, Angelicae sinensis Radix, and Olibanum to promote blood circulation to stop pain.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.29-35
• /
• 2012

Purpose: The purpose of this study was to analyze temperature change along the implant-bone interface induced by grinding the occlusal surface of implant gold prosthesis and to compare the temperature generated by grinding of prosthesis with different cooling methods. Materials and methods: The experimental gold prostheses were fabricated with dental gold alloy and castable abutment. The prostheses had 3 cylindrical protrusions on the occlusal surface with 1mm in height. Temperature was measured using 16 thermocouple wires attached to the implant fixture surface and the fixture was embedded in an acrylic resin block inside the $37^{\circ}C$ water bath. Cylinders were grinded for a period of 30 second with a low-speed handpiece with green stone point. One cylindrical protrusion was grinded without cooling, the second one was grinded with air blow, and the third one was grinded with water-spray. Results: The mean maximum temperature was measured more than $47^{\circ}C$ of the implant and the maximum temperature was measured at the cervical portion of the implant in the group without cooling. There was statistically significant difference between the group without cooling and the groups with cooling (P<.05). However, there was no significant difference at all portion of implant in the groups with cooling (P>.05). Conclusion: The results of this study support that the grinding of implant gold prosthesis without cooling may damage the peri-implant tissue. The continuous use of air blow and water-spray adjacent to prosthesis during the grinding of implant gold prosthesis may prove to be beneficial for cooling of the implant.

• Journal of the Korean Society for Heat Treatment
• /
• v.2 no.2
• /
• pp.33-37
• /
• 1989

In order to improve hardness uniformity of standard-hardness blocks. experimental procedure was designed using Taguchi Method. For this purpose the following factors were studied: austenitizing temperature, tempering condition, grinding condition, subzero treatment, lapping time, $15{\mu}m$ polishing time, final polishing time. These factors were processed and then ten hardness values were measured on each specimen. SN (signal to noise) ratio for each condition was calculated with standard variations of these values. Finally, from the calculated value of ANOVA on SN ratios, the lapping time was found to be the main factor Better uniformity with longer lapping time implies that residual stress that was formed after quenching is a dominent parameter that affects on the uniformity of hardness. Therefore, step-quenching method was adapted to minimize the residual stress. By this modification of quenching procedure, the hardness uniformity was improved remarkably and the yield ratio was increased from 55% to 88%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.453-458
• /
• 2011

We study the effect of mechanical machining and heat treatment on the surface residual stress of TP 316L stainless steel. Electrical discharge machining (EDM), milling and grinding were applied to TP 316L plate specimens. The residual stress and hardness were measured and the effect of heat treatment on the surface residual stress was examined. The residual stress was measured by the X-ray diffraction method, which showed that the surface residual stress was related only to the stress magnitude and was independent of the compressive or tensile component. The surface residual stress was greatly decreased by the heat treatment, but it was not removed completely.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1319-1321
• /
• 1997

The effect of cooking peanut kernels before grinding on the hexanal content of peanut milk was investigated. Hexanal which is thought to be one of the major compounds contributing to the beany flavor of peanut milk, was quantified using a simplified headspace gas chromatographic method. Four cooking times (0, 10, 20 and 30 min) were evaluated. The concentration of hexanal in peanut milk was one-third by cooking peanut kernels for 10 min or longer. Protein content of peanut milk gradually decreased by heat treatments.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.206-208
• /
• 2002

Metalworking fluids (MWFs) are fluids used during machining and grinding to prolong the life of the tool , carry away debris, and protect the surfaces of work pieces. These fluids reduce friction between the cutting tool and the work surface, reduce wear and galling, Protect surface characteristics, reduce surface adhesion or welding and carry away generated heat. Workers can be exposed to MWFs by inhaling aerosols (mists) and by skin contact with the fluid. Skin contact occurs by dipping the hands into the fluid, splashes, or handling workpieces coated with the fluids. The amount of mist generated (and the result ins level of exposure) depends on many factors. To reduce the potential health risks associated with occupational exposures to MWFs, it is required to establish optimum MWFs supply method and condition with minimum Quantity in all over the mechanical machining field including high speed type heavy cult ing process.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.3
• /
• pp.68-74
• /
• 2003

Any one of the high precision spindle systems and guide way systems, the high stiffness of structure, the error compensation during assembly, high accuracy control system is inevitable technology for development of high precision machine tools. Especially, among these, design of spindle system is one of the most important technologies leading high precision of machine tool and high quality of manufactured products. A high speed and high precision spindle system, which will be used for final machining of ferrule, is designed considering the effect of heat cutting torque, cutting fore, and work-piece materials. The detailed design and analysis process are presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.37-41
• /
• 1993

ball screw is a critical machine component which dictates the precison of a given machine tool. The conventional manufacturing method requires the heat treated ball screw to be ground to its final dimensions. This study looks into the the feasibility of replacing the grinding process with a simpler process, namely threading on NC lathe. The purpose is to reduce the capital investment as well as production time in the manufacture of ball screws. Ceramics and CBN cutting tools are compared with respect to their ability to machine hardened steel. It is shown that CBN tools can be successfully utilized to machine precision ball screws with superior suface qualities.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.977-980
• /
• 2004

Metalworking fluids (MWFs) are fluids used during machining and grinding to prolong the life of the tool, carry away debris, and protect the surfaces of work pieces. These fluids reduce friction between the cutting tool and the work surface, reduce wear and galling, protect surface characteristics, reduce surface adhesion or welding and carry away generated heat. Workers can be exposed to MWFs by inhaling aerosols (mists) and by skin contact with the fluid. Skin contact occurs by dipping the hands into the fluid, splashes, or handling workpieces coated with the fluids. The amount of mist generated (and the resulting level of exposure) depends on many factors. To reduce the environmental pollution wastes and the potential health risks associated with occupational exposures to MWFs, it is required to establish optimum MWFs supply method and condition with minimum quantity in all over the mechanical machining field including high-speed type heavy cutting process.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.78-84
• /
• 2005

The development of eco-friendly low pressure carburizing system with high pressure gas quenching (LPC_GQ, 500kg/charge) led to new stage in the fundamental case-hardening treatments. This is due to its ability to provide tighter tolerances on the carburizing process with notable reductions in distortion of the carburized and hardened workpiece. This system is characteristics by high uniformity and reproducibility of heat treatment results, absence of an intergranular oxidation layer, carburizing of complex shapes, reduced cycle time, low operating costs, simplified production, eliminate post washing, and reduced grinding costs.