• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.417-418
• /
• 2011

본 논문은 계통연계 형 3-레벨 NPC(Neutral Point Clamped)인버터의 고장진단 방법을 제안한다. 제안하는 고장진단 방법은 스위칭 소자의 개방고장 진단뿐만 아니라 고장 난 스위칭 소자의 위치 또한 판별 할 수 있다. 스위칭 소자의 고장 진단은 콘코디아 변환(Concordia transformation)에 의한 전류패턴의 반지름 변화로 판단 할 수 있다. 고장 난 스위칭 소자의 위치는 기존의 콘코디아 변환(Concordia transformation)에 의한 전류패턴을 분석하는 방법에 간단한 스위칭 동작을 추가함으로써 구분 할 수 있다. 제안하는 기법은 추가적인 센서가 필요하지 않고 전류신호에 기반을 두고 있으므로 시스템의 복잡한 모델링이 필요하지 않은 장점이 있다. 본 논문은 10kW급 태양광 계통연계 시스템을 모의한 시뮬레이션을 바탕으로 제안한 기법의 타당성을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.25-26
• /
• 2011

In some cases of grid connected system using photovoltaic modules, high voltage step up ratio is required. In this paper, non-isolated 2-stage cascaded boost converter with coupled inductor is proposed. Due to reduce the input current ripple and size of the inductor by using coupled inductor method, this topology is suitable for MIC(Module Integrated Converter). The operational characteristic of the proposed topology is verified through the theorical analysis, simulation and experimental waveform.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.646-651
• /
• 2015

In this paper, we analyze the architecture of a typical building automation systems and control points in the network architecture, interoperability, and performance aspects. We proposed a new virtualization-based point-to-point automatic control system that is connected to a high speed wired system. Cloud computing based automation system enables the user based environment control, and may perform a building energy management performance through the improvement of the building automation system efficiently In addition, the virtualization system makes it possible to perform the management of the group building load management operators efficiently.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.494_495
• /
• 2009

This paper presents a study of DFIG wind power generation system for real-time simulation. For real-time simulation, the real-time digital simulator (RTDS) and its user friendly interface simulation software (RSCAD) are used. 2.2MW grid-connected variable speed DFIG wind power generation system is modeled and analyzed in this study. Stator-flux oriented vector control scheme is applied to stator, rotor side converter control, and back-to-back PWM converters are implemented for the decoupled control. The real-wind speed signal extracted by an anemometer is used for realistic and accurate simulation analysis. Block diagrams for DFIG and control scheme of stator, rotor-side are introduced. Real-time simulation cases are carried out and analyzed for the validity of this work.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1055_1056
• /
• 2009

본 논문은 신.재생 에너지원 중 태양광을 이용한 소용량의 가정용 및 건물용 태양광 발전 시스템인 단상 계통연계형 인버터의 출력전류 고조파 발생에 대한 연구로서 상용제품에 대한 실험 결과를 제시하고, 이를 모의한 실험을 통하여 단상 계통연계형 인버터의 출력전류 고조파 억제를 위한 연구 근거로 제시한다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.470_471
• /
• 2009

When renewable energy sources fluctuated severely are connected with power system, as conventional plants compensate electrical output with a slow response it causes a frequency and voltage problems. In this paper, we can show that the power system can be operated reliably by connecting with the energy storage which has a fast response time through controlling charge or discharge of energy storage.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.511_512
• /
• 2009

본 논문에서는 IncCond(Incremental conductance) MPPT(Maximum Power Point Tracking) 알고리즘에 일사량을 변수로 하여 가변적인 step 사이즈를 적용함으로써 급격한 외부환경변화에 빠르게 동작하는 개선된 성능의 MPPT 제어기법을 제시하였고, 계통연계형 3kW 태양광 PCS(Power Conditioning System)의 기본적인 제어기를 설계함에 있어 제안한 MPPT 알고리즘과 연계해 빠른 동작특성을 갖는 DC/DC 부스트 컨버터의 제어기와 DC link 전압 제어기 및 인버터 제어기를 설계하였다. 이를 PSCAD/EMTDC 시뮬레이션 프로그램으로 구현하여 제안한 제어기의 성능을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.438_439
• /
• 2009

This paper analyzes the undervoltage protection based on the dynamic stability of a PV system at fault conditions. A 3 MW PV system is modeled by Matlab/Simulink. Then, the distribution system interconnected with the PV system is modeled. This paper simulates the various fault types and analyzes the stability of the PV system at fault conditions. It is concluded that the undervoltage protection of the grid-connected PV system in Korea standard needs to be modified based on the results of the stability analysis.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.440_441
• /
• 2009

The standard for the frequency protection of distributed generation in Korea Electric Power Corporation (KEPCO)'s standard doesn't include the setting of frequency protection. Therefore, this paper analyzes the correlation between the frequency protection requirements and the stability of grid-connected PV system for the adjustable operating setting of frequency protection. The distribution system interconnected with 3 MW PV system is modeled by Matlab/Simulink. The various value of frequency is simulated. For studied cases, the stability of PV system is analyzed. It is concluded that the operating setting of frequency protection can be determined by the stability of PV system.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.64_65
• /
• 2009

본 논문은 고창의 전력품질 실증시험장에서 계통에 연계된 풍력발전 시뮬레이터를 이용하여 풍력발전기의 특성을 파악하기 위해, 가변 풍속에서 이중여자 풍력발전기의 회전속도와 유효전력의 변화가 계통에 미치는 영향을 분석하였다. 선로의 길이를 40km로 가정하고, 기상청 자료를 근거로 풍속데이터를 이용한 가변풍속 패턴을 설정하여 풍력발전기의 회전속도에 대한 출력특성을 확인하였다.