• Journal of Korea Water Resources Association
• /
• v.31 no.3
• /
• pp.309-315
• /
• 1998

The grid-based KIneMatic wave STOrm Runoff Model (KIMSTORM) was applied to YoncheonDam watershed (1,875km2) located in the Imjin river basin of the Korea. Six maps which are DEM(Digital Elevation Model), stream, flow path, soil, land use and Thiessen network, were used for input data. The simulated streamflows resulting from two selected storm events agreed well with the observed flows at the watershed outlet. The results of temporal variations and spatial distributions are presented by using GRASS. Keyword : grid-based, storm-runoff model, GRASS-GIS, Yoncheon dam watershed.

• Journal of Environmental Science International
• /
• v.20 no.1
• /
• pp.93-106
• /
• 2011

Physically-based resampling scheme for roughness coefficient of surface runoff considering the spatial landuse distribution was suggested for the purpose of effective operational application of recent grid-based distributed rainfall runoff model. Generally grid scale(mother scale) of hydrologic modeling can be greater than the scale (child scale) of original GIS thematic digital map when the objective basin is wide or topographically simple, so the modeler uses large grid scale. The resampled roughness coefficient was estimated and compared using 3 different schemes of Predominant, Composite and Mosaic approaches and total runoff volume and peak streamflow were computed through distributed rainfall-runoff model. For quantitative assessment of biases between computational simulation and observation, runoff responses for the roughness estimated using the 3 different schemes were evaluated using MAPE(Mean Areal Percentage Error), RMSE(Root-Mean Squared Error), and COE(Coefficient of Efficiency). As a result, in the case of 500m scale Mosaic resampling for the natural and urban basin, the distribution of surface runoff roughness coefficient shows biggest difference from that of original scale but surface runoff simulation shows smallest, especially in peakflow rather than total runoff volume.

• Water Engineering Research
• /
• v.1 no.4
• /
• pp.321-330
• /
• 2000

The grid-based KIneMatic wave STOrm Runoff Model(Kim, 1998; Kim, et al., 1998) which predicts temporal variation and spatial distribution of overland flow, subsurface flow and stream flow was evaluated at two watersheds. This model adopts the single overland flowpath algorithm and simulates surface and/or subsurface water depth at each cell by using water balance of hydrologic components. The model programmed by C-language uses ASCII-formatted map data supported by the irregular gridded map of the GRASS(Geographic Resources Analysis Support System) GIS and generates the spatial distribution maps of discharge, flow depth and soil moisture of the watershed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.254-258
• /
• 2008

본 연구는 격자기반 운동파 강우유출모형 KIMSTORM(grid-based KIneMatic wave STOrm Runoff Model)의 기능을 개선하고 적용성을 평가하는 것이다. KIMSTORM은 김성준(1998)이 개발한 분포형 강우유출모형으로 포화상태의 지표흐름 및 토양수분상태의 시공간적인 분포를 파악할 수 있다. UNIX C++ 언어로 개발되었으며, GRASS 형태의 ASCII Grid를 입출력하도록 구성되어 있는 모형으로 UNIX 운영체제에서 구동이 가능하다. 그러나 UNIX와 GRASS는 최근에 많이 이용되지 않는 추세로 KIMSTORM 모형을 이용한 홍수유출해석이 적극적으로 활용되는데 주요 제약사항이 되어 왔다. 본 연구에서는 KIMSTORM을 윈도우즈 환경에서 운영될 수 있도록 FORTRAN 90을 이용하여 재개발하였으며 주요개선 사항으로, ESRI ASCII Grid 형태의 GIS(geographic information system) 자료 입력, 물리적 침투모의 방법인 GAML (Green-Ampt and Mein- Larson) 적용, 공간강우 입력가능, 정렬 알고리즘을 이용한 계산속도의 개선, 모형 자료입력 등 전처리 기능개선, 계산결과의 자동평가 및 분포도출력 등 후처리 방식개선으로 요약할 수 있다. 개선된 모형 GAML에 의한 침투방법을 적용하여, 남강댐유역($2,293\;km^2$)의 6개 강우사상을 대상으로 결정계수, Nash & Sutcliffe 모형효율계수, 용적편차, 첨두유량의 상대오차, 첨두시간의 절대오차를 이용하여 적용성을 평가하였으며, 민감도분석결과 초기토양수분조건과 하천조도계수가 가장 큰 민감도를 나타내었다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.520-521
• /
• 2008

This paper deals with simulation model of the micro-grid system based on the real power system and applying PV generation system to micro-grid system. PSCAD/EMTDC simulation model is developed for use in studying the effect of the dynamics of PV generation to the micro-grid system. Simulation results show that the addition of the PV system improves the voltage profile of the area. Case studies also show that power quality at the load side is improved via voltage compensation at the load bus.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.559-565
• /
• 2019

