• 한국측량학회지
• /
• 제16권1호
• /
• pp.67-74
• /
• 1998

본 연구에서는 PC환경에서 축척 1:5,000의 지형도를 원 데이터로 하여 등고선 레이어를 만들고, 이를 이용하여 TIN과 GRID 데이터 구조 기반의 수치지형모델을 생성하여 지령분석에 관한 연구를 수행하였다. 지성선(breakline) 을 고려하지 않은 경우와 고려한 경우에 대해 각각의 데이터 구조 기반별 수치지형모델을 생성하고 실행 시간, 저장 파일의 크기, 평균 표고, 표준 편차 등을 분석하였으며, 격자 데이터 구조 기반의 경우 $5\times{5m},\;l0\times{10m},\;15\times{15m},\;l0\times{30m},\;45\times{45m},\;60\times{60m}$의 셀 크기를 고려한 사면경사도와 경사방위도를 생성하여 비교ㆍ분석하였다 실험 결과 다음과 같은 결론을 얻었다. TIN과 GRID기반의 DTM을 생성시에는 지정의 기복이 심할수록 지정특징인 지성선을 고려하는 것이 실제지형을 보다 정교하게 표현하는 방법임을 알 수 있었다. 격자 크기를 증가시켜도 평균표고는 큰 변화를 나타내지 않았다. 그러나 격자 크기가 커질수록 실행시간은 상당히 단축되었고 저장공간 또한 매우 작아짐을 알 수 있었다. 따라서 DTM을 응용분야에 보다 효율적으로 적용하기 위해서는 최적의 격자크기를 결정하는 것이 선결 과제임을 알 수 있었다. 사면경사각과 경사방위각 계산을 수행한 결과 대조적인 작은 변화를 나타냈다. 사면경사각은 격자 크기가 커질수록 작아지는 경향을 나타낸 반면 경사방위각은 격자 크기가 커질수록 커지는 경향을 나타냈다.

• 지질공학
• /
• 제25권3호
• /
• pp.369-376
• /
• 2015

최근 국내에서 터널 내 지하수 유출량 산정을 위해 MODFLOW와 같은 지하수 수치모델이 많이 이용되고 있다. 수치 모델의 경우 격자망 설계가 터널 유출량 산정 결과에 큰 영향을 주는 것으로 알려져 있으나, 모델 설계 시 명확한 기준없이 연구자에 따라 임의의 크기로 격자망이 설정되어 왔다. 따라서 본 논문에서는 해석해와 수치해를 비교하는 방법을 통하여 격자의 크기가 수치모델의 유출량 산정 오차에 미치는 영향을 분석하였으며, 최적의 격자망 설정 방법을 제시하였다. 해석해와 수치해의 불일치는 부적절한 격자망 설정뿐만 아니라 모델 영역의 경계 효과에 의해서도 발생하는 것으로 나타났다. 따라서 수치모델의 경계 효과 성분을 제거한 후 격자의 크기가 터널 유출량 산정 오차에 미치는 영향을 분석하였으며, 결론적으로 정확한 유출량 산정 결과를 나타내는 터널 크기와 격자 크기의 관계식을 도출하였다. 도출된 관계식은 유한차분 수치모델에서 등가우물격자반경과 격자 크기와의 관계식과 동일한 것으로 나타났다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제31권2호
• /
• pp.159-177
• /
• 2022

Purpose Online reviews are critical for sales of online shopping platforms because they provide useful information to consumers. As the eCommerce market grows rapidly, the role of online reviews is becoming more important. The purpose of this study is to analyze how online reviews written by domestic consumers affect product sales by classifying the types of products. Design/methodology/approach This study analyzed how the effects of review characteristics(reviewer reputation, reviewer exposure, review length, time, rating, image, and emotional score) on the usefulness of online reviews differ depending on the product types. Subsequently, how the impact of review attributes (review usefulness, number of reviews, ratings, and emotional scores) on product sales differs according to each product type was compared. Based on the FCB Grid model, the product type was classified into high involvement-rational, high involvement-emotional, low involvement -rational, and low involvement-emotional product types. Findings According to the analysis result, the characteristics of reviews useful to consumers were different for each product type, and the review attributes affecting product sales were also different for each product type. This study confirmed that it revealed that product characteristics are major consideration in evaluating the review usefulness and the factors affecting product sales.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.435-438
• /
• 2001

Reverse engineering technology refers to the process that creates a CAD model of an existing part using measuring devices. Recently, non-contact scanning devices have become more accurate and the speed of data acquisition has increased drastically. However, they generate thousands of points per second and various types of point data. Therefore, it becomes a major issue to handle the huge amount and various types of point data. To generate a CAD model from scanned point data efficiently, these point data should be well arranged through point data handling processes such as data reduction and segmentation. This paper proposes a new point data handling method using 3D grids. The geometric information of a part is extracted from point cloud data by estimating normal values of the points. The non-uniform 3D grids for data reduction and segmentation are generated based on the geometric information. Through these data reduction and segmentation processes, it is possible to create CAD models autmatically and efficiently. The proposed method is applied to two quardric medels and the results are discussed.

