• KIEAE Journal
• /
• 제12권6호
• /
• pp.85-92
• /
• 2012

The Korean government has introduced building regulations with improved energy conservation measures, including higher insulation levels for building envelope. However, there are many existing buildings that tend to consume more energy for heating and cooling than new buildings, as they were built under the former regulations with relatively higher U-values of walls and glazing. In order to improve energy efficiency in existing buildings, green remodelling of building envelope and building services are required. For existing buildings, building services improvements have been achieved through energy service company(ESCO), but much attention has not been paid to building envelope improvements with various reasons, such as uncertainty of energy saving effect design issues and costs. The aim of this study is to evaluate the impact of building envelope improvements in a typical commercial building on its heating and cooling energy loads. The results show that the improvement of glazing with lower U-values has the highest energy saving effects, followed by wall, roof and floor, under the condition of same level of insulation improvements. However, high insulated glazing increased LCC because of higher initial investment costs.

• 한국BIM학회 논문집
• /
• 제5권4호
• /
• pp.53-62
• /
• 2015

Korea has been at the forefront of green growth initiatives. In 2008, the government declared the new vision toward 'low-carbon society and green growth'. The government subsidies and Feed-in Tariff (FIT) increased domestic usage of solar power by supplying photovoltaic housing and photovoltaic generation systems. Since 2000, solar power industry has been the world's fastest growing source with the annual growth rate of 52.5%. Especially, BIPV(Building Integrated Photovoltaic) systems are capturing a growing portion of the renewable energy market due to several reasons. BIPV consists of photovoltaic cells and modules integrated into the building envelope such as a roof or facades. By avoiding the cost of conventional materials, the incremental cost of photovoltaics is reduced and its life-cycle cost is improved. When it comes to atypical building, numerous problems occur because PV modules are flat, stationary, and have its orientation determined by building surface. However, previous studies mainly focused on improving installations of solar PV technologies on ground and rooftop photovoltaic array and developing prediction model to estimate the amount of produced electricity. Consequently, this paper discusses the problem during a planning and design stage of BIPV systems and suggests the method to select optimal design of the systems by applying the national strategy and economic policies. Furthermore, the paper aims to develop BIM tool based on the engineering knowledge from experts in order for non-specialists to design photovoltaic generation systems easily.

• 한국환경복원기술학회지
• /
• 제3권4호
• /
• pp.1-10
• /
• 2000

This study aims at the new design system development of landscape architecture structures, as soundproof wall using reinforced soil block. This structures, that is new soundproof wall system, have to be maintained stability on acting critical wind load, which is combined exist soundproof wall system and soundproof wall system using environmental green stone block. To the harmony of this system, the post block, so-called landscape block or cast block, is manufactured. It's possible to stand of the post bearing system combined with post-pile and post block. Through the comparison with a serious code for the acting wind load on the soundproof wall, the reasonable wind load could be calculated. Also, the mechanical stability on the green stone block was checked by the Lab. tests based on the UBC (Uniformed Building Code). Because the critical height of soundproof wall system using green stone generally was restricted, the new system demands to combination of the exist system and the new system. For the stability analysis of them, the utility program, SAP2000, was used. And, a semi-auto program on the design system of the new soundproof wall using green stone was developed, which can be easily use because of the simplification.

• 한국가구학회지
• /
• 제25권2호
• /
• pp.148-153
• /
• 2014

Importance of energy consumptions has being emphasized because of problems of the energy and environment. So, recently, green wall systems have been installed to reduce building energy consumptions. The green wall systems provide several benefits; they make it possible to maintain moderate thermal comforts by greenery. Greening such a surface wall in the building by plants, the temperature of the wall can be properly controlled that purifies the air and improves the view spanning over the space. This study evaluated the effects of green wall systems on reducing room temperature quantitatively, changing of humidity, decreasing of $CO_2$. Test results were confirmed; first, the space installed by green walls showed that temperature and $CO_2$ decreased and humidity was increased. Second, two structures were compared with the solar radiation, and green wall systems controlled the temperature and humidity stably near the wall regardless of the amount solar radiation. In conclusion, the green wall systems can contribute to thermal comforts and indoor air quality in the buildings.

