• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1050-1053
• /
• 2006

We fabricated white organic light emitting diodes consisting of three emitting layers of red-emitting DCM2 doped ${\alpha}-NPD$, blue-emitting DPVBi and green-emitting C545T doped Alq3. By optimizing the thickness of the hole-transport layer of ${\alpha}-NPD$ and the electron-transport layer of Alq3, efficient white OLEDs were obtained with a luminous efficiency of 4.40lm/W at luminance of $1000cd/m^2$, and a max-imum luminance of $51,939cd/m^2$

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.107-111
• /
• 2013

A new green-emitting material with donor-acceptor architecture, 3,7-bis(1'-phenylbenzimidazole-2'-yl)-10-phenylphenothiazine (BBPP) was synthesized and its thermal, optical, and electroluminescent characteristics were investigated. Organic light-emitting diodes (OLEDs) with four different multilayer structures were prepared using BBPP as an emitting layer. The optimized device with the structure of [ITO/2-TNATA (40 nm)/BBPP (30 nm)/TPBi (30 nm)/Alq3 (10 nm)/LiF (1 nm)/Al (100 nm)] exhibited efficient green emission. Enhanced charge carrier balance and electron mobility in the organic layers enabled the device to demonstrate a maximum luminance of 31,300 cd/$m^2$, a luminous efficiency of 6.83 cd/A, and an external quantum efficiency of 1.62% with the CIE 1931 chromaticity coordinates of (0.21, 0.53) at a current density of 100 mA/$cm^2$.

• 청정기술
• /
• 제18권4호
• /
• pp.366-372
• /
• 2012

펜던트기가 tris(8-hydroxyquinoline) aluminum ($AlQ_3$)으로 된 아크릴 단량체(HEMA-p-$AlQ_3$) (HEMA = 2-hydroxyethyl methacrylate)를 각각 메틸메타크릴레이트(MMA), 아크릴로니트릴(AN), 순수 HEMA와 공중합하여 3가지 아크릴 공중합체[MMA-co-HEMA-p-$AlQ_3$ (공중합체 1), AN-co-HEMA-p-$AlQ_3$ (공중합체 2), HEMA-co-HEMA-p-$AlQ_3$ (공중합체 3)]를 라디칼 공중합법으로 합성하였다. 25 wt%의 HEMA-p-$AlQ_3$를 함유한 공중합체 1,2,3의 유리전이온도($T_g$)는 각각 158, 150, $126^{\circ}C$로 나타났으며, 이는 유기발광다이오드(organic light emitting diodes, OLED)로써 지녀야 하는 우수한 열 안정성을 만족하였다. 그리고 이들 공중합체는 테트라하이드로퓨린, 디메틸포름아미드, 톨루엔 및 클로로포름 등과 같은 용매에 잘 용해되었으며, 자외선-가시광선의 흡수 및 발광 거동이 순수 $AlQ_3$와 거의 동일함을 알 수 있었다. 또한 이들 공중합체를 스핀 코팅하여 녹색의 OLED 디바이스를 제조한 후 전류 밀도-전압 곡선을 비교하였다. 공중합체 3을 사용한 OLED 디바이스의 on-set 전압은 약 2 볼트로써 다른 두 공중합체 OLED 디바이스의 전압(공중합체 1: 약 3 볼트, 공중합체 2: 약 4 볼트) 보다 낮음을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.313-314
• /
• 2005

Organic light emitting diodes(OLEDs) are widely used as one of the information display techniques. We synthesized (1,10-phenanthroline)- (8-hydroxyquinoline) [Zn(Phen)q]. We studied the improvement of OLEDs properties using Zn(phen)q. The Ionization Potential(IP) and the Electron Affinity(EA) of Zn(phen)q investigated using cyclic voltammetry(CV). The IP, EA and Eg were 7.leV, 3.4eV and 3.7eV, respectively. The PL spectrum of Zn(phen)q was yellowish green as the wavelength of 535nm. In this study, we used Zn(phen)q as electron transporting layer(ETL) inserted between emitting layer(EML) and cathode. As a result, Zn(phen)q is useful as electron transporting layer to enhance the performance of OLEDs.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.179-198
• /
• 2004

Organic electroluminescent devices are light-emitting diodes in which the active materials consist entirely of organic materials. Recently, many fluorescent organic materials have been reported and the study on synthesis and application of new organic light-emitting materials has been demanded. This paper reports the optical and electrical characteristics of OLEDs using novel polymers containing biphenyl structure. First, Optical properties of novel light-emitting biphenyl derivatives doped with poly(9-vinyl carbazole)(PVK) and emitted blue, bluish green color, which is attributed to the overlap area between PL spectrum of host(PVK) and absorption spectra of guests(polymer). This is correspondent with F$\"{o}$rster energy transfer process in the blends. And, OLED devices were fabricated using poly (3,4-ethylenedioxy thiophene) (PEDOT) as a hole injection material and tris-(8-hydroxyquinoline) aluminum ($Alq_3$) as an electron transporting material. EL devices fabricated as ITO/PEDOT/PVK doped with biphenyl derivatives/$Alq_3$/Li:Al and I-V-L chatacteristics and emitting efficiency of EL devices were examined. Finally, the drift mobility of PVK doped with biphenyl derivatives and $Alq_3$ were measured by TOF technique varying applied electric field. EL efficiency was increased as the ratio of hole mobility of PVK doped with biphenyl derivatives and electron mobility of $Alq_3$ was close to one.

