• Journal of Welding and Joining
• /
• 제28권3호
• /
• pp.49-58
• /
• 2010

Various alloy system, such as Cu-Sn-Ti, Cu-Ag-Ti, and Ni-B-Cr-based alloy are used for the brazing of diamond grits. However, the problem of the adhesion strength between the diamond grits and the brazed alloy is presented. The adhesion strength between the diamond grits and the melting filler alloy is predicted by the contact angle, thereby, instead of diamond grit, the study on the wettability between the graphite and the brazing alloy has been indirectly executed. In this study, Cu-13Sn-12Ti filler alloy was manufactured, and the contact angles, the shear strengths and the interfacial area between the graphites (diamond grits) and braze matrix were investigated. The contact angle was decreased on increasing holding time and temperature. The results of shear strength of the graphite joints brazed filler alloys were observed that the joints applied Cu-13Sn-12Ti alloy at brazing temperature $940^{\circ}C$ was very sound condition indicating the shear tensile value of 23.8 MPa because of existing the widest carbide(TiC) reaction layers. The micrograph of wettability of the diamond grit brazed filler alloys were observed that the brazement applied Cu-13Sn-12Ti alloy at brazing temperature $990^{\circ}C$ was very sound condition because of existing a few TiC grains in the vicinity of the TiC layers.

• Carbon letters
• /
• 제14권3호
• /
• pp.193-195
• /
• 2013

Expanded graphite (EG) was prepared using a drying process for application as an oil-adsorbent: the morphology, expansion volume, and oil absorption capacity of the EG were investigated. The expanded volume of the EG increased with an increasing reaction time and heat treatment temperature. The oil adsorption capacity of the EG was 45 g of n-dodecane per 1 g of EG. It is noted that the drying process of EG is a useful technique for a new oil-adsorbent.

• 한국결정성장학회지
• /
• 제3권1호
• /
• pp.75-84
• /
• 1993

황산동 수용액으로부터 치환법을 이용하여 흑연입자에 동을 코팅시켰다. 흑연입자표면에 연속적이고 균질하게 동이 코팅된 최적조건을 확립하기 위하여 동이온 농도, 교반속도, 반응시간 및 반응온도 등의 영향을 조사하였다. 이때 동 코팅반응의 활성화에너지는 3.59kcal/mole이었다.

• Carbon letters
• /
• 제19권
• /
• pp.1-11
• /
• 2016

In efforts to characterize and understand the properties and processing of phenylethynyl-terminated imide (LaRC PETI-5, simply referred to as PETI-5) oligomers and polymers as a high-temperature sizing material for carbon fiber-reinforced polymer matrix composites, PETI-5 imidization and thermal curing behaviors have been extensively investigated based on the phenylethynyl end-group reaction. These studies are reviewed here. In addition, the use of PETI-5 to enhance interfacial adhesion between carbon fibers and a bismaleimide (BMI) matrix, as well as the dynamic mechanical properties of carbon/BMI composites, are discussed. Reports on the thermal expansion behavior of intercalated graphite flake, and the effects of exfoliated graphite nanoplatelets (xGnP) on the properties of PETI-5 matrix composites are also reviewed. The dynamic mechanical and thermal properties and the electrical resistivity of xGnP/PETI-5 composites are characterized. The effect of liquid rubber amine-terminated poly(butadiene-co-acrylonitrile) (ATBN)-coated xGnP particles incorporated into epoxy resin on the toughness of xGnP/epoxy composites is examined in terms of its impact on Izod strength. This paper provides an extensive overview from fundamental studies on PETI-5 and xGnP, as well as applied studies on relevant composite materials.

• 한국세라믹학회지
• /
• 제23권5호
• /
• pp.17-24
• /
• 1986

β'-Sialon with different compositions was synthesized by the carbothermal reduction-nitridation of compacts containing kaolin graphite and silicon or aluminum at temperature of 1300-1450℃ under flowing gas of 90% N2-10% H2 or 20hrs. Quantitative analysis of minerals which were formed in the specimens was carried out by using the calibration curve which has been prepared from X-ray diffraction patterns. The obtained results were as follows : 1. In the formation of β'-Sialon by carbothermal reduction-nutridation of Si-Al-O-C system mixtures at 1400℃ for 20hrs. (2) β'-Sialon as a major mineral and α-Al2O3 as a minor mineral were identified in the specimen which was prepared of kaolin and graphite. (3)α-Al2O3 and 15R as a minor minerals were measured in the specimen which was prepared of kaolin aluminum and graphite. (4) AlN instead of α-Al2O3 and 15R was formed in the compacts that excess graphite(=35 wt%) was added to the mixture of kaolin and aluminium. 2. As the reaction time and temperature were increased the formation of β'-Sialon was increased whereas the phases of mllite SiC and Si2ON2 were decreased gradually.

• 한국재료학회지
• /
• 제3권2호
• /
• pp.103-110
• /
• 1993

금속동-흑연복합분말을 제조하기 위하여 염화동을 흑연주위에서 수소환원시킴으로써 흑연표면에 금속동을 석출시키는 새로운 방법으로 흑연-금속동 복합재료를 제조하고자 하였으며, 이를 위해 325 mesh이하의 KISH및 천연흑연을 모재로 하여 350-50$0^{\circ}C$의 환원온도에서 염화동을 환원시키는 실험을 실시하였다. 금속동의 분산도는 환원온도가 낮을수록 양호한 것으로 나타났으며, 금속동의 분산도를 높이기 위해서는 가능한한 환원온도를 낮게하는 것이 유리한 것으로 나타났다.

• 한국표면공학회지
• /
• 제50권2호
• /
• pp.108-113
• /
• 2017

We investigated the effect of graphite electrode geometry and combination on nanocarbon material synthesis using underwater discharge plasma(UDP). The UDP system consists of two graphite electrodes and beaker filled with de-ionized water. A high voltage of 15 kV with a frequency of 25 kHz is applied to produce UDP using an alternating-current power source. The UDP system with conical electrodes produced the largest amount of products due to the concentration of electrical fields between electrodes. In addition, hollow-shaped stationary electrode and conical-shaped moving electrode stores discharge-induced bubbles and maintains longer reaction time. We found from Raman spectroscopy and electron microscopy that high quality carbon nanomaterials including carbon nanotubes are synthesized by the UDP system.

• 한국주조공학회지
• /
• 제31권2호
• /
• pp.66-70
• /
• 2011

Hot dip aluminizing (HDA) is widely used in industry for improving corrosion resistance of material. The formation of intermetallic compound layers during the contact between dissimilar materials at high temperature is common phenomenon. Generally, intermetallic compound layers of $Fe_2Al_5$ and $FeAl_3$ are formed at the Al alloy and Fe substrate interface. In case of cast iron, high contact angle of graphite existed in the matrix inhibits the formation of intermetallic compound layer, which carry with it