• 한국태양에너지학회 논문집
• /
• 제23권2호
• /
• pp.9-19
• /
• 2003

This study aims to propose Green Remodelling methods of apartment houses in Korea. Through the literature review and case studies various 'Green' Remodelling elements including environmental friendly technologies were identified and classified. Design strategies and remodeling techniques which could increase energy efficiency, reduce water and resource use, improve air qualify, improve landscape management, and improve maintenance were also investigated. Then, 'Green remodelling' methods of apartment houses are proposed as the des19n methodology of remodeling for sustainable development. The green Remodeling design methods and elements proposed by this study are proved to be simple, easy and flexible ways to enhance the environmental sustainability of the existing building.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.11-12
• /
• 2015

Green Frame is a Rahmen structure made of composite precast concrete members. According to the concrete design code, a lower rebar of precast concrete girder, should be extended to the inner precast concrete column. However, such extension of lower rebar may sharply reduce its constructability. To satisfy the criteria, the connection and anchorage of beam rebar should be taken into consideration, yet it is difficult to use lapping as it is not easy to ensure enough space when Green Frame method is adopted. To solve this, a new method of lower rebar connection and anchorage was developed, and this study is intended to review economic feasibility prior to applying the method developed onto sites. The study result can be used as basic data for selection of the optimal joint and anchorage method for lower rebar of the green frame construction.

• 건축사
• /
• 통권516호
• /
• pp.13-13
• /
• 2012

• 한국지열·수열에너지학회논문집
• /
• 제16권1호
• /
• pp.17-25
• /
• 2020

Ground-coupled heat pump (GCHP) systems have become an efficient alternative to conventional cooling and heating methods due to their higher energy using efficiency. Although some experimental and simulation works related to performance analysis of GCHP systems for commercial buildings have been done, relatively little has been reported on the performance evaluation of GCHP systems for school buildings. The purpose of this simulation study is to evaluate the performance of a hypothetical GCHP system for a school building in Seoul. We collected various data of building specifications and construction materials for the building and then modeled to calculate hourly building loads with SketchuUp and TRNSYS V17. In addition, we used GLD (Ground Loop Design) V2016, a GCHP system design and simulation software, to design the GCHP system for the building and to simulate temperature of circulating water in ground heat exchanger. The variation of entering source temperature (EST) into the system was calculated with different prediction time and then each result was compared. For 20 years of prediction time, EST for baseline design (Case A) based on the hourly simulation results were outranged from the design criteria.

• 한국주거학회논문집
• /
• 제26권1호
• /
• pp.1-10
• /
• 2015

In line with the recent public concern on the environmental issues in building industry, there has been a rise in demand for a healthy, sustainable housing environment in South Korea. In order to achieve a healthy environment in residential buildings, considerable efforts have been made in a wide range of sectors. Among others, the development of the certification schemes to promote environment-friendly planning and building construction is remarkable. In urban South Korea, recently built houses tend to be significantly high-rise, high-density buildings. Global warming has brought about drastic climate change and continued to increase the average annual temperature year by year. These changes should be well reflected on the government's implementation of the building environmental assessment system. For guidance, therefore, this study looks to the case of Hong Kong which is well known for high-density housing development and subtropical climate conditions. It compares the features of the green building certification schemes for newly developed multifamily housing in two regions, namely HK-BEAM in Hong Kong and G-SEED in South Korea. Based on the findings, it argues that the G-SEED implementor should have expanded roles in providing training programs and follow-up services in collaboration with the certification authorities. It is also argued that G-SEED professionals should be involved in the early stages of design processes, and training programs and licence systems to produce green building professionals should be developed. Finally, it points out that the assessment indicators should be more detailed and diversified.

• 한국건축친환경설비학회 논문집
• /
• 제12권6호
• /
• pp.655-668
• /
• 2018

This paper analyzes the applicability and technology level of the green building element technology by analyzing the scorecard of the LEED Canada certified buildings. The results of this analysis will be able to evaluate the current status and level of application of green building element technology, and it will be used as a basic data to prepare for the revision of the certification standards and the establishment of strategies for the future green building activation. In this study, 1,010 LEED Canada certified buildings from 2011 to 2016 were analyzed. The results were analyzed by focusing on the status of greening by certification category and the characteristics of adoption by sub-category. The results of the study are summarized as follows. (1) EA category showed the biggest difference between the certification scores and the adoption rates than other categories, and it was confirmed that it is not easy category from the viewpoint of practical adoption. On the other hand, the ID (Innovation & Design Process) and WE were analyzed to be relatively easy to apply, with a score of over 72%. (2) In the case of Platinum class, the upper adoption rate is shown in all categories except MR. The Gold class shows the adoption rate of WE and ID in the top, and the middle rate in most categories. Silver grades showed lower rates in the three categories except WE, ID and EQ. Certified grades showed the adoption rates of the bottom except the two categories.