• 펄프종이기술
• /
• 제32권4호
• /
• pp.41-48
• /
• 2000

The main objective of this study was to investigate the packing state and optical properties of coated paper prepared with different coating colors by varying the blending ratio of such pigment as clay, $CaCO_3$, and plastic pigment. To evaluate the effect of packing state of pigment on the properties of coated paper, the coating thickness, which was theoretically calculated by specific gravity, and packing volume of pigment were used. It was found that there exists close relationship between the coating thickness and surface property of coated paper. For instance, the macro roughness(smoothness) of coated paper is closely related to bulkiness. Plastic pigments used in this research has a high finishing efficiency on the light weight coatings. Especially, hollow sphere pigment was very effective for improving the property of coated paper produced in this test. And when HSP was blended with $CaCO_3$the surface property such as smoothness and gloss improved significantly.

• Geomechanics and Engineering
• /
• 제37권3호
• /
• pp.253-262
• /
• 2024

Dynamic properties are pivotal in soil analysis, yet their experimental determination is hampered by complex methodologies and the need for costly equipment. This study aims to predict dynamic soil properties using static properties that are relatively easier to obtain, employing machine learning techniques. The static properties considered include soil cohesion, friction angle, water content, specific gravity, and compressional strength. In contrast, the dynamic properties of interest are the velocities of compressional and shear waves. Data for this study are sourced from 26 boreholes, as detailed in a geotechnical investigation report database, comprising a total of 130 data points. An importance analysis, grounded in the random forest algorithm, is conducted to evaluate the significance of each dynamic property. This analysis informs the prediction of dynamic properties, prioritizing those static properties identified as most influential. The efficacy of these predictions is quantified using the coefficient of determination, which indicated exceptionally high reliability, with values reaching 0.99 in both training and testing phases when all input properties are considered. The conventional method is used for predicting dynamic properties through Standard Penetration Test (SPT) and compared the outcomes with this technique. The error ratio has decreased by approximately 0.95, thereby validating its reliability. This research marks a significant advancement in the indirect estimation of the relationship between static and dynamic soil properties through the application of machine learning techniques.

• 지질공학
• /
• 제26권4호
• /
• pp.593-600
• /
• 2016

본 연구에서는 국내의 107개 터널 설계 과정에서 수행한 현장 및 실내시험 자료 4,280개를 이용하여 암반 및 무결암의 역학적 특성을 암종 및 강도별로 분석하였다. 분석된 물리 및 역학적 특성은 단위중량, 점착력, 내부마찰각, 변형계수, 탄성계수, 포아송비, 일축압축강도, 인장강도, 투수계수, 비중이다. 평균값의 분석 결과에 의하면 편마암은 비중, 화강암은 투수계수, 퇴적암은 단위중량과 점착력, 내부마찰각, 화산암은 변형계수와 탄성계수, 일축압축강도, 인장강도, 변성암은 포아송비에서 가장 높은 값을 보인다. 역학적 특성의 분포 범위는 암종 및 강도를 고려한 분석에도 불구하고 넓게 분포하며, 이는 암반의 불균질성과 이방성에 기인하는 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.29-38
• /
• 1997

The effect and control of wood property of reconstituted composite panels for improved board properties by wood-waste materials and development of combination method for heterogeneous materials have been of interest to the wood science researchers. The purpose of this study is to consider the properties in relation to hot pressing conditions and to develope the optimum hot pressing condition with waste wood and waste tire for the manufacturing of composite boards. The study of composite boards for recycling of wood and waste tire is nothing up to the present. Physical and mechanical properties such as specific gravity, moisture content, swelling coefficient, modulus of rupture and modulus of elasticity in bending test were studied. The condition of 3-stage press time for the lowest moisture content of composite board was $4{\rightarrow}3{\rightarrow}3$ minutes. Specific gravity of composite panels was affected mainly by the amount of rubber chip. Because of the low rigidity and high elasticity in rubber chip, it is considered the composite panel was adequate material in the place of compression load, but not bending load. Therefore, it was concluded that a use of rubber-based wood composite panel is proper to the interior materials such as floor a room than exterior materials. From the test results, the most optimum hot pressing conditions were $4{\rightarrow}3{\rightarrow}3$ minutes for 3-stage press time and $45{\rightarrow}20{\rightarrow}5kg/cm^2$ for 3-stage press pressure. The rubber-based wood composite panel was very excellent in elasticity by combination of rubber chip in comparison with existing other wood-based materials. Therefore, it was considered that rubber-based wood composites can be applicable to every interior materials such as floor a room and will be expected to effective reuse and recycle of waste tires and wood-waste materials, and will be contribute to protection of environment pollution in earth.

• 한국주조공학회지
• /
• 제10권4호
• /
• pp.316-323
• /
• 1990

To improve free-cutting property, fine Pb, Bi particles is necessary to be distributed evenly in Al-Cu alloy. The control of added element size and distribution are very difficult because of the insolubility and gravity segregation of Pb, Bi in the matrix. Therefore, in this study, mechanical stirring of the melt, inert gasbubbling, the addition of degasser are used for the fine distribution of Pb, Bi particles. The best distribution are obtained by stirring with 500 rpm for 10min., Ar gas bubbling with 600cc/min for 5min. and degassing with 0.8wt% degasser. As increasing cooling rate, fine grain size and finely dispersed particles were observed. The optimum pouring temperature was $650^{\circ}C$.

