• 천문학회보
• /
• 제39권2호
• /
• pp.48.1-48.1
• /
• 2014

We investigate the evolution of galaxies in mid-infrared (MIR) $[3.4{\mu}m]-[12{\mu}m]$ color versus $12{\mu}$ luminosity diagram using Wide-field Infrared Survey Explorer data for member galaxies of the A2199 supercluster at $z{\simeq}0.03$. In the MIR color-luminosity diagram, we classify galaxies into three MIR classes: MIR blue cloud (massive, quiescent and mostly early-type), MIR star-forming sequence (mostly late-type), and MIR green valley galaxies. Both MIR green valley galaxies and MIR blue cloud galaxies are optically red sequence populations, and there is no significant difference in star formation rates and stellar masses between them. We compare cumulative distribution functions of surface galaxy number density and of cluster/group-centric distance between three MIR classes. However, when considering only early-type galaxies, the difference between MIR blue cloud galaxies and MIR green valley galaxies disappears. In contrast, the intermediate trend of MIR green valley galaxies is still found for late-type galaxies. We discuss our results concerning the difference of evolution between early- and late-type galaxies and the connection to environment.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.595-599
• /
• 2011

ALC(Autoclaved Lightweight Concrete) is produced using quartz sand, lime and cement and water. And aluminum powder is used for blowing agent. ALC is manufactured by autoclave chamber under high-temperature and high-pressure. Generally, ALC is 1/4 levels lighter than concrete and mortar, because it has a lot of pores. So density of ALC is about 0.45~0.65 g/$cm^3$. But, ALC has a weakness, typically low strength, with its porous structure. So, it is necessary to excellent strength properties for extensive apply of ALC materials in high porosity. In this study, melamine resin was used to improve the strength characteristics of ALC materials. We performed compressive and bending strength measurements. Compressive strength of ALC with 2% melamine resin increased 26.88% than 'melamine-free' ALC. Also we performed functionality evaluation such as thermal conductivity, sound absorption, and flame-resistance.

• 한국조경학회지
• /
• 제40권4호
• /
• pp.1-17
• /
• 2012

본 연구는 서울시 아파트단지의 시기별 녹지배치구조와 식재구조의 변화과정을 분석하여 보다 친환경적인 아파트단지 내 녹지조성 개선방안을 제시하고자 하였다. 연구대상지는 서울시에 조성된 아파트단지 중 조성시기, 용적률, 지하주차장에 의한 지반현황, 녹지율의 차이가 뚜렷한 아파트단지 12개소를 선정하였다. 연구대상지 유형화는 시기별로 녹지율과 지반현황을 기준으로 녹지율이 높은(40% 이상) 자연지반 아파트, 녹지율이 낮은(40% 미만) 자연지반 아파트, 녹지율이 낮은(40% 미만) 인공지반 아파트, 녹지율이 높은(40% 이상) 인공지반 아파트 네 가지로 구분하였다. 아파트단지 녹지배치 구조의 가장 근원적 변화요인은 녹지율과 인공지반 여부로 용적률이 상승하면서 주차장 면적비율도 높아져 상대적으로 녹지율은 낮아졌다. 녹지배치구조가 가장 많이 변한 녹지유형은 전면녹지와 완충녹지로 전면녹지는 녹지율이 높은 자연지반 아파트의 평균 녹지 폭 10.0m에서 3.5m, 2.7m, 4.5m로 시기별로 축소 변화하였다. 완충녹지는 녹지율이 높은 자연지반 아파트에서 평균 녹지 폭 15.0m로 단지외곽 경계부를 연결하였으나, 녹지율이 낮은 인공지반 아파트에서 주차장 확대로 평균 녹지 폭이 7.7m, 2.7m로 점차 축소되고 일부 구간은 단절되었으나, 2001년 이후 녹지에 대한 인식변화로 다시 평균 녹지 폭이 3.8m로 넓어지면서 연결되었다. 녹량 변화를 살펴보면, 녹지율이 높은 자연지반 아파트 녹지용적계수가 $1.27m^3/m^2$이었고, 식재밀도가 높아지면서 녹지율이 낮은 자연지반 아파트의 녹지용적계수가 $3.47m^3/m^2$로 가장 높았다. 반면에 녹지율이 높은 인공지반 아파트의 녹지용적계수는 $0.72m^3/m^2$로 매우 낮은 상태이었다. 식재밀도는 교목 아교목층의 경우 5.0주/$100m^2$에서 14.5주/$100m^2$로 증가하였다. 아파트단지 녹지를 보다 친환경적이고 기능적으로 조성하기 위한 방안으로 녹지율 40% 이상의 아파트단지 내 전면녹지는 녹지 폭 4.5m 이상으로 확대하여 정원개념의 경관 식재지로 조성하고, 후면녹지는 녹지 폭 5.0m이상으로 확대하고 복층구조로 식재하여 녹지량을 증진하는 것을 제시하였다. 측면녹지는 수고가 높은 수종을 식재하여 벽면 차폐와 녹음기능을 증진하고, 완충녹지는 자생수종을 자연림에 가까운 다층구조로 조성하는 생태적 배식기법을 적용하면서 단지내부녹지와 연결해야 할 것으로 판단되었다.

