• Title/Summary/Keyword: Green plants

Search Result 1,085, Processing Time 0.032 seconds

Studies on the Prevention of Menace to Public Health by the Ornamental Tree -Especially in South Area of Korea- (조경수목(造景樹木)에 의(依)한 공해방지(公害防止)에 관(関)한 연구(硏究) -특(特)히 남부지역(南部地域)을 중심(中心)으로-)

  • Kim, Oue-Ryong;Kim, Jae-Saing
    • Journal of Korean Society of Forest Science
    • /
    • v.55 no.1
    • /
    • pp.37-46
    • /
    • 1982
  • These studies were carried out to know the measure of damage having an effect on the ornamental trees owing to sulfurous acid gas($So_2$) which injures much forest trees among air pollutions in south area of Korean and to know the difference of smoke resistance on the five representative species among them and therefore to establish the preventive measure of air pollutions in industrial complex of south area of Korea by the ornamental trees. The reaction formula utilized was $Na_2So_2+H_2So_4$ $Na_2So_4+H_O+So_4$. The results obtained were as follows. 1) The ornamental trees surveyed in the industrial complexes of Ul-San, Chang-Won and Po-hang belonged to 51 species, 161,699 trees in all. The most five species among 51 sorts of woody plants were Populus tomentiglandulosa, Buxus microphylla, Forsythia korenan, Juniperus chinensis and Pinus densiflora. 2) The relation between the concentration of sulfurous acid gas($So_2$) and the damage rate upon investigation in each species: In case of low concentration the destructive quantities of cells of woody plants, and the more increased the concentrations, the more increased the amount of damage. 3) The difference of smoke resistance among five species showed to be the strongest in Buxus micorphylla, the second rand Pupulus tomentiglandulosa, the third rand Forsythia koreana, the fourth rank Juniperus chinensis and the weakest in Pinus densiflora. 4) The ornamental trees of industrial complex expecially in south area of Korea in future should be planted gradually broad-leaved trees which have strong sprout, smoke resistance and thick leaved rather than comifers. 5) I think that the area of city forest in industrial complex requires about $50m^2$ per head of population and about 100m width of green belt between industrial area and residential district.

  • PDF

Studies on the Effects of Hydrogen Fluoride Gas in Paddy Rice and Weeds at Fluorine Damaged Site (불화수소(弗化水素)가스에 의(依)한 수도(水稻) 및 잡초(雜草)의 피해(被害) 조사연구(調査硏究))

  • Kim, Bok-Young;Cho, Jae-Kyu
    • Korean Journal of Environmental Agriculture
    • /
    • v.2 no.2
    • /
    • pp.98-102
    • /
    • 1983
  • The hydrogen fluoride gas generated from making the cement hardener injured the plants growing at the neighbour field. This investigation was conducted on sample analysis of hydrogen fluoride gas damage plants which included the ratios of destroyed leaves, damage symptoms, and nutrient elements in paddy rice and weeds. The results obtained were as follows; 1) The ratio of destroyed leaves at near HF source was very high reaching about 95% at 100m, 65% at 500m, 5% at 2㎞, respectively. 2) The necrosis was the characteristic symptom of fluoride injury on rice plant and occurred predominantly at the tip and margins of damage leaf. It developed along the tip and margins of leaves with a dull, gray-green, water soaked discoloration. 3) The fluorine content of tip and margins of damaged rice leaves were 1,600 ppm, 3 to 20 times higher than that of center part and it ranged from 130 to 242.5 ppm in weed leaves, but from 10 to 15 ppm in normal weed leaves. 4) The contents of calcium, potassium, silicon, iron and manganese were higher in tip and margins than in the center of rice damage leaves. 5) The Cocculus trilolous. D.C was the most resistant plant to HF gas than any other plant growing in this site, while wild berry and aralia tree belong to most sensitive plant group.

