• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.378-384
• /
• 1997

In curing process of tire, contact and slip occurs between green tire and curing bladder. The curing process is a critical step in the manufacture of tires. In this investigation, curing bladder shaping is examined using a finite element method. Specifically, a finite element model between the inner part of green tire and the outer part of curing bladder is generated using contact element and curing bladder is generated using incompressible element. Numerical analysis are performed on two different bladder types, different overall outer diameters of curing bladder and different heights of curing bladder. Numerical results show that contact pressure is increased by using toroidal type of curing bladder, increasing overall diameter and increasing height of curing bladder. To obtain natural equilibrium carcass line, there is a requirement in increasing contact pressure of the section between side and bead.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.300-305
• /
• 2010

Poly(ethylene terephthalate)(PET) tire cord has relatively lower adhesion properties caused by limited reacting sites. In order to improve the adhesion force between PET tire cord and rubber, an additional process to activate surface of PET has been employed. Atmospheric plasma was used to substitute the chemical finishing process of PET tire cord as a green dipping process. Contact angle was measured to confirm surface change of PET after plasma treatment. The treated PET tire cords with/without resorcinol-formaldehyde-latex(RFL) and unvulcanized rubber were vulcanized in a testing mold at $160^{\circ}C$. After atmospheric plasma treatment of PET tire cord, adhesion force was somewhat increased under some conditions.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.184-191
• /
• 1996

In curing Process of tire, Contact and slip occurs between green tire and curing bladder. The curing process is a critical step in the manufacture of tires. In this investigation, curing bladder shaping is examined using a finite element method. Specifically, a finite element model between the inner part of green tire and the outer part of curing bladder is generated using contact element and curing bladder is generated using incompressible element, The experimental tensile tests are used to get the material properties of bladder rubber on practical conditions. Numerical analyses are performed on two different bladder types, different overall outer diameters of curing bladder and different heights of curing bladder.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.632-635
• /
• 2007

Automobile tire has very complicated shape and is composed of rubber, steel cord and ply cord, Tread pattern of tire is very essential for the basic characteristics of tire, such as braking, acceleration and comfortableness. Tire components such as tread, sidewall, and spex are prepared by forcing uncured rubber compound through an extruder to shape during curing process. Because of its complexity of shape, adaptive mesh refinement was used for the analysis of tire tread. Effects of forming variables were evaluated.

• Elastomers and Composites
• /
• 제34권4호
• /
• pp.321-331
• /
• 1999

타이어 가황공정(curing process)은 타이어 제조를 위한 최종공정으로 여러 개의 고무배합물 층으로부터 성형된 그린타이어(green tire)를 가황기(mold)내에서 고압/고온 조건하에 유지시킴으로써 원하는 형상을 얻게 하고, 아울러 각 고무배합물이 고탄성을 갖도록 물성을 변화시키는 공정이다. 본 연구에서는 타이어 품질의 향상을 위해 가황공정을 수치적으로 최적화하는 기법을 개발하였다. 먼저, 가황공정 중 가황매체(cure media)의 최적공급 조건을 경정하기 위해 제약조건을 갖는 동적최적화문제(dynamic constrained optimization problem)로 정형화하였다. 즉, 가황기 내의 전열 및 가황 반응 현상을 묘사하는 공정모델로 표현되는 등위제약조건(equality constraint)과 가황매체가 갖는 온도의 한계를 표현하는 부등위제약조건(Inequality constraint) 아래 목적함수를 최적화 시켰다. 다음, 공급되는 가황매체의 최적조건을 결정하기 위해 구성된 최적화문제를 유한요소법(FEM)과 complex 알고리즘을 적용하여 풀었다.

