• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.471.2-471.2
• /
• 2014

We demonstrate here that an improvement in precursor film density (green density) leads to a great enhancement in the photovoltaic performance of CuInSe2 (CISe) thin film solar cells fabricated with Cu-In nanoparticle precursor films via chemical solution deposition. A cold-isostatic pressing (CIP) technique was applied to uniformly compress the precursor film over the entire surface (measuring 3~4 cm2) and was found to increase its relative density (particle packing density) by ca. 20%, which resulted in an appreciable improvement in the microstructural features of the sintered CISe film in terms of lower porosity, reduced grain boundaries, and a more uniform surface morphology. The low-bandgap (Eg=1.0 eV) CISe PV devices with the CIP-treated film exhibited greatly enhanced open-circuit voltage (VOC, from 0.265 V to 0.413 V) and fill factor (FF, from 0.34 to 0.55), as compared to the control devices. As a consequence, an almost 3-fold increase in the average power conversion efficiency, 3.0 to 8.2% (with the highest value of 9.02%), was realized without an anti-reflection coating. A diode analysis revealed that the enhanced VOC and FF were essentially attributed to the reduced reverse saturation current density (j0) and diode ideality factor (n). This is associated with the suppressed recombination, likely due to the reduction in recombination sites such as grain/air surfaces (pores), inter-granular interfaces, and defective CISe/CdS junctions in the CIP-treated device. From the temperature dependences of VOC, it was confirmed that the CIP-treated devices suffer less from interface recombination.

• 농업과학연구
• /
• 제45권4호
• /
• pp.839-845
• /
• 2018

As a solution to the rural shortage of labor, mechanization crop production is necessary, but in some cases, the mechanization can cause problems such as a decrease in products due to the expansion of the necessary moderate workspace. The purpose of this study was to compare the yields of pepper by the planting-density for the mechanization of pepper cultivation. Experiments were done with three planting-density levels of $900{\times}300mm^2$(A-T), $1200{\times}450mm^2$(B-T), and $1500{\times}600mm^2$(C-T). In the analysis of growth, the highest values in plant height and thickness and the number of branches were observed with the B-T. C-T showed the highest values in the number of green-pepper and red-pepper and weight of the green-pepper and red-pepper, followed by B-T and A-T. In the analysis of growth, it was concluded that the proportion of the pepper body to the total length increased as the planting-density decreased. C-T had the biggest maximum diameter of the body, followed by B-T and A-T. On the other hand, A-T had the biggest minimum diameter of the body, followed by B-T and C-T. It was judged that the larger the planting-density was, the shorter the length was and the thicker the form was. As a result of measuring the chromaticity, there was no significant statistical difference in quality. Based on the experiment results, the ranking in total yields was in the order of C-T, B-T, and A-T. The reduced planting-density seemed to increase the productivity, while the labor intensity and time were reduced due to the improvement of the working environment.

• 한국지리정보학회지
• /
• 제26권2호
• /
• pp.42-54
• /
• 2023

우리나라 대도시 지역에 인구가 집중되고 이에 따른 수요를 충족시키기 위하여 저밀도 주거지가 재개발·재건축을 통하여 고밀도 주거지화 되고 있다. 그러나 단시간에 이루어진 대규모의 재건축은 도시녹지 면적 감소에 의한 열섬현상을 발생시키는 등 도시 기후에 부정적인 영향을 끼치게 된다. 본 연구에서는 Landsat 8 위성영상을 활용하여 서울특별시 강동구 고덕동, 둔촌동 재건축 지역의 2013년에서 2022년까지의 지표 온도의 변화를 분석하였다. 고덕동 지역에서는 재건축이 진행되는 대상지와 산림지역, 산림과 시가지가 혼재된 지역, 저층주거지역에 대한 지표 온도의 차이를 분석하였으며, 둔촌동 지역에서는 대상지와 산림지역, 저층주거지역에 대한 지표 온도의 차이를 분석하였다. 분석은 지표 온도 차이에 대한 다중회귀분석을 통하여 진행되었다. 고덕동 지역과 둔촌동 지역에서 공통적으로 재건축 전단계까지 전반적으로 지표 온도가 산림보다 높고 저층주거지역보다 낮게 나타났다. 이러한 특징들은 고덕동, 둔촌동의 저층주거지역이 대상지보다 녹지율이 낮고 건폐율이 높기 때문에 발생하였음을 알 수 있다. 본 연구를 통해 저밀도 지역이 고밀도화가 되더라도 녹지와 건폐율을 적절하게 관리한다면 도시열섬현상을 완화시킬 수 있음을 알 수 있다.

