• Asian Journal of Atmospheric Environment
• /
• v.4 no.1
• /
• pp.33-41
• /
• 2010

Because ammonia from livestock production may substantially contribute to environmental pollution, emissions from all possible sources (housing systems, manure storage, manure application, outside grazing) should be reduced. The purpose of this study was to investigate the effect of different bedding materials on ammonia emissions in a cow house. By applying a combination of four treatment types: treatment $1-T_1$ (sawdust (50%)+sawdust pellets (50%)), treatment $2-T_2$ (sawdust (50%)+corn stalk pellets (50%)), treatment $3-T_3$ (sawdust (100%)), and treatment $4-T_4$ (sawdust (50%)+palm kernel meal pellets(50%)) as bedding materials in a cow house, the effects of such treatments on ammonia flux were assessed in approximately one month. The magnitude of ammonia emissions (mg $m^{-2}\;min^{-1}$) varied in the following order: $T_1$(2.226), $T_4$(2.052), $T_2$(1.845), and $T_3$(1.712). The patterns of pH had a decreasing trend for all bedding treatments during the experiment, and there was no significant relationship with ammonia flux. The results reveal that the most important factor influencing ammonia emissions is the physical structure of the bedding types.

• Journal of the Korean Ceramic Society
• /
• v.40 no.2
• /
• pp.146-152
• /
• 2003

The waste ferrites from magnetic core manufacturing process were used to $CO_2$gas decomposition to avoid the greenhouse effects. The waste ferrites are the mixed powder of Ni-Zn and Mn-Zn ferrites core. In the reduction of ferrites by 5% $H_2/Ar$ mixed gas, the weight loss of ferrites was about 14~16wt%. After the$CO_2$gas decomposition reaction, the weight of the reduced ferrites was increased up to 11wt%.$CO_2$gas was decomposed by oxidation of Fe and FeO in reduced compound and the phase of the waste ferrite was changed to spinel structure. A new technique capable of$CO_2$decomposition as low cost process through utilizing waste ferrite was development.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.150-159
• /
• 2014

Since the release of mid-term domestic GHG goals until 2020, in 2009, some various GHG reduction policies have been proposed. There are two types of modeling approaches for identifying options required to meet greenhouse gas (GHG) abatement targets and assessing their economic impacts: top-down and bottom-up models. Examples of the bottom-up optimization models include MARKAL, MESSAGE, LEAP, and AIM, all of which are developed based on linear programming (LP) with a few differences in user interface and database utilization. In this paper, we suggest a simplified LP formulation and how can build it through step-by-step procedures.

• The Plant Pathology Journal
• /
• v.23 no.3
• /
• pp.180-186
• /
• 2007

The biocontrol agent, Serratia plymuthica A21-4, has been developed for controlling pepper Phytophthora blight. Serratia plymuthica A21-4 strongly inhibits the mycelial growth, zoospore formation, and cyst germination of Phytophthora capsici in vitro. The application of a cell suspension of strain A21-4 to pepper plants in pot experiments and in greenhouse successfully controlled the disease. The bacteria produced a potent antifungal substance which was a key factor in the suppression of Phytophthora capsici. The most active chemical com-pound was isolated and purified by antifungal activity-guided fractionation. The chemical structure was identified as a chlorinated macrolide $(C_{23}H_{31}O_8Cl)$ by spectroscopic (UV, IR, MS, and NMR) data, and was named macrocyclic lactone A21-4. The active compound significantly inhibited the formation of zoosporangia and zoospore and germination of cyst of P. capsici at concentrations lower than $0.0625{\mu}g/ml$. The effective concentrations of the macrocyclic lactone A21-4 for $ED_{50}$ of mycelial growth inhibition were $0.25{\mu}g/ml,\;0.25{\mu}g/ml,\;0.30{\mu}g/ml \;and\;0.75{\mu}g/ml$ against P. capsici, Pythium ultimum, Sclerotinia sclerotiorum and Botrytis cinerea, respectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.5
• /
• pp.138-144
• /
• 2012

Recent environmental issues such as exhaust gas and greenhouse effect make the agricultural machinery market takes into account the hybrid and electric propulsion technology used in automotive engineering. Generally the agricultural machinery, particularly an agricultural tractor, needs large load capacity and long continuous operating time comparing with conventional vehicles. In case of a pure electric tractor, it is necessary for considering large capacity batteries and long charging time. Therefore we take an AER extended PHEV (All Electric Range extended Plug-in Hybrid Electric Vehicle) power transmission system in developing an electric tractor in this study. First we propose a PHEV powertrain structure in order to substitute the conventional diesel engine equipped tractor. And we performed the road tests using a conventional mechanical tractor with various load conditions, which were classified and statistically treated real agricultural works. The test results were analysed with respect to the power characteristics of the power source. Finally using the test result, we designed two-stepped reduction gear ratios in the proposed an electric tractor powertrain for carrying out typical agricultural works.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.2
• /
• pp.434-437
• /
• 2005