  • PDF

Histological studies on in vitro Propagation of Pulsatilla koreana Nakai (할미꽃 기내증식(器內增殖)에 관(關)한 조직학적(組織學的) 연구(硏究))

  • Lee, Man-Sang;Oh, Ki-Hong
    • Korean Journal of Medicinal Crop Science
    • /
    • v.1 no.2
    • /
    • pp.137-157
    • /
    • 1993
  • This study was carried out to investigate the optimal condition for multiple propagation through leaf tissue culture and to apply anther culture techniques to Pulsatilla koreana Nakai breeding. Leaf and anther of Pulsatilla koreana Nakai were cultured on MS, MT, LS and $B_5$ media supplemented with several growth regulators and nitrogen sources under various conditions. For callus induction and differentiation from the Pulsatilla koreana leaf segments were more effective in the combination of zeatin and auxin than auxin alone. The color of the callus was green when treated with IBA alone. Shoot differentiation was more effective when treated with zeatin than auxin alone, especially the best hormoal combination for shoot differentiation was zeatin 1.0mg/l +NAA 0.1mg/l, while 2,4-D inhibited shoot differentiation. The appeared rate of S pollen was 35% in vivo, while that of S pollen by low temperature$(4^{\circ}C)$ pretreatment for 4 days was increased by 53% and the optimum culture time for callus induction from anther was uni-nucleate stage. $B_5$ basal medium supplemented with NAA 0.5mg/l and zeatin 1 mg/l was the most effective on callus formation and the best results of plant regeneration were obtained from combination of NAA 0.5mg/l and zeatin 0.5mg/l in anther culture. $NH_{4}NO_3$ as more effectives as the nitrogen source than $KNO_3$ and the combination with zeatin 2.0mg /L was the best effective. The best combination for plant regeneration in callus induced from anther was $NH_{4}NO_3$ 1650mg/l + $KNO_3$ 3800mg/l + zeatin 2.0mg/l. Ploidy level of anther-derived plants appeared 28% haploid, 47% diploid and the others were triploid, tetraploid and mixploid. In compare with E.S.T, M.D.H and P.X banding patterns were distinguished among callus, haploid and diploid plants in electrophoresis.

  • PDF

An historical analysis on the carbon lock-in of Korean electricity industry (한국 전력산업의 탄소고착에 대한 역사적 분석)

  • Chae, Yeoungjin;Roh, Keonki;Park, Jung-Gu
    • Journal of Energy Engineering
    • /
    • v.23 no.2
    • /
    • pp.125-148
    • /
    • 2014
  • This paper performs a historical analysis on the various factors contributing to the current carbon lock-in of Korean electricity industry by using techo-institutional complex. The possibilities of the industry's carbon lock-out toward more sustainable development are also investigated. It turns out that market, firm, consumer, and government factors are all responsible for the development of the carbon lock-in of Korean power industry; the Korean government consistently favoring large power plants based on the economy of scale; below-cost electricity tariff; inflation policy to suppress increases in power price; rapid demand growth in summer and winter seasons; rigidities of electricity tariff; and expansion of gas-fired and imported coal-fired large power plants. On the other hand, except for nuclear power generation and smart grid, environment laws and new and renewable energy laws are the other remaining factors contributing to the carbon lock-out. Considering three key points that Korea is an export-oriented economy, the generation mix is the most critical factor to decide the amounts of carbon emission in the power industry, and the share of industry and commercial power consumption is over 85%, it is unlikely that Korea will achieve the carbon lock-out of power industry in the near future. Therefore, there are needs for more integrated approaches from market, firm, consumer, and government all together in order to achieve the carbon lock-out in the electricity industry. Firstly, from the market perspective, it is necessary to persue more active new and renewable energy penetration and to guarantee consumer choices by mitigating the incumbent's monopoly power as in the OECD countries. Secondly, from the firm perspective, the promotion of distributed energy system is urgent, which includes new and renewable resources and demand resources. Thirdly, from the consumer perspective, more green choices in the power tariff and customer awareness on the carbon lock-out are needed. Lastly, the government shall urgently improve power planning frameworks to include the various externalities that were not properly reflected in the past such as environmental and social conflict costs.