• 아시안잔디학회지
• /
• 제12권3호
• /
• pp.225-236
• /
• 1998

골프장 잔디를 가해하는 토양중의 굼벵이류 종류와 밀도등을 알아보기 위하여 7개도 2개 광역시 15개 골프장을 대상으로 조사한 결과 12종의 굼벵이류가 채집되었는데, 등얼룩풍뎅이(Anomala orientalis) 등 8속 11종은 동정이 되었고, 1종은 동정이 되지 않았다. 골프장에 따라서는 다양한 종구성을 보여 주었는데 등얼룩풍뎅이 유충의 피해가 가장 심하였다. 6곳의 골프장에서 주둥무늬차색풍뎅이(Adoretus tenuimaculatus)가 채집되어 일반적으로 널리 분포하고 있던 종이었으며, 밤색우단풍뎅이(Maladera castanea)는 5곳의 골프장에서 등얼룩풍뎅이, 검정풍뎅이(Holotrichia kiotoensis), 애우단풍뎅이(M. orientalis) 등도 4곳의 골프장에서 채집되었다. 한편, 3개 지역 골프장의 tee, fairway, green별 굼벵이류 종류와 밀도, 분포 깊이등을 월동기와 비월동기에 조사하였던 바, 월동기에는 등얼룩풍뎅이가 비월동기에는 주둥무늬차색풍뎅이가 우점종이었으며 굼벵이 밀도는 green이 tee나 fairway보다 낮았다. 분포 깊이는 동래골프장과 대구골프장에서는 계절별로 차이가 있었으나 진해 용원골프장에서는 차이가 없었다. 잔디종에 따른 가해 굼벵이의 종류는 차이가 없었다. 그러나 대엽고려지(Zoysia matrella)에서는 주둥무늬차색풍뎅이의 밀도가 높았고, 켄터키블루그라스(Poa pratensis)에서는 등얼룩풍뎅이의 밀도가 높았다. 그리고 골프장의 년수가 오래될수록 등얼록풍뎅이 유충의 밀도가 높았지만 분포하는 굼벵이류의 종류에는 차이가 없었다.

• 한국환경생태학회지
• /
• 제31권2호
• /
• pp.252-265
• /
• 2017

본 연구에서는 고밀 시가화지역 내 녹지들의 경관생태학적 특성과 연결성을 분석함으로써 잠재적인 녹지패치들의 활용가능성을 평가하고, 이를 통해 생활권 내 녹지 네트워크를 형성하기 위한 도시정원의 도입 방안을 제시하고자 한다. 이를 위해, 서울시에서 공원 서비스 소외지역 및 중점녹화지구로 분류된 역삼동 일대를 대상지로 선정하였다. 우선, 대상지 일대 고밀 시가화지역 내 녹지의 현황을 가로녹지, 개인정원, 자투리공지, 공원, 옥상정원의 5개 항목으로 분류하여 파악하고, 녹지 네트워크 분석 및 잠재적 녹지의 가치를 평가하기 위하여 FRAGSTATS를 통한 경관지수 분석 및 다중버퍼생성분석을 통한 연결성평가를 실시하였다. 연구결과, 대상지 내 녹지면적은 가로녹지, 개인정원, 자투리공지, 공원, 옥상정원의 순으로 분포되어 있었다. 녹지의 유형별 특징으로는 가로녹지의 경우 핵심지역면적(TCA)이 $1,618m^2$로 가장 높은 값을 보여 선형 연결 녹지임에도 공원($1,128m^2$)에 상응하는 크기를 보였고, 개인정원의 경우 패치의 모양이 불규칙하면서도(ED=78.1m/ha), 최근린 평균거리가 33.9m로 낮아 사유지내에서의 자유로운 정원조성을 통해 고밀 시가화지역의 녹지군을 형성할 수 있음을 나타내었다. 자투리공지의 경우 대상지 내 가장 고루 분포하는(LPI=5.7%, SHEI=0.9) 녹지유형이나 외부교란에 노출되어 있어($TCA=66m^2$), 이를 고려한 정원으로의 활용방안을 시사하였다. 대상지 내 녹지네트워크 형성에 있어서도 50m의 버퍼 범위를 연결녹지로 상정한 경우 전체 대상지의 84%가 소규모 녹지네트워크에 의해 커버되는 것으로 나타났으며, 자투리공지의 연결만으로도(27%) 가로녹지(26%) 조성에 상응하는 네트워크 구축효과가 기대되었다. 이에, 주택지역을 중심으로 다양한 활동이 가능한 자투리 공공녹지에 지역기반의 커뮤니티 가든 등 도시정원 조성을 장려하고, 가로녹지, 개인정원, 옥상정원도 동시에 적극 활용함으로써 고밀 시가화지역 내에 녹지네트워크를 효과적으로 구축할 수 있다고 판단되었다.