• 한국조경학회지
• /
• 제26권2호
• /
• pp.54-61
• /
• 1998

The subsurface environment of the root zone area can set the stae for "do or die" of the turfgrass plant. The good condition of the greens is verified by their physical properties. Therefore, this study was carried to evaluate on the existing green of Hwasan C.C. by undisturbed soil Core Anaysis. We completed the ISTRC SYSTEM BenchMarking of the undisturbed core samples taken from Green #1, Green #5, Green #9-"Best" area, and Green #9-"Stressed" area for the Hwasan C.C.. It was also our understanding that the greens were in "good" to "very good" conditioni. THe exception might be Green #9-"Stress" area, which was the stressed area. The stressed area was confined to a ridge across Green #9. The organic content test results comfirmed the development of organic layering in depth 0-2.5cm. For the amount of compaction in the upper root zones and te development of the green's respective organic layers, the infiltration rates were high in Green #1, Green #5, and Green #9 "Stressed" area. The depicted aerificaton hole might be the probable cause of the relatively high infiltraton rate. Green #9-"Best" area had a tested infiltration rate of 18.75cm/hr. Either this area had not been aerified, or the undisturbed sample did not contain a aerification cavity. The water retention capacity of the undisturbed samples was good. When the greens were first constructed, the original root zone mix had been relatively low water retention properties. And the bulk density and the porosity of the undisturbed samples were good. In the result, all the greens were similar except for the infiltration. Thus, we supposed that Green #9-"Stressed" area might be ainly influenced by the amount of irrigation water and the configuration of the green's surface. There had been a reduction in the amount of irrigation water as the water retention capacity in the greens was promoted. Especially, it had gradually become more of a problem as the green had matured in Green #9-"Stressed" area. Because Green #9-"Stressed" area was a ridge area. The reduction in the amount of irrigation water might be the probable cause of the stress in Green #9-"Stressed" area. Our final observation related to the soil texture and the particle size distribution of the sand. Though and sand contant of all the tested greens were good, the gravel content of them exceeded ISTRC Guidelines. In particle size distribution of the sand, the very coarse and the coarse content of all the tested greens exceeded, but the rest was insufficient. The stability is a function of the material retained on the 0.25mm mesh screen. But, the content of all the tested greens was very insufficient. Though all the greens was serviceable, the coarse root zone sands, such as the sand in the tested greens, tended to be "unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.;unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.ines.

• Environmental Engineering Research
• /
• 제16권1호
• /
• pp.29-34
• /
• 2011

The electric charge on a membrane was investigated by analyzing the experimental rejection of various monovalent and divalent ionic solutes. The characteristics of the separation of ionic solutes using various nanofiltration membranes were obtained from an experimental nanofiltration set-up, with a surface area of $40cm^2$ under the operational pressures between 0.25-0.3 MPa. The state of the membrane electric charge was observed using separation coefficients, i.e., the permeation ratio of monovalent to divalent ions. To confirm the state of the membrane charge observed via the separation coefficient, a calculation using the extended Nernst-Planck equation, coupled with the Donnan equilibrium, assuming different electric charge states of the membrane, was compared with the experimental rejection of ionic solutes. The examination of the characteristics of separation using three types of nanofiltration membranes showed that one of the membranes carried a negative/positive double charge density inside, while other two membranes carried either a positive or negative charge density.

