• Korean Journal of Veterinary Research
• /
• v.37 no.3
• /
• pp.463-469
• /
• 1997

This study was performed to investigate the gross anatomical features and microscopical structures of the hemal nodes and the hemolymph nodes in the water deer (Hydropotes inermis) found in Kangwon-do, Korea. The hemal nodes and hemolymph nodes were observed mainly in the periphery of the thoracic and abdominal aortae of the animals. The size of hemal nodes was generally smaller than that of the hemolymph nodes, and the shape of the both organs was spherical or ovoid. The color of the hemal nodes was red or black while that of the hemolymph nodes was gray with red bands. The hemal nodes were surrounded by a thin connective tissue capsule and there were extensive subcapsular and deep sinuses distended by a great number of erythrocytes. Although a few number of lymphatic nodules and small areas of diffuse lymphatic tissues were observed in the parenchyma, no typical cortex and medulla were defined in the hemal node. Small numbers of blood vessels were found at the connective tissue capsule but lymph vessel was not observed microscopically in this organ. The hemolymph nodes were covered by a relatively thick connective tissue capsule and there was a hilus in each node. The parenchyma was divided into cortex and medulla. The cortex was composed of a few numbers of lymphatic nodules and some diffuse lymphatic tissues. The medulla comprised medullary sinus and cords. Afferent and efferent lymph vessels were observed at the periphery of the capsule and the hilus, respectively. The subcapsular and medullary sinuses were not extensive but filled with small numbers of erythrocytes. The stroma of hemal node and hemolymph node was composed of reticular cells and fibers, and the capsule and trabecula consisted of collagenous fibers with smooth muscle fibers.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.136-136
• /
• 2021

In this study, a deep convolutional neural network (DCNN) model is proposed for short-term precipitation forecasting using weather radar-based images. The DCNN model is a combination of convolutional neural networks, autoencoder neural networks, and U-net architecture. The weather radar-based image data used here are retrieved from competition for rainfall forecasting in Korea (AI Contest for Rainfall Prediction of Hydroelectric Dam Using Public Data), organized by Dacon under the sponsorship of the Korean Water Resources Association in October 2020. This data is collected from rainy events during the rainy season (April - October) from 2010 to 2017. These images have undergone a preprocessing step to convert from weather radar data to grayscale image data before they are exploited for the competition. Accordingly, each of these gray images covers a spatial dimension of 120×120 pixels and has a corresponding temporal resolution of 10 minutes. Here, each pixel corresponds to a grid of size 4km×4km. The DCNN model is designed in this study to provide 10-minute predictive images in advance. Then, precipitation information can be obtained from these forecast images through empirical conversion formulas. Model performance is assessed by comparing the Score index, which is defined based on the ratio of MAE (mean absolute error) to CSI (critical success index) values. The competition results have demonstrated the impressive performance of the DCNN model, where the Score value is 0.530 compared to the best value from the competition of 0.500, ranking 16^th out of 463 participating teams. This study's findings exhibit the potential of applying the DCNN model to short-term rainfall prediction using weather radar-based images. As a result, this model can be applied to other areas with different spatiotemporal resolutions.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.542-547
• /
• 2001

A non-intrusive Planar Laser-Induced Fluorescence(PLIF) technique was applied to study the turbulent mixing process in a Rushton turbine reactor. Instantaneous and ensemble averaged concentration fields are obtained by measuring the fluorescence intensity of Rhodamine B tracer excited by a thin Nd:Yag laser sheet illuminating the whole center plane of the stirred tank. The gray level images captured by a 14-bit cooled CCD camera can be transformed to the local concentration values using a calibration matrix. The dye injection point was selected at the tank wall with three quarter height (3/4H) from the tank bottom to observe the mixing characteristics in upper bulk flow region. There exist distinct two time scales: the rapid decay of mean concentration in each region after the dye infusion reflects the large scale mixing while the followed slow decay reveals the small scale mixing. The temporal change of concentration probability functions conjectures the two sequential processes in the batch type mixing. An inactive column of water existed above the impeller disk, in which the fluid rotates with the shaft but is isolated from the mean bulk flow.

• Journal of the Korean Society of Costume
• /
• v.50 no.7
• /
• pp.33-46
• /
• 2000

Uniform is the dress of distinctive design or fashion worn by members of a particular group or serving as a means of identification. The postman's uniform of Ministry of Communication should be distinctive or characteristic clothing to provide high functionality and symbolization of job characteristics, cost effectiveness and esthetic. In order to design the postman's new uniform available in 2000, there has been a satisfaction survey to 1,116 postmen. A thorough analysis of survey and informal and face-to-face discussion with postmen give the direction of design concept. One of the most important things in the design concept is to make the uniform high quality & refinement. The style is a refined jumper suit in consideration of form stability, wearing satisfaction, convenience in activity. The basic colors selected are navy and medium gray. The colors of jumper are MOC red ; C.I color Green : a representative color of youth, white : a symbolic color of bright future. All three colors are plaid on a basic nary color. In the selection of the textile, synthetic fiber (Polyester 65%, rayon 35%) equipped with UV cutting as well as water resistance etc. was recommended. In the uniform design process, the effective communication with user (postman) is critical to find the requirements and needs of uniform user (postman). Also. the uniform designer should reflect the above four key factors in design development. Therefore, the uniform should provide the user with high job performance and job pride in wearing the uniform.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.8
• /
• pp.1145-1152
• /
• 2002