During the screening for the inhibitors of cellulose biosynthesis as herbicides, we discovered a Streptomyces sp. A6497 with a selective antifungal activity against cellulose containing Phytophthora parasitica, but not against cellulose lacking Candida albicans. The inhibitor was isolated and identified, using a series of chromatographies. Based on structure analyses with UV spectrophotometry, mass and various NMR, the inhibitor was identified as sangivamycin. The compound exhibited strong antifungal activities against P. parasitica (MIC; 3.125 $\mu$g/ml). In particular, it showed strong herbicidal activities against various weeds in the greenhouse experiment. Taken together, these results suggest that sangivamycin is a useful lead compound for the development of new herbicides.

• Journal of Bio-Environment Control
• /
• v.3 no.1
• /
• pp.10-19
• /
• 1994

Wind load is known to be one of major forces to influence the stability of agricultural structures. General flow fields were calculated to determine flow characteristics over the envelop of the following three types of greenhouses with arched roof : single span, twin span greenhouses, and two single span greenhouses apart 3m inbetween. Pressure coefficients along the envelop of greenhouse were numerically calculated by the k-$\varepsilon$ turbulence model, which lead to determine wind forces on it. Curvilinear coordinate for an arched roof and the upwind scheme were adopted for the study. The calculated pressure coefficients were validated with the avaliable data of Japanese Standard and NGAM Standard. The Magnitude of calculated forces over the envelop was not in good accordance with data except the windward wall. Even tile data of Japanese and NGAM Standard for validation deviated a lot from each other in quantity and quality. Such discrepancy may be attributed to different geometric and/or flow configuration conditions for experiments, or the insenstivity of the k-$\varepsilon$ turbulence model to recirculation flow.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.6
• /
• pp.27-37
• /
• 2014

Heat island is caused by changes of land coverage structure of cities and use of energy in buildings. As a result energy use in buildings get to increase further followed by rising of GHG emission and deteriorating climate change. Eco-friendly housing complex is a kind of plan that applies environmental control elements like water and green spaces to housing complex. With these methods, it can be expected to create thermal environment of indoor and outdoor. In this paper quantitative examination is studied on using CFD to find out the effects of river, water permeable, parks and planting on thermal environment. And by comparing field measurements with CFD results which are aimed to development phase housing complex, feasibility and usability of the CFD analysis results are confirmed. And also, analysis on the ventilation performance followed by natural ventilation system is analyzed by selecting one building in housing complex. Based on the results, the possibilities of energy reduction through making thermal environment and applying natural ventilation are studied. With these outcomes, creating thermal conditions and using natural ventilation would be contributed to GHG reduction.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.612-618
• /
• 2009

Recently the roles of railways about the prevention of global warming caused by greenhouse gases and for low carbon green growth are larger than ever. And the railroad-related research institutions have been active in researching for energy conservation. Especially the urban railroad has been emerged as the best means of transportation compared to the general public transportation systems in punctuality, stability, ecology and etc. In operating the urban railroad system there are various ways for energy savings. In the larger category, One is the hardware aspect according to the structure of the vehicle and the development of control systems. The other is the software aspect which efficient train operation can be made through control of driving patterns and driving diagram. In this paper, there is sense to analyze the result in verifying expectation relation with variable and the use of electric power on this after selecting main variables that can influence to the energy of the train operation in the software aspect. First, after collecting the basic data related to operation(train speed, operating hours, power consumption, the position of stopping station, electrical power system etc.) and according to this, investigating the consumption of the energy of the operation, in the side of energy consumption deducing and analyzing problem, this will be found solutions.

• Journal of Environmental Policy
• /
• v.6 no.2
• /
• pp.27-45
• /
• 2007

This paper presents a method for developing the performance assessment of energy conservation and efficiency based on baseline and target adjustment approach. Energy consumption is related with output level and production structure. This paper suggests improvement for target establishment and performance assessment with regard to real output level in target year. Numerical illustrations of baseline and target adjustment method are shown different compared with the general assessment results. This study will contribute to applying the conformity assessment and Greenhouse Gas Emissions verification system.