• 전기학회논문지
• /
• 제56권2호
• /
• pp.317-324
• /
• 2007

Most conventional hybrid systems using renewable energy sources have been applied for stand-alone operation, but Utility-interface may be an useful and viable option for hybrid systems. Grid-connected operation may have benefits such as reduced losses in power system distribution, utility support in demand side management, and peak load shaving. This paper addresses power control and dynamic performance of a grid-connected PV/wind/BESS hybrid system. At all times the PV way and the wind turbine are individually controlled to generate the maximum energy from given weather conditions. The battery energy storage system (BESS) charges or discharges the battery depending on energy gap between grid invertger generation and production from the PV and wind system. The BESS should be also controlled without too frequently repeated shifts in operation mode, charging or discharging. The grid inverter regulates the generated power injection into the grid. Different control schemes of the grid inverter are presented for different operation modes, which include normal operation, power dispatching, and power smoothing. Simulation results demonstrate that the effectiveness of the proposed power control schemes for the grid-interactive hybrid system.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.312-319
• /
• 2014

When distributed generation such as a wind power system is connected to the grid, it should meet grid requirements like IEEE Std. 1547, which regulates the anti-islanding method. Since the islanding may cause damage on electrical equipments or safety hazards for utility line worker, a distributed generation should detect it as soon as possible. This paper proposes a hybrid anti-islanding method coupled with the active and passive detection methods. To enhance the harmonic extraction capability for an active harmonic injection method, cascaded second-order band-pass filter and signal processing scheme are employed. Simulation and experiments are carried out under the islanding test condition specified in IEEE Std. 1547. Passive over/under voltage and over/under frequency methods are combined with the active method to improve the detection speed under certain condition. The simulation and experimental results are presented to verify that the proposed hybrid anti-islanding method can effectively detect the islanding.

• 조명전기설비학회논문지
• /
• 제27권11호
• /
• pp.27-36
• /
• 2013

Islanding in a gird connected inverter of wind power generation system may influence a bad effect on equipments or yield safety hazards on grid so it should be detected rapidly and exactly. A passive method to detect islanding is comparatively simpler than an active method but suffers from non detection zone (NDZ). On the other hand, the active method can significantly reduce NDZ by injecting a disturbance into inverter output. To improve the reliability of islanding detection, this paper proposes a hybrid anti-islanding detection method combining the conventional passive method as well as the active method based on novel harmonic injection method using fourier transform. The proposed scheme is fast to detect islanding when NDZ does not exist because it has the nature of passive method. Under NDZ, the active method can detect occurrence of islanding reliably. The effectiveness and validity of the proposed scheme is proved through comparative simulations.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제10권2호
• /
• pp.189-198
• /
• 2004

디스플레이 디바이스가 발전함에 따라 컴퓨터를 이용한 작업 환경이 응용 목적에 보다 적합한 형태로 변환하고 있다. 본 논문에서는 테이블 형태의 프로젝션 시스템인 가상테이블을 이용하여 건축 디자인 시스템의 개발에 관하여 고찰한다. 개발된 시스템은 인터랙티브 VR 모델러, 하이브리드 트랙커, 건축용 인터프리터로 구성되어 있다. 인터랙티브 VR 모델러는 가상테이블 상에서 건축 디자인을 보다 쉽고 직관적으로 할 수 있도록 그리드 인터랙션, 텐져블 프랍, 참조 객체와 같은 비주얼 및 택타일 가이드를 제공한다. 하이브리드 트랙커는 사용자 시야각에 따른 임의의 뷰포인트를 제공하는 기능과 핸드 인터랙션을 위한 비전 기반 트랙킹과 마그네틱 트랙킹을 포함하고, 건축용 인터프리터는 간단한 삼차원 매스를 건축적 정보를 포함한 기본 구성요소로 자동 변환하는 기능을 한다 제안 시스템은 다수의 사용자가 공동 작업을 하기에 적절하며 입체적인 뷰를 통하여 그래픽스 객체를 삼차원 공간에서 직접 조작할 수 있다는 장점이 있다. 이와 같이 본 시스템은 건축 시뮬레이션 및 사용자 참여 디자인에 유용하게 사용되어질 수 있다.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.254-264
• /
• 2019

This paper proposes an indirect current control technique based on a proportional resonant (PR) approach for the seamless mode transfer of utility interactive inverters. Direct-current and voltage hybrid control methods have been used for inverter control under grid-connected and islanded modes. A large bandwidth can be selected due to the structure of single-loop control. However, this results in poor dynamic transients due to sudden changes of the controller during mode changes. Therefore, inverter control based on indirect current is proposed to improve the dynamic transients by consistently controlling the output voltage under all of the operation modes. A PR-based indirect current control topology is used in this study to maintain the load voltage quality under all of the modes. The design processes of the PR-based triple loop are analyzed in detail while considering the system stability and dynamic transients. The mode transfer techniques are described in detail for both sudden unintentional islanding and islanded mode voltage quality improvements. In addition, they are described using the proposed indirect control structure. The proposed method is verified by the PSiM simulations and laboratory-scale VDER-HILS experiments.