• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.553-554
• /
• 2007

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.2.2-2.2
• /
• 2011

In this talk, the general concept of roll-to-roll printing technologies will be introduced with basic fundamentals of ink formulations for printing electronic devices as the first part of the talk. As the second part, based on the R2R printing process, key factors for printing TFTs, IC, PV and display would be presented using the information from the case study of R2R gravure and offset.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.19-24
• /
• 2012

We demonstrate the desert beetle back mimicking hybrid superhydrophilic/superhydrophobic patterned surface by using the combination method of colloidal lithography and gravure offset printing for nano and micro patterning, respectively. The two methods are cost-effective and industrially available techniques compared to the other nano/micro patterning methods. To verify the water collecting function of the hybrid surface, the water condensation behavior is investigated on the chilled surface in ambient temperature and high humidity. Due to the synergetic effect of drop and film wise condensation, the hybrid superhydrophobic/superhydrophilic surface shows the higher efficiency than one of single wettability surfaces. The work is underway to get the good patterns of hybrid surfaces for water collecting from the dew or fog.

• 한국산업보건학회지
• /
• 제19권3호
• /
• pp.270-279
• /
• 2009

In order to check a necessity of health control for the laborers who are in use of mixed organic solvents in the printing industries, this study evaluated the use status of mixed organic solvents, health subjective symptoms on the exposure of the solvents, health hazard for each kind of printings for the employees who work for the printing industries located in Seoul and Gyeonggi. The study analyzed 228 sites and 311 people responded of the total 250 sites surveyed from March to September 2007, and obtained the following results; 1) Estimating the exposure of the mixed organic solvents, the study found that estimation of mixture(EM) was different for each kind of printings at a level of significance, excessiveness of EM was 7.5%, the highest, for gravure printing, 5.6% for screen printing, 4.7% for master printing, 2.9% for offset printing. 2) As to the mean scores of health subjective symptoms for each kind of printings, workers in screen printing showed high scores in every subjective symptom, of which symptom of central nervous system was 3.75, the highest, and the difference was statistically at a level of significance(p<0.01). 3) Results of the hazard analysis for carcinogens and non-carcinogens contained in the mixed organic solvents exposed to the workers showed that cancer risk of offset printing workers was $7.8{\times}10^{-9}$ for benzene, the mean cancer risk was $2.02.{\times}10^{-8}$ from Monte-Carlo simulation, and both risks did not exceed the US EPA permissible standard of $1{\times}10^{-6}$. The total hazard indices of the non-carcinogens estimated was 3.523, the highest, for gravure printing, 2.381 for master printing, 1.125 for screen printing, respectively, and all exceeded 1.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.665-666
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.967-968
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.669-670
• /
• 2011

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1144-1149
• /
• 2008

Converting technology has developed to print information for the decades. Recently, this technology (like gravure, gravure-offset) is rising as an alternative way for mass production of printed electronics such as RFID, solar cell. For the width of printing line is under 10 microns, registration error should be minimized less than several microns. Tension disturbance is main cause of registration error and this should be minimized before the substrate is transported into printing zone. With PI controller, it is possible to suppress the disturbance within 2% of operating tension. But register error appears more than 10 micron using PIcontroller considering noise. So LQG controller is needed as an alternative control method. In this paper, the comparision of PI and LQG controller in the converting machine including measured noise and tension disturbance is presented. It is shown that the LQG controller is more suitable for precision tension control in printed electronics.

• 한국정밀공학회지
• /
• 제24권8호통권197호
• /
• pp.74-80
• /
• 2007

The distortion of printed pattern is frequently observed in gravure offset printing process, which can be a serious problem in printing process for printed electronics. The mechanism of pattern distortion is studied and the factors which affect the amount and shape of distortion are found using FEM. The amount and shape of distortion is influenced by material properties of the roller, thickness of roller, applied load, and so on. As the printing pressure increases and Possion ratio increases, the degree of the image distortion increases. And the increase of the thickness of rubber roller brings a large distortion of image, too. In some cases, the distortion of printed pattern can reach a few hundred micromillimeters. The comparison of the experiment result and the simulation result shows good agreement in their quantitative tendency.

• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.89-100
• /
• 2003

We have reviewed the method for surface tension of printing inks. Most of the methods fir for the low viscosity inks and solvents for inks. However, the inks for the offset lithography and intaglio should have high viscosity and high tack. The elongation of the ink filaments has more effect on the measuring surface tension than the energy of the surface molecules. In this paper, we propose the elongation method to estimate the surface tension of high viscosity printing inks. Even though we could measure the surface tension for low viscosity inks such as gravure and screen, elongation method could more useful to estimate the surface tension of lithography and intaglio inks than any other methods.