Relationships of Physiological Activity and Anatomical Structure to the Wilting Phenomena in Rice Plant 2. Relationships between the anatomical structure and wilting phenomena of rice variety "Yushin" (수도품종의 위조현상과 생리 및 형태해부학적 구조와의 관련성에 관한 연구 제2보 유신벼의 위조현상발생과 형태해부학적 구조와의 관계)

  • Jong-Hoon Lee
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.25 no.2
    • /
    • pp.6-14
    • /
    • 1980
  • One of the physiological disease, sudden wiliting of Yushin variety suggested that low sunlight, excessive nitrogen application, and highly reduced soil condions either singly or combined, might be possible causes of the disorder. Some visual symptom of sudden wilting are discoloration of leaves, development of nodal roots above the soil surface, total root rot, and lodging. Those observations led to the hypothesis that suffocation of root tissues was a direct cause of the wilting. The oxygen transport characteristics of Yushin, IR262 and Tongil were examined by two methods. First, Soil-cultured plants of the three varieties were subjected to paraffin treatment to decrease the oxygen supply from the air to root tissues through the soil-water system, liquid paraffin was applied to the water surface in the pots at panicle formation stage. In this experiment, sudden wilting was observed of Yushin and IR262 at about a week after the treatment, but Tongil remained green and healthy. Wilting-resistant variety Tongil had higher oxygen release, whereas the susceptible Yushin and IR262 had lower oxygen release. Second, the number and size of the air spaces in each internode were investigated in the 5th internode from the top, all three varieties have a similar number of air spaces, although the air spaces of Thongil were larger. In the 4th internode, Tongil had plenty air spaces, Yushin and one of the Yushin's parents IR262 had scanty or none. The observations indicated that the ability of Yushin and IR262 for oxygen transport is very limited compared with that of Tongil. The limited oxygen supply due to poor development of air space in internode of rice plants may cause suffocation of root tissues, weaken metabolic activity of the tissues, and induce root rot, subsequently inducing sudden wilting and lodging under unfavorable weather, soil and cultural conditions.

  • PDF

Studies on the Chemical Constituents of the Tea Shoots in Native Tea Plant in Korea - Part 1. Total nitrogen, Ash, Water extract, Tannin, Caffeine and Vitamin C - (한국(韓國) 야생차(野生茶)의 성분(成分)에 관(關)한 연구(硏究) - 제1보. 전질소(全窒素), 회분(灰分), 가용분(可溶分), 탄닌, 카페인 및 비타민 C 에 관(關)하여 -)

  • Eun, Jong-Bang;Rhee, Chong-Ouk;Kim, Dong-Youn
    • Applied Biological Chemistry
    • /
    • v.28 no.3
    • /
    • pp.202-208
    • /
    • 1985
  • The significant chemical constituents estimating the quality of green tea were compared and analyzed in the tea shoots of native Korean tea plants. The tea shoots of different varieties among native tea plants were plucked in Waun-ri, Yongjang-ri, others in eight tea-growing places, and Yabukita, for the comparison, which is excellent Japanese variety. The contents of Yongjang-ri tea shoots were 0.55% lower in total nitrogen, 41.44mg% lower in vitamin C and 0.56% higher in tannin than the average of the other eight places. The contents of ash, caffeine and water extract showed no difference between the tea shoots. Tea shoots of Waunri had similar compositions compared with those of Yabukita and other eight places in the chemical constituents. It is considered that the tea loaves in Yongjang-ri would be different variety comparing with other eight places in the view of characters and constituents. And it is thought that tea loaves in Waun-ri would be the large leaf variety of same genealogy because tea loaves in Waun-ri was different from the other eight places in characters, but was similar to in constituents.