• 무역학회지
• /
• 제44권1호
• /
• pp.269-283
• /
• 2019

Due to environmental issues such as global warming, the importance of renewable energy is growing. Solar Power System is one of the most growing eco-friendly energy industries in the world, but Korea's solar energy industry faces fierce competition due to the trade regulations and changes in energy related laws in the major markets such as the U.S., EU and China. Therefore, Korea needs to diversify its export markets towards emerging markets. This paper analyzed 162 countries in the world and developed a model to measure how promising the countries are. GSMI(Grid connected Solar Market Index) and OSMI(Off-grid Solar Market Index) are invented based on the models. By using the developed model and the data of 162 countries over the 15-year period from 2000 to 2014, the foreign markets are ranked for searching the export market. According to the analysis, China, Japan, U.S, India and Taiwan ranked first to fifth in GSMI and OSMI ranking, which were followed by China, India, Bangladesh, Philippines and Afghanistan. The model developed through this research is expected to provide a more reasonable and scientific approach to the advancement of the Korean solar energy industry into overseas markets.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.924-925
• /
• 2008

There are many types of grid-connected inverter controllers, PI controller based is the most popular methods. But, a common PI control is produced zero-steady state error and phase delay in sinusoidal reference. Synchronous reference frame or DQ transform based controller is capable for reducing both of zero-steady state error and phase delay is. But DQ transform based controller has cross-coupling component which difficult to analyze the system in single phase model. In this paper, to obtained single phase model of the system, DQ transform based controller is analyzed in two techniques. The first is by neglecting cross-coupling. The second is eliminated cross-coupling component by decoupling method. By these two techniques, single phase model is obtained. Then, the single phase model is analyzed to evaluate its performance in stability and frequency response, through Root Locus and Bode diagram, respectively. MATLAB and PSIM simulation is used to verify the analysis. Simulation result is shown; cross-coupling component has no significant influent to the controller.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권1호
• /
• pp.87-107
• /
• 2015

Considering the localization estimation issue in mixed line-of-sight (LOS)/non-LOS(NLOS) environments based on received signal strength (RSS) measurements in wireless sensor networks, a grid-based correlation method based on the relationship between distance and RSS is proposed in this paper. The Maximum-Likelihood (ML) estimator is appended to further improve the localization accuracy. Furthermore, in order to reduce computation load and enhance performance, an improved recursively version with NLOS mitigation is also proposed. The most advantages of the proposed localization algorithm is that, it does not need any prior knowledge of the propagation model parameters and therefore does not need any offline calibration effort to calibrate the model parameters in harsh environments, which makes it more convenient for rapid implementation in practical applications. The simulation and experimental results evidence that the proposed localization algorithm exhibits good localization performance and flexibilities for different devices.

• 한국수자원학회논문집
• /
• 제41권5호
• /
• pp.455-462
• /
• 2008

본 연구에서는 격자강우량과 격자기반의 수문정보와 연계하여 홍수기 유출량의 시공간적 분포를 파악할 수 있도록 물리적인 운동파(kinematic wave)이론에 근거한 분포형 강우-유출모형을 개발하였다. 이 모형은 홍수기동안의 지표흐름과 지표하 흐름의 시간적 변화와 공간적 분포를 모의할 수 있으며, 전처리과정으로서 ArcGIS 혹은 ArcView등의 GIS 프로그램을 이용하여 모형에 필요한 ASCII형태의 입력 매개변수 자료들을 가공하였다. 또한 후처리과정으로서 모형의 수행결과인 유역내의 유출량 분포 등을 GIS상에서 나타낼 수 있도록 ASCII형태로 출력하도록 구성하였다. 개발된 모형의 적용가능성을 검토하기 위하여 남강댐유역을 대상으로 유역을 500m의 정방형 격자로 분할하고 수계망을 통하여 유역 출구까지 운동파이론에 의해 추적 계산하였으며, 수문곡선 비교결과 재현성 높은 결과를 보여주었다.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.2050-2058
• /
• 2018

Impulse characteristic of transmission tower grounding grid is needed for lightning protection of transmission line. This paper describes an outdoor experimental test facility established for large-scale grounding grid of transmission tower, made up of four impulse current generators and a circle current return electrode. The amplitude of impulse current is up to 100 kA. The results of the CDEGS simulation and GPR measurement reveal the uniform current distribution in the test arrangement. An impulse test for a square electrode with extended conductors is carried out in condition of three current waveforms with different amplitude. Based on the electrical network model and iterative algorithm method, a calculation model is proposed to simulate the impulse characteristic of large-scale grounding grid considering soil ionization. The curve of impulse resistance against the current amplitude shows the soil ionization both from the simulation and test. Deviation between the simulation and test result is less than 15%.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.547-557
• /
• 2018

This work proposes a control method of frequency stabilization for grid integration of large-scale wind farms via the voltage source converter-based high-voltage direct current (VSC-HVDC) technology. First, the topology of grid integration of a large-scale wind farm via the VSC-HVDC link is provided, and simple control strategies for wind turbines, wind farm side VSC (WFVSC), and grid side VSC are presented. Second, a mathematical model between the phase angle of WFVSC and the frequency of the wind farm is established. The control principle of the large-scale wind power integrated system is analyzed in theory in accordance with the mathematical model. Third, frequency and AC voltage controllers of WFVSC are designed based on the mathematical model of the relationships between the phase angle of WFVSC and the frequency of the wind farm, and between the modulation index of WFVSC and the voltage of the wind farm. Corresponding controller structures are established by deriving a transfer function, and an optimization method for selecting the parameters of the frequency controller is presented. Finally, a case study is performed under different operating conditions by using the DIgSILENT/PowerFactory software. Results show that the proposed control method has good performance in the frequency stabilization of the large-scale wind power integrated system via the VSC-HVDC technology.