• ETRI Journal
• /
• 제43권6호
• /
• pp.1093-1102
• /
• 2021

Microdisplays based on organic light-emitting diodes (OLEDs) have a small form factor, and this can be a great advantage when applied to augmented reality and virtual reality devices. In addition, a high-resolution microdisplay of 3000 ppi or more can be achieved when applying a white OLED structure and a color filter. However, low luminance is the weakness of an OLED-based microdisplay as compared with other microdisplay technologies. By applying a tandem structure consisting of two separate emission layers, the efficiency of the OLED device is increased, and higher luminance can be achieved. The efficiency and white spectrum of the OLED device are affected by the position of the emitting layer in the tandem structure and calculated via optical simulation. Each white OLED device with optimized efficiency is fabricated according to the position of the emitting layer, and red, green, and blue spectrum and efficiency are confirmed after passing through color filters. The optimized white OLED device with color filters reaches 97.8% of the National Television Standards Committee standard.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.281-281
• /
• 2009

Electrical analysis of red, green and blue (RGB) organic light emitting diode (OLED), which were measured at various temperatures from 230K to 370K by steps of 20K, were investigated using current-voltage(I-V) characteristics. Ideality factor and series resistance were obtained from the thermionic emission theory. Experimental results showed that the ideality factors were 2.12 for red, 3.80 for green, and 6.03 for blue OLED at 290K, respectively. The series resistance were 1960, 2190, 2630$\Omega$ for red, green and blue OLED at the same temperature. It was found that the OLED ideality factors were much higher than near unity for well-behaved silicon diodes, because of the organic material and multi-layer fabrication diode. In addition, the series resistance was near 2k$\Omega$ range. More researches are required to reduce both ideality factors and series resistance to increase the efficiency of OLEDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.503-505
• /
• 2008

A host material containing tetraphenylsilane, 9-(4-triphenylsilanyl-(1,1'4,1")-terphenyl-4"-yl)-9H-cabazole (TSTC), was synthesized for green phosphorescent organic emitting diodes. $Ir(ppy)_3$ based OLEDs using TSTC host and DTBT (2,4-diphenyl-6-(4'yl)-1,3,5-triazine) hole blocking layer (HBL) showed the maximum external quantum efficiency of 19.8 %, the power efficiency of 59.4 lm and high operational stability with a half lifetime of 160,000 h at an initial luminance of $100\;cd/m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.780-783
• /
• 2002

We report very efficient white OLEDs consisting of a blue-emitting 4,4'bis[N-(1-napthyl)-N-phenyl-amino]-biphenyl (${\alpha}$-NPD), a hole-blocking layer of 2,9-dimethyl-4, 7-diphenyl-1, 10-phenanthroline (BCP) doped with red fluorescent dye of 4-dicyanomethylene-2-methyl-6-[2-(2,3,6,7-tetrahydro- 1H, 5H-benzo[i,j]quinolizin-8-yl) vinyl]-4H-pyran) (DCM2), and green-emitting tris(8-hydroxyquinoline) aluminum ($Alq_3$). The device with the structure of ITO/${\alpha}$-NPD (50 nm)/BCP:DCM2 (0.8 %, 4 nm)/$Alq_3$ (50 nm)/LiF (0.5 nm)/Al shows a white emission with the CIE coordinates (0.329, 0.333). The maximum luminance of 20,800 cd/$m^2$ is obtained at 15.4 V. The power efficiency is 2.6lm/W and the external quantum efficiency is 2.1 % at a luminance of 100 cd/$m^2$ at the bias voltage of 6 V.

• 한국진공학회지
• /
• 제19권3호
• /
• pp.184-189
• /
• 2010

두 가지의 형광도판트를 이용하여 제작된 단일 발광층 유기발광다이오드(OLEDs)는 ITO / NPB ($700{\AA}$) / MADN : C545T - 1.0% : DCJTB - 0.3% ($300{\AA}$) / Bphen ($300{\AA}$>) / LiF ($10{\AA}$) / Al ($1,000{\AA}$)으로 구성되었다. C545T와 DCJTB는 각각 녹색과 적색 도판트로 사용되었고, 호스트 물질인 MADN에 대해서 각각 다른 농도로 도핑하였다. 이러한 두 가지 형광도 판트를 사용한 제적화된 OLED는 8.42 cd/A의 효율과 6 V에서 $3169 cd/m^2$의 발광 휘도와 (0.43, 0.50)의 색좌표를 가졌다. 이러한 OLED 구조의 electroluminescence는 각각 C545T와 DCJTB에 따라 500 nm와 564 nm의 피크를 가졌다. 이러한 결과는 MADN에서 C545T로 C545T에서 DCJTB로 포스터 에너지 전이가 일어났음을 설명할 수 있다.