A non-intrusive Planar Laser-Induced Fluorescence(PLIF) technique was applied to study the turbulent mixing process in a Rushton turbine reactor. Instantaneous and ensemble averaged concentration fields was obtained by measuring the fluorescence intensity of Rhodamine B tracer excited by a thin Nd:Yag laser sheet illuminating the whole center plane of the stirred tank. The gray level images captured by a 14-bit cooled CCD camera could be transformed to the local concentration values using a calibration matrix. The dye injection point was selected at the tank wall with three quarter. height (3/4H) from the tank bottom to observe the mixing characteristics in upper bulk flow region. There exist distinct two time scales: the rapid decay of mean concentration after the dye infusion reflects the large scale turbulent mixing while the fellowed slow decay reveals the small scale molecular mixing. The temporal change of concentration variance field conjectures the two sequential processes for the batch type mixing. An inactive column of water is existed above the impeller disk, in which the fluid rotates with the shaft but is isolated from the mean bulk flow.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.4
• /
• pp.442-446
• /
• 2009

This study was undertaken to isolate and to identify a fungal pathogen Colletotrichum sp. KV-21 associated with apple anthracnose. Rotted Gala apples were used for the isolation of the fungus. The infected tissues were sterilized with 70% ethanol, washed with sterilized distilled water and were transferred to 50 ml containing potato broth (PDB) flasks. The peripheral hyphae of the fungal colony which developed from the infected tissues were isolated on to potato dextrose agar (PDA). On PDA plates the fungus grew well at $25^{\circ}C$ and occupied more than half of a 9 cm petri dish within 5 days. The fungal cultures on PDA were used for morphological observation and identification of the fungus. Conidiophores were produced on the gray to whitish sporodochial structures scattered on PDA plates which gave rise to conidiogenous cells. The structures of the conidia produced on PDA plates were subcylindrical to obovoid, fusoid, tapered and 4 to $6\;{\mu}m$ in size.

• Archives of design research
• /
• v.20
• /
• pp.211-217
• /
• 1997

Natural dyes don't pollute the environments in contrast to artifical dyes. The cloths dyed with natural material can be developed into insect-proof clothing and bedding. With natural tint, they can also produce natural images. The purpose of this paper is to show the way to develop the natural dye material easily available at cheap cost, to produce high value added products in terms of dyeing a wide range of colors by using this material, and to suggest the way for farmers to cultivate the onions in their idle land, thus gaining additidnal income. In the process of dyeing natural cloth with onion skin produced largely in Mooan, Chonnam, we were able to extract a wide spectrum of colours from yellow to pale brown and gray. Having reaped good results in the various endurance tests(of washing, friction, water, sweat, sunlight), this material is estimated to be highly worthy of industrialization.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.1
• /
• pp.21-27
• /
• 2000

In order to investigate the changes of rice qualities during 4 years storage of paddy in warehouse of normal temperature condition. As storage period go by, head ratio was deduced and broken rice was increased according as a change of temperature during the long term storage. A color of rice was became more dark gray than that of entering time as L value was decreased from 64.07 to 61.62 a 4 years late. As a results of studies on the cooking quality of milled rice, water uptake ratio and expanded volume were increased in proporation to storage period, wherease total solids and iodine blue value were decreased. In the characteristic of texture of cooked rice, viscosity/hardness ratio(-H/H) had a decreasing tendency, while adhesiveness and cohesiveness increased with increased storage time. The qualities of cooked milled rice studied were sensory attributies of odor, taste, stickiness and appearance which were evaluvated by multiple comparsion method. The sensory results showed that all of descriptions were deterirated with a increased storage period. The taste and stickiness were changed from good score to bad score a 2 years later.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.3
• /
• pp.250-254
• /
• 2006

Hetero-junction sheet actuator composed of carbon nanotubes and $V_{2}O_5$ nanowires were demonstrated in a bimetal configuration. The successive filtration of $V_{2}O_5$ nanowire solution followed by carbon nanotube dispersed water solution in the same way produced a dark-gray colored sheet. A significant actuation was observed in sodium chloride electrolyte solution with a bending direction to the carbon nanotube side at the positive bias voltage against the copper counter-electrode. As the frequency of the applied voltage increased, the amplitudes decreased, indicating a rather slow response of the hetero-film actuator in the electrolyte solution. The hybrid structure enabled an easy fabrication of the film actuator with the enhanced efficiencies.

• Journal of radiological science and technology
• /
• v.42 no.6
• /
• pp.441-446
• /
• 2019

The purpose of this paper is to recognize the usefulness of the Phantom produced with 3D printing technology by reproducing the original phantom with 3D printing technology. Using CT, we obtained information from the original phantom. The acquired file was printed by the SLA method of ABS materials. For inspection, SPECT/CT was used to obtain images. We filled the both Phantom with a solution mixed with ^99mTcO4 1 mCi in 1 liter of water and acq uired images in accordance with the standard protocol. Using Image J, the SNR for each slice of the image was obtained. As a reference images, AC images were used. For the analysis of acquired images, ROI was set in the White mater and Gray mater sections of each image, and the average Intensity Value within the ROI were compared. According to the results of this study, 3D printed phantom's SNR is about 0.1 higher than the conventional phantom. And the ratio of Intensity Value was shown in the original 1 : 3.4, and the printed phantom was shown to be 1 : 3.2. Therefore, if Calibration Value is applied, It is assumed that it can be used as an alternative to the original.