• 한국환경복원기술학회지
• /
• 제14권1호
• /
• pp.77-88
• /
• 2011

This study was carried out to investigate the effects of soil depth and planting density on the growth of lettuce, crown daisy, and strawberry on a rooftop condition using artificial soil as a growth media. The vegetable crops showed better growth for plant height (cm), plant width (cm), plant fresh weight (g), and Fo, Fm and Fv/m on 20cm depth soil than 10cm depth soil except strawberry. Planting density of $16/m^2$ and $64/m^2$ did not show significant differences on the growth of the crops. Soil moisture content and EC were low for 10cm depth soil in lettuce plots, whereas there was no significant differences on soil moisture and EC between two soil depth in strawberry plots. Hunter's L, a, and b values showed the leaf color of lettuce dark green on 20cm depth soil and reddish on 10cm depth soil. Results showed that soil depth suitable for crop growth on rooftop conditions was 20cm rather than 10cm. Growth response of the crops showed no significant difference between $16/m^2$ and $64/m^2$, indicating that planting density of 64 $plants/m^2$ could be practiced on rooftop conditions. Lettuce growth rapidly changed in control treatment in which leaves were not pinched out, while slowly changed in plants which leaves were periodically pinched out. In the case of control plot, it was impossible to harvest because withering of lower leaves after blossom on June 22. The plant of crown daisy in which pinching was not conducted, blossomed on June 7, and the plants were removed since its aesthetical value was lost. Strawberry seemed to be a suitable vegetable crop for rooftop conditions based on its high covering rate and extended growth period until late October. The soil depth 20cm and planting density 64 $plants/m^2$ were suitable for vegetable crops on green roof system using artificial soil.

• 한국조경학회지
• /
• 제26권1호
• /
• pp.70-82
• /
• 1998

The purpose of this study was to propose the community planting method through analyzing the plant community structure of three green space types and the relationship of vegetation and wild bird inhabitation of urban environmental forest in Seoul, Korea. The results from this study showed that the vegetation stratification, coverage, and species diversity were closely related to the wild bird inhabitation. In addition, the environmental forest in study site was analyzed as a negative factor that may decrease the biodiversity. Therefore the ecological structure and environmental condition must be considered in order to improve the quality of environmental forest. Based on results in three green space types, the planting species, density and species size for proper community planting were proposed in this study. The ecological niche relationships among sixteen selected species were also presented. The results will be provided as an valueable output for the completed community planting of urban green space in the central region, Korea.

• Carbon letters
• /
• 제26권
• /
• pp.25-30
• /
• 2018

The dielectric medium used in electrophoretic displays (EPDs) is required to be an environmentally friendly solvent with high density, low viscosity, and a large electric constant. Hydrofluoroether, a highly fluorinated solvent with eco-friendly characteristics, is regarded as a viable alternative medium for EPDs, owing to the similarity of its physical properties to those of the conventional EPD medium. Surface modification of particles is required, however, in order for it to disperse in the charged solvent. Also, positive/negative charges should be present on the particle surface to enable electrophoretic behavior. In this study, carbon black particles wrapped with positively charged nitrogen (N-CBs) were fabricated by a simple hydrothermal process using a poly(diallyldimethylammonium chloride) solution as a black coloring agent for the EPD. The dispersion behavior of N-CBs was investigated in various solvents.

• Journal of the Korean Wood Science and Technology
• /
• 제37권5호
• /
• pp.459-464
• /
• 2009

This study was conducted to find the relationship between the moisture content and basic density of green lumber and the final moisture content of kiln dried lumber. The possibility of using a ultrasonic nondestructive testing technology was investigated. Four matched 2-foot long boards were kiln-dried for 12, 24, 36 and 48 hours. Twenty three slices were cut to examine the distribution of moisture content along the length. It was revealed that the green weight was a better estimator of the final moisture content of the kiln-dried board than the green moisture content. The standard deviations of the moisture contents of the slices were not correlated with the final moisture contents of the kiln-dried boards. The two ultrasonic devices used for this study were apparently good tools for NDT.

• 한국주조공학회지
• /
• 제31권4호
• /
• pp.186-190
• /
• 2011

A new Cu-Hf-Al-Be monolithic bulk amorphous alloy was developed utilizing minimal use of toxic and expensive Be. The developed alloy exhibits a large glass forming ability (GFA) (${\Phi}8$ mm). The possible mechanisms underlying the enhancement of the glass forming ability by this alloy are discussed based on the dimensionless parameter ${\gamma}$. In addition, alloy design strategy for the improvement of GFA is proposed in the viewpoint of heat of mixing (${\Delta}H_{mix}$)difference and atomic packing state.