  • PDF

Design of Cloud-Based Data Analysis System for Culture Medium Management in Smart Greenhouses (스마트온실 배양액 관리를 위한 클라우드 기반 데이터 분석시스템 설계)

  • Heo, Jeong-Wook;Park, Kyeong-Hun;Lee, Jae-Su;Hong, Seung-Gil;Lee, Gong-In;Baek, Jeong-Hyun
    • Korean Journal of Environmental Agriculture
    • /
    • v.37 no.4
    • /
    • pp.251-259
    • /
    • 2018
  • BACKGROUND: Various culture media have been used for hydroponic cultures of horticultural plants under the smart greenhouses with natural and artificial light types. Management of the culture medium for the control of medium amounts and/or necessary components absorbed by plants during the cultivation period is performed with ICT (Information and Communication Technology) and/or IoT (Internet of Things) in a smart farm system. This study was conducted to develop the cloud-based data analysis system for effective management of culture medium applying to hydroponic culture and plant growth in smart greenhouses. METHODS AND RESULTS: Conventional inorganic Yamazaki and organic media derived from agricultural byproducts such as a immature fruit, leaf, or stem were used for hydroponic culture media. Component changes of the solutions according to the growth stage were monitored and plant growth was observed. Red and green lettuce seedlings (Lactuca sativa L.) which developed 2~3 true leaves were considered as plant materials. The seedlings were hydroponically grown in the smart greenhouse with fluorescent and light-emitting diodes (LEDs) lights of $150{\mu}mol/m^2/s$ light intensity for 35 days. Growth data of the seedlings were classified and stored to develop the relational database in the virtual machine which was generated from an open stack cloud system on the base of growth parameter. Relation of the plant growth and nutrient absorption pattern of 9 inorganic components inside the media during the cultivation period was investigated. The stored data associated with component changes and growth parameters were visualized on the web through the web framework and Node JS. CONCLUSION: Time-series changes of inorganic components in the culture media were observed. The increases of the unfolded leaves or fresh weight of the seedlings were mainly dependent on the macroelements such as a $NO_3-N$, and affected by the different inorganic and organic media. Though the data analysis system was developed, actual measurement data were offered by using the user smart device, and analysis and comparison of the data were visualized graphically in time series based on the cloud database. Agricultural management in data visualization and/or plant growth can be implemented by the data analysis system under whole agricultural sites regardless of various culture environmental changes.

Selection of Supplemental Light Source for Greenhouse Cultivation of Pepper during Low Radiation Period through Growth and Economic Analysis (생육 및 경제성 분석을 통한 약광기 고추의 온실재배를 위한 적정 보광 광원 선정)

  • Hwang, Hee Sung;Lee, Kwang Hui;Jeong, Hyeon Woo;Hwang, Seung Jae
    • Journal of Bio-Environment Control
    • /
    • v.31 no.3
    • /
    • pp.204-211
    • /
    • 2022
  • To produce a high quality crop, light is an essential environmental factor in greenhouse cultivation. In the winter season, solar radiation is weak than other season. Therefore, using supplemental light during a low radiation period can increase the crop growth and yield. This study was conducted to select the economical supplemental light source for greenhouse cultivation in pepper during the low radiation period. The green pepper (Capsicum annuum 'Super Cheongyang') was transplanted on 5 September 2019. Supplemental lighting treatment was conducted from 1 January 2020 to 31 March 2020. RB LED (red and blue LED, red:blue = 7:3), W LED (white LED, R:G:B = 5:3:2), and HPS (high-pressure sodium lamp) were used as the supplemental light source. Non-treatment was used as the control. The plant height, SPAD, and number of nodes of pepper plants have no significant differences by supplemental light sources. However, the number of ramifications plants was the greatest in RB LED light source. Moreover, supplemental lighting increased photosynthesis of the pepper plant, and especially, the RB LED had the highest photosynthesis rate during supplemental lighting period. Also, the yield of pepper increased in the supplemental lighting treatment than in the control, and the RB LED had the greatest yield than other light sources. The electricity consumption was the highest in W LED and the lowest in HPS light. Through the economic analysis, the RB LED had high economic efficiency. In conclusion, these results suggest that using RB LED for supplemental light source during low radiation in pepper greenhouse increase the yield and economic feasibility.