• Computers and Concrete
• /
• 제10권2호
• /
• pp.95-104
• /
• 2012

This study uses recycled green building materials based on a Taiwan-made recycled mineral admixture (including fly ash, slag, glass sand and rubber powder) as replacements for fine aggregates in concrete and tests the properties of the resulting mixtures. Fine aggregate contents of 5% and 10% were replaced by waste LCD glass sand and waste tire rubber powder, respectively. According to ACI concrete-mixture design, the above materials were mixed into lightweight aggregate concrete at a constant water-to-binder ratio (W/B = 0.4). Hardening (mechanical), non-destructive and durability tests were then performed at curing ages of 7, 28, 56 and 91 days and the engineering properties were studied. The results of these experiments showed that, although they vary with the type of recycling green building material added, the slumps of these admixtures meet design requirements. Lightweight aggregate yields better hardened properties than normal-weight concrete, indicating that green building materials can be successfully applied in lightweight aggregate concrete, enabling an increase in the use of green building materials, the improved utilization of waste resources, and environmental protection. In addition to representing an important part of a "sustainable cycle of development", green building materials represent a beneficial reutilization of waste resources.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.173-178
• /
• 2008

This is green roof bottom system which composed by aluminum valve and glass fiber together as major reinforcement, so the cooper sheet can have root proof, and using recycled tire gel-type membrane waterproofing system which dost not contains VOCs. The copper sheet reduce the plants' root growing, so it helpes to maintain the waterproofing layer and stability of root proofing. Gel type membrane waterproofing system can do waterproofing, stress dispersion, and reducing leakage expansion. So those two materials can help each other to make green roof bottom layer would have the stability and durability.

• 자원리싸이클링
• /
• 제22권2호
• /
• pp.11-17
• /
• 2013

폐타이어를 열분해하여 오일을 회수하는 공정에서 배출되는 다량의 탄소 잔류물을 활용하는 기술은 환경과 경제성 측면에서 매우 중요하다. 본 연구에서는 폐타이어 열분해 과정에서 배출되는 탄소 잔류물을 활용하여 활성탄으로 재활용이 가능한지 파악하고자 하였다. 이를 위해서 폐타이어 열분해 상용화 공정에서 발생하는 탄소 잔류물의 특성을 분석하였다. 아울러 탄소 잔류물을 $600^{\circ}C$와 $800^{\circ}C$에서 1시간 탄화 한 후, $950^{\circ}C$에서 3시간 활성화하여 기공특성 변화를 살펴보았다. 탄소잔류물의 비표면적은 $8.0m^2/g$이었으나, 탄화와 활성화 과정을 거치면서 비표면적이 $548.3m^2/g$로 급격히 증가함을 확인할 수 있었다.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.232-243
• /
• 2009

근래 고성능 친환경 타이어의 개발요구에 의하여 경제성(낮은 회전 저항)과 안전성(wet traction) 및 내마모성면에서 균형있는 특성을 가지는 타이어 트레드 고무의 합성 제조 기술이 중요하게 대두된다. 이를 위하여 다양한 기능성 용액중합 SBR의 개발과 함께 고무/충전제 간의 상호작용 증진 기술이 학술적으로나 산업적으로 활용되고 있다. 본 고에서는 기존의 카본블랙 고무와 함께 최근 green tire로서 각광 받는 실리카 충전 고무에서 충전제와 상호반응이 가능한 화학적 변성 SBR과 커플링제를 이용한 고성능 타이어 트레드 고무의 합성 제조 기술에 대하여 최근 연구 방향과 함께 작용 메카니즘에 대하여 고찰하였다.

• 한국환경과학회지
• /
• 제32권9호
• /
• pp.627-634
• /
• 2023

Tire wear particles(TWPs), regarded as a microplastic, is generated in significant quantities each year and exist in various spaces and have a negative impact on the surrounding environment. Particularly, roadside environments fall within the direct influence of TWPs, necessitating proactive investigation for contamination management and response. Therefore, this study aimed to investigate the soil acidity and electrical conductivity(EC) and TWPs in the roadside soil of six sites based on traffic volume. The analysis revealed that the soil in all sites exhibited subacidity, and there were no significant differences in EC. Microscopic and FT-IR analysis revealed the presence of microscopic particles in soil samples that exhibited common visual characteristics of TWPs. In the road with the highest traffic volume, 48,300 TWPs were detected per unit area. Furthermore, a proportional relationship between traffic volume and TWPs particles was established. However, influences other than traffic volume on TWPs particle count within the soil were observed. Therefore, for the management of TWPs contaminated roadside soil, a proactive response is necessary in areas with high traffic volumes. However, in order to effectively address the factors contributing to the generation and dispersion of TWPs, further research is required with a multidimensional approach.