In order to alleviate the environmental pressure caused by production process of thermal power plants, the application of cleaner production is imperative. To estimate the implementation effects of cleaner production in thermal plants and optimize the strategy duly, it is of great significance to take a comprehensive evaluation for sustainable development. In this paper, a hybrid model that integrated the analytic hierarchy process (AHP) with least squares support vector machine (LSSVM) algorithm optimized by grid search (GS) algorithm is proposed. Based on the establishment of the evaluation index system, AHP is employed to pre-process the data and GS is introduced to optimize the parameters in LSSVM, which can avoid the randomness and inaccuracy of parameters' setting. The results demonstrate that the combined model is able to be employed in the comprehensive evaluation of the cleaner production in the thermal power plants.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.896-908
• /
• 2013

Under high grid impedance conditions, it is difficult to guarantee the stability of grid-connected inverters with an LCL filter designed based on ideal grid conditions. In this paper, the theoretical basis for output impedance calculation is introduced. Based on the small-signal model, the d-d channel closed-loop output impedance models adopting the converter-side current control method and the grid-side current control method are derived, respectively. Specifically, this paper shows how to simplify the stability analysis which is usually complemented based on the generalized Nyquist stability criterion (GNC). The stability of each current-controlled grid-connected system is analyzed via the proposed simplified method. Moreover, the influence of the LCL parameters on the stability margin of grid-connected inverter controlled with converter-side current is studied. It is shown that the stability of grid-connected systems is fully determined by the d-d channel output admittance of the grid-connected inverter and the inductive component of the grid impedance. Experimental results validate the proposed theoretical stability analysis.

• Journal of KIISE:Computing Practices and Letters
• /
• v.12 no.5
• /
• pp.275-285
• /
• 2006

This paper proposes an efficient market mechanism-based resource transaction model for grid computing. This model predicts the next resource demand of users and suggests reasonable resource price for both of customers and resource providers. This model increases resource transactions between customers and resource providers and reduces the average of transaction response times from resource providers. For prediction accuracy improvement of resource demands and suggestion of reasonable resource price, this model introduces a statistics-based prediction model and a price decision model of microeconomics. For performance evaluating, this paper measures resource demand prediction accuracy rate of users, response time of resource transaction, the number of resource transactions, and resource utilization. With 87.45% of reliable prediction accuracy, this model works on the less 72.39% of response time than existing resource transaction models in a grid computing environment. The number of transactions and the resource utilization increase up to 162.56% and up to 230%, respectively.

• Steel and Composite Structures
• /
• v.33 no.4
• /
• pp.537-550
• /
• 2019

Korea and Japan have done a lot of research on composite girders with corrugated steel webs and built many bridges with corrugated steel webs due to the significant advantages of this type of bridges. Considering the demanding on the calculation method of such types of bridges and lack of relevant reinforcement design method, this paper proposes the spatial grid analysis theory and tensile stress region method. First, the accuracy and applicability of spatial grid model in analyzing composite girders with corrugated steel webs was validated by the comparison with models using shell and solid elements. Then, in a real engineering practice, the reinforcement designs from tensile stress region method based on spatial grid model, design empirical method and specification method are compared. The results show that the tensile stress region reinforcement design method can realize the inplane and out-of-plane reinforcement design in the top and bottom slabs in bridges with corrugated steel webs. The economy and precision of reinforcement design using the tensile stress region method is emphasized. Therefore, the tensile stress region reinforcement design method based on the spatial grid model can provide a new direction for the refined design of composite box girder with corrugated steel webs.

• Computers and Concrete
• /
• v.27 no.5
• /
• pp.407-416
• /
• 2021

The checking stresses in the Chinese codes for reinforced concrete (RC) or prestressed concrete (PC) bridges are aimed for the thin-web beam, which cannot reflect the actual behavior of the modern structures. The incompleteness of the checking stresses could give rise to the deficiency in the design and calculation, and unable to reveal the reason of some common cracks in the structure. In this paper, the complete stress checklist for RC or PC girder bridges are listed, as well as the corresponding crack shapes. The expression of the complete checking stresses is proposed in details. Spatial Grid Model can reflect all the concerned stresses in the structure. Through the comparison of the calculation results from the spatial grid model and the solid model, it is seen that the spatial grid model can reflect load effects such as shear lag effect, thin-wall effect and local effect. The stresses obtained from the spatial grid model could help engineers to have a good understanding of the structural behavior. Meanwhile, the stress checklist provides the information for analyzing and solving the deficiency in the structure.