• Animal cells and systems
• /
• 제2권2호
• /
• pp.217-222
• /
• 1998

Green peach aphid, Myzus persicae(Sulzer) (Homoptera: Aphididae), interacts with many predatory insects in potato fields during the summer. The concept of the predator complex associated with green peach aphids was applied to explain the interactions between the aphid and its predators. The predator power of the predator complex was determined by two factors: the number of predators and the relative feeding capacity. The dynamics of the green peach aphid population was expressed by the number of individuals while the predator power was used to characterize the predator complex. Cumulative degree-days for green peach aphids were used as a time scale to analyze phonology and dynamics patterns of the aphid and its predator complex. The patterns of population changes in aphids were similar during the period of study(1993-1995) although the highest density of aphids fluctuated significantly from year to year. However, the predator power appeared more stable than the green peach aphid population over the three year period. The results indicated that the predator complex plays an important role to suppress the aphid populations during the latter part of the season and that the applications of control measures for green peach aphids in between the initiation and the peak timing of aphid populations are critical to minimize the damage on potatoes.

• 한국전기전자재료학회논문지
• /
• 제28권2호
• /
• pp.142-147
• /
• 2015

The artificial light sources for growth of plant are usually high-pressure sodium lamp, metal haloids lamp, and fluorescent light; however, these light sources have relatively weaker Red and Blue lights that are necessary for growth of plants. Especially the effect of Photosynthetic Photon Flux Density (PPFD) is pointed out as the weakness. Meanwhile, LED light source can be selected by specific wavelength to greatly improve the effect of PPFD. In this regard, this paper aims to investigate the promotion of plant growth by measuring photosynthetic photon flux density (hereafter referred to as PPFD) according to changes in light quality of the LED light sources. Towards this end, LED light sources for plant growth were produced with 4 kinds of mono-chromatic lights and 6 kinds of combined lights by mixing red, blue, green and white lights. A comparative analysis was conducted to investigate the effects of optical properties and PPFD on plants (green leaf lettuce) using the produced light sources. The results monochromatic light has fastest growth rate, but plant growth conditions have poor. This being so, mixed light is suitable for the green leaf lettuce.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.13-17
• /
• 1997

The densification of $Al_2$O$_3$/15v/o ZrO$_2$ (Zirconia Toughened Alumina: ZTA) to the 99% of theoretical density was attempted by controlling the processing parameters affecting the each processing step i.e., milling, spray-drying, forming and pressureless sintering. The ZTA processed under the identical conditions showed a large variation in the green and sintered densities, and the mechanical properties. The deviation of 4-point bending strength was more than 100MPa for the ZTA with ~99% of theoretical density. Moreover, the relative green and sintered densities were deviated greatly from the average value. This low reproducibility could be caused by the variation of spray-dried granule properties. Thus, the effect of yield strength and morphology of spray-dried ZTA granule on the green and sintered densities and the mechanical properties needs to be studied in detail. The objective of this work is to fine out the optimum condition of compaction pressure and compaction method depending on the properties of spray-dried granules.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권2호
• /
• pp.326-354
• /
• 2014

In this paper, a new green clustering algorithm is proposed to be as a first approach in the framework of an energy efficient strategy for centralized enterprise high-density WLANs. Traditionally, in order to maintain the network coverage, all the APs within the WLAN have to be powered-on. Nevertheless, the new algorithm can power-off a large proportion of APs while the coverage is maintained as its always-on counterpart. The two main components of the new approach are the faster procedure based on K-means and the more accurate procedure based on Evolutionary Algorithm (EA), respectively. The two procedures are processes in parallel for different designed requirements and there is information interaction in between. In order to implement the new algorithm, EA is applied to handle the optimization of multiple objectives. Moreover, we adapt the method for selection and recombination, and then introduce a new operator for mutation. This paper also presents simulations in scenarios modeled with ray-tracing method and FDTD technique, and the results show that about 67% to 90% of energy consumption can be saved while it is able to maintain the original network coverage during periods when few users are online or the traffic load is low.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.365-371
• /
• 2016

Cell performance of the Zn-Br redox flow battery (ZBRFB) using two different type's membrane (Nafion117 and SF-600) was evaluated at $20mA/cm^2$ of current density in 1M (mol/L) $ZnBr_2$ + 2M KCl + 0.3M EMPBr(1-ethyl-1-methyl pyrrolidinium bromide) electrolyte. The average energy efficiencies of ZBRFB were 74.9% and 74.7% for Nafion117 and SF-600, respectively. The electrolyte added the 1-ethyl-3-methylimidazolium dicyanamide (EMICA) as an additive was tested for the electrolyte in ZBRFB using SF-600 at $30mA/cm^2$ of current density. An average energy efficiency of the ZBRFB was 74.5% and 77.4% for the electrolyte non-added EMICA and added 1wt% of EMICA, respectively. ZBRFB using the electrolyte added EMICA was showed the higher performance than that using the electrolyte non-added EMICA.