• Membrane and Water Treatment
• /
• v.11 no.3
• /
• pp.173-177
• /
• 2020

Wastewater treatment plants (WWTPs) have been recognized as one of the significant greenhouse gas (GHG) generators, due to the complex biochemical reaction and huge consumption of energy and materials. Recently, WWTPs have been built underground and they will be confronted with the challenges of mitigating GHG emissions and improving the quality of treated wastewater. Here, we focus on estimating GHG emissions to set up effective management plans for a WWTP built underground. First, we apply the process-based life cycle assessment (LCA) with an inventory database of the underground WWTP for a case study. Then, we identify significant factors affecting GHG emissions during service life using sensitivity analysis and suggest the proper tactics that could properly reduce GHG emissions from the WWTP.

• Journal of Climate Change Research
• /
• v.9 no.1
• /
• pp.69-74
• /
• 2018

The purpose of this study is to suggest the methodology of $CO_2$ Emission Factor Verification and Quantitative Assessment in Ethylene Product Processes. At first, this study compare the IPCC (Intergovernmental Panel on Climate Change) 1996 Guideline and 2006 Guideline. And analyse methodology for estimating $CO_2$ emission and $CO_2$ emission factor in Ethylene product process. Also analyse cases of estimating $CO_2$ emission factor based on material balance. Methodology of $CO_2$ Emission Factor Verification and Quantitative Assessment are following the categories proposed by GIR (Greenhouse Gas Inventory and Research Center). There are total 12 factors in 8 categories and give 5 or 10 points according to their importance. Also this study suggests necessary data of document to meet the conditions. The result would help estimate accuracy Greenhouse Gas Inventory. Also contribute to establish policy on environmental assessment, air conservation, etc.

• Journal of Climate Change Research
• /
• v.4 no.1
• /
• pp.27-39
• /
• 2013

In this study, the anthracite coal being used as fuel in Korea were classified into different types. These types include the domestically produced anthracite, imported anthracite used as raw material, and imported anthracite used as fuel. Each of the calorific values and greenhouse gas emission factors were calculated. The calculation of greenhouse gas emission factors resulted in the domestically produced anthracite as $111,477{\pm}4,508kg\;CO_2/TJ$, the imported anthracite used as raw material as $108,358{\pm}4,033kg\;CO_2/TJ$, and anthracite used as fuel was displayed as $103,927{\pm}8,367kg\;CO_2/TJ$. Additionally, the amount of greenhouse gas emission based on these calculated emission factors was displayed as $6,216,942ton\;CO_2$, which resulted as 12.7% lower than the green house gas emission amount which was calculated without distinguishing anthracite coal in details. Therefore, collecting activity data through a detailed classification of anthracites facilitate a more accurate calculation of greenhouse gas emission amount compared to collecting activity data through combination. Furthermore, since the anthracite coal used domestically possesses characteristics differing from the anthracite coal proposed by the IPCC, anthracite coal should be classified for each purpose and calculated for the improvement of the national greenhouse gas inventory.

• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.289-297
• /
• 2016

In this study, we researched the emission source category and it was calculated emissions estimates from existing research or literature review related to port. In addition, we have created the basis for a policy that can reduce greenhouse gas emissions calculation based on the results of the harbor. Greenhouse gas emissions estimation results, we proposed a method for allocating the GIS space. In this study, we confirmed based on the calculated greenhouse gas emissions by sources resulting in the GIS Map Port result of the expression construct for space allocation. Based on these results, it tries to provide the basic data that can be used when you want to create a local government measures to reduce scenario in the future.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.2
• /
• pp.161-174
• /
• 2014

The methodology report '2006 IPCC Guidelines for National Greenhouse Gas Inventories' shows higher tier method can be a good practice, which uses country-specific or plant-specific data when calculating greenhouse gas emissions by country. We review the methodology report to present principles of using plant-level data and also examine examples of using plant-level data in chemical and metal industry in 20 countries for the purpose of quality improvement of national greenhouse gas inventories. We propose that Korea consider utilizing plant-level data, as reported according to 'Greenhouse gas and Energy Target Management Scheme', in the following order as a preference. First, the data can be utilized for quality control of Korea's own parameters, when Tier 2 method is adopted and bottom-up approach is not applicable. Second, both plant-level data and IPCC default data can be used together, combining Tier 1 method with Tier 3 method. Third, we can also use acquired plant-level data and country specific parameters, combining Tier 2 method with Tier 3 method. Fourth, if the plant-level data involves all categories of emissions and the data is proven to be representative, we can apply Tier 3 method. In this case, we still need to examine the data to check its reliability by a consistent framework, including appropriate quality control.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.108-117
• /
• 2016

In this paper, a portal system compatible with MRV regulation was designed to monitoring, reporting and verifying $CO_2$ emission and fuel consumption data from an international ship. A portal system supports monitoring and reporting task of international shipping companies and calculates national greenhouse gas inventory. EU MRV law, MRV discussions of IMO, responses of international shipping companies to ship energy efficiency and greenhouse gas regulation, and greenhouse gas statistics on international shipping were analyzed to drive portal system requirements. For ship energy efficiency and $CO_2$ emitted monitoring, a data collection module was designed based on on-board equipment, energy efficiency measuring device and navigation report. Data transfer module with easy management and minimized usage to transfer ship data to shore was designed. A portal system was designed to convert the collected data into the standard reporting format, perform monitoring, statical analysis, verification and auto report generation, and support national greenhouse gas inventory.

• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.667-676
• /
• 2013

This study analyzed the energy demand, greenhouse gas emission and greenhouse gas reduction potential of Electronic Electrical components company. The LEAP model targeting long term energy plan was used to establish the most efficient plan for the companies by examining the climate change policy of government and the countermeasures by companies. A scenario was created by having 11 greenhouse gases reduction plans to be introduced from 2011 as the basic plan. Regarding input data, energy consumption by business place and by use, number of employee from 2009 to 2012, land area and change in number of business places were utilized. The study result suggested that approximately 13,800 TJ of energy will be spent in 2020, which is more than 2 times of 2012 energy consumption. When the integrated scenario based on the reduction plan of companies would be enforced, approximately 3,000 TJ will be reduced in 2020. The emission of greenhouse gases until 2020 was forecasted as approximately 760,000 ton $CO_2eq$. When the integrated scenario would be enforced, the emission will be approximately 610,000 ton $CO_2eq$, which is decrease by approximately 150,000 ton $CO_2eq$. This study will help the efficient responding of eElectronic Electrical components company in preparing detail report on objective management system and enforcement plan. It will also contribute in their image as environment-friendly companies by properly responding to the regulation reinforcement of government and greenhouse gases emission target based on environment policy.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.75-84
• /
• 2012

Current estimation of greenhouse gas (GHG) emissions from livestock agriculture in Korea was based on Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories (1996 IPCC GL) published in 1996 and emission data were published in National Inventory Report. New guideline book, 2006 IPCC Guidelines for National Greenhouse Gas Inventories (2006 IPCC GL), however, was published in 2006. Hence preparation to apply new guideline for the estimation of GHG emission would be necessary. In this study, 1996 IPCC GL and 2006 IPCC GL for livestock agriculture were compared. Estimated GHG emissions based on Tier 1 methods of 1996 IPCC GL and 2006 IPCC GL between 2000 and 2008 were also compared. Estimated GHG emissions based on 2006 IPCC GL were 1.27~1.33 times higher than those based on 1996 IPCC GL. These results were mainly caused by emission factors of each IPCC GL. More researches should be conducted to decrease uncertainties of national GHG inventories.

• Journal of Environmental Science International
• /
• v.22 no.9
• /
• pp.1105-1113
• /
• 2013

This paper attempted to estimate the emissions of HFC-134a from scrap truck as a result of measuring the residual quantities of HFC-134a in air conditioner of scrap truck. We measured the residual amounts in the scrap truck of 138 by applying commercial recover for refrigerants. The average residual rate(disposal-phase emission factor) is reported to be $44.3{\pm}3.3%$ within a confidence interval of 95%. Recent year model trucks exhibit the higher residual rates. Little variation, however, is observed in regard to vehicle size. The HFC-134a emission quantity from scrap truck in 2011 is estimated to be 55,908 $tCO_2$-eq that demonstrates 21.4% increase to compare with that in 2007. As the numbers of truck have increased dramatically during the last two decades, the emissions of HFC-134a from scrap truck would increase sharply in the next coming years. HFC-134a is a very high GWP greenhouse gas. therefore have to reduce the emissions from the scrap truck and need to find ways to recycle. The chemical compositions of refrigerants from scrap truck are quite similar to those of new refrigerants, suggesting that the refrigerants from scrap truck could be reused as refrigerant.

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.694-702
• /
• 2014

Since Greenhouse Gas Inventory & Research Center (GIR) of Korea was founded in 2010, the annual greenhouse gas inventory reports, one of the collections of GIR's major affairs, have been published from 2012. In the reports many items related to greenhouse gas emission quantities are included, but among them uncertainty values are replaced to basic values which IPCC guideline suggests. Even though IPCC guideline suggests the equations of each Tier level in details, the guideline recommends developing nation's own methodology on uncertainty which is closely related to statistical problems such as the estimation of a probability density function or Monte carlo methods. In the road transportation sector the emissions have been calculated by Tier 1 but the uncertainties have not been reported. This study introduce a bootstrap technique and Monte carlo method to estimates annual emission quantity and uncertainty, given activity data and emission factors such as annual traveled distances, fuel efficiencies and emission coefficients.