• 한국가구학회지
• /
• 제11권2호
• /
• pp.25-35
• /
• 2000

This study was carried out to investigate the wood properties for development the proper uses of lesser-known tree species. The tested species are Tamiang(Hydnocarpus woodii) Bangelem (Strombosia zeylanica) and Kamasulan(Anisophyllea ferruginea) grown in Indonesia. fundamental wood properties such as anatomical, physical and chemical properties and characteristics related to wood processing were examined. The results are summarized as follows : These species are diffuse porous, interlocked grained and coarse textured wood. Exceptionally, texture of Tamiang is fine. The heartwoods of these species are not distinguished clearly to the sapwoods. These species have high specific gravity, high shrinkage, and excellent strength properties. However, Tamiang has moderate specific gravity. Sawing characteristics are poor for these species except Tamiang. Sawing characteristics is moderate for Tamiang. Drying characteristics are moderate for Tamiang and Bangelem, and Poor for Kamasulan. The surfacing characteristics by planer are moderate f3r all these species. Bending property and durability are poor. Ash content is low in Bangelem.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.613-620
• /
• 2002

Sand Compaction Pile(SCP) is a soil improvement method that a sand charge is introduced into the pipe, and the pipe is withdrawn part away while the sand pile is compacted and its diameter is enlarged. The sand used in this method should be of good quality. In Korea, crushed stone and washed sea sand are used frequently in SCP. However, use of these materials is restricted because of environmental problem and deficiency of supply. In the copper smelting process, about 0.7 million tons of copper slag are produced in Korea. The range of particle size distribution of copper slag is from 0.15mm to 5mm, so it can be a substitute for sand, and the relatively high specific gravity compared with the sand, is its characteristic. Copper slag is hyaline and so stable environmentally that in foreign country, such as Japan, Germany etc., it is widely used in harbor, revetment and offshore structure construction works. Therefore, in this study, the several laboratory tests were peformed to evaluate the applicability of copper slag as a substitute for sand of SCP. From the mechanical property test, the characteristics of sand and copper slag were compared and analyzed, and from laboratory model test, the strength of composite ground was compared and analyzed by monitoring the stress and ground settlement of clay, SCP and copper slag compaction pile. Specially, this study focused on the application of copper slag as sand substitute in SCP pilot tests based on laboratory tests results.

• Journal of the Korean Wood Science and Technology
• /
• 제31권3호
• /
• pp.42-49
• /
• 2003

The objective of this research was to investigate the possibility of using rice husk flour as a partial substitute for the wood particles used as the raw material for manufacturing particleboards, by examining the physical and mechanical properties of the rice husk flour-wood particleboard as a function of the type of urea-formaldehyde resin used. Commercial wood particles and two types of rice husk flours (A type (30 ㎛), B type (300 ㎛)) were used. E₁ and E₂ class urea-formaldehyde resin was used as the composite binder, combined with 10 wt.% NH₄Cl solution as a hardener. Rice husk flour-wood particleboards with dimensions of 27×27×0.7 (cm) were manufactured at a specific gravity of 0.7 with rice husk flour contents of 0, 5, 10, and 15 (wt.%). We examined the physical properties (specific gravity and moisture content), mechanical properties (three point bending strength and internal bonding) of the composite. In general, it can be concluded that composites made from rice husk flours are of somewhat poorer quality than those made from wood; however, blending in small amounts of rice husk flour (e.g., 5% to 10% by weight) may have no significant impact on quality.

• 감성과학
• /
• 제7권4호
• /
• pp.19-24
• /
• 2004

본 연구의 목적은 관절계 댐핑특성을 상용 에르고미터(BIODEX)의 등속운동을 이용하여 파악할 수 있는지를 평가하는 것이다. 제안된 방법은 등속운동을 유지하기 위해 인가한 외부토크와 하퇴의 관성토크의 차로부터 슬관절의 댐핑토크를 계산하는 것이다. 댐핑토크는 여러 가지 관절각속도에서 산출되었고, 이로부터 댐핑특성을 유도하였다. 실험장치는 BIODEX 시스템과 별도의 힘센서 및 Labview 시스템으로 구성되었다. 댐핑특성의 해석에는 Matlab을 사용하였다. 실험결과로부터 등속운동의 기동 및 종료를 위한 크랭크 암의 가속 및 감속으로 인한 미세한 각속도의 변화가 댐핑토크의 영향보다 큰 관성토크를 유발하는 것을 알 수 있었다. 따라서, 현재의 등속운동장비로는 댐핑특성을 추정하기가 어렵다고 보여진다.

• 접착 및 계면
• /
• 제17권4호
• /
• pp.131-135
• /
• 2016

본 연구에서는 고상압출을 통하여 제조된 폴리프로필렌/탈크 복합재료의 배향 전후의 비중과 기계적 물성을 조사하였다. 탈크 충진제의 함량이 증가할수록 복합재료의 비중이 증가하였는데, 배향에 따라 발생된 미세공극으로 인해 배향된 복합재료의 비중은 배향되지 않은 복합 재료에 비해 작은 것으로 나타났다. 미배향 시료일 경우 탈크의 함량이 10중량%일 때 인장물성이 증가하였으나 탈크의 함량이 더 증가하면 인장물성은 감소하였다. 배향 시료 경우, 중량% 증가에 따라 인장 물성은 단조 감소를 보였다. Halpin-Tsai 식에 의해 이론적으로 분석한 결과 10중량% 첨가 때는 이론식에 잘 맞았으나 20중량% 이상일 때는 탈크 함량의 증가에 따라 이론식에서 벗어나는 정도가 더 커졌다. 굴곡강도 경우, 미배향 시료 와 배향 시료 모두 탈크의 함량이 10중량%일 때 최대 굴곡 강도 및 굴곡 탄성률을 보였다.