Development of Plant BIM Library according to Object Geometry and Attribute Information Guidelines (객체 형상 및 속성정보 지침에 따른 수목 BIM 라이브러리 개발)

  • Kim, Bok-Young
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.52 no.2
    • /
    • pp.51-63
    • /
    • 2024
  • While the government policy to fully adopt BIM in the construction sector is being implemented, the construction and utilization of landscape BIM models are facing challenges due to problems such as limitations in BIM authoring tools, difficulties in modeling natural materials, and a shortage in BIM content including libraries. In particular, plants, fundamental design elements in the field of landscape architecture, must be included in BIM models, yet they are often omitted during the modeling process, or necessary information is not included, which further compromises the quality of the BIM data. This study aimed to contribute to the construction and utilization of landscape BIM models by developing a plant library that complies with BIM standards and is applicable to the landscape industry. The plant library of trees and shrubs was developed in Revit by modeling 3D shapes and collecting attribute items. The geometric information is simplified to express the unique characteristics of each plant species at LOD200, LOD300, and LOD350 levels. The attribute information includes properties on plant species identification, such as species name, specifications, and quantity estimation, as well as ecological attributes and environmental performance information, totaling 24 items. The names of the files were given so that the hierarchy of an object in the landscape field could be revealed and the object name could classify the plant itself. Its usability was examined by building a landscape BIM model of an apartment complex. The result showed that the plant library facilitated the construction process of the landscape BIM model. It was also confirmed that the library was properly operated in the basic utilization of the BIM model, such as 2D documentation, quantity takeoff, and design review. However, the library lacked ground cover, and had limitations in those variables such as the environmental performance of plants because various databases for some materials have not yet been established. Further efforts are needed to develop BIM modeling tools, techniques, and various databases for natural materials. Moreover, entities and systems responsible for creating, managing, distributing, and disseminating BIM libraries must be established.

Studies on the Roadside Revegetation and Landscape Reconstruction Measures (도로녹화(道路綠化) 및 도로조경기술개발(道路造景技術開発)에 관(関)한 연구(硏究))

  • Woo, Bo Myeong;Son, Doo Sik
    • Journal of Korean Society of Forest Science
    • /
    • v.48 no.1
    • /
    • pp.1-24
    • /
    • 1980
  • One of the most important basic problems for developing the new techniques in the field of road landscape planting practices in Korea, is to clarify, analyse, and evaluate the existing technical level through actual field survey on the various kinds of planting techniques. This study is, therefore, aimed at the good grasp of detail essences of the existing level of road landscape planting techniques through field investigations of the executed sites. In this study, emphasized efforts are made to the detail analysis and systematic rearrangements of such main subjects as; 1) principles and functions of the road landscape planting techniques; 2) essential elements in planning of it; 3) advanced practices in execution of planting of it; 4) and improved methods in maintenance of plants and lands as an entire system of road landscape planting techniques. The road landscape planting techniques could be explained as the planting and landscaping practices to improve the road function through introduction of plants (green-environment) on and around the roads. The importances of these techniques have been recognized by the landscape architects and road engineers, and they also emphasize not on]y the establishment of road landscape features but also conservation of human's life environment by planting of suitable trees, shrubs, and other vegetations around the roads. It is essentially required to improve the present p]anting practices for establishment of the beautiful road landscape features, specially in planning, design, execution, establishment, and maintenance of plantings of the environmental conservation belts, roadside trees, footpathes, median strips, traffic islands, interchanges, rest areas, and including the adjoining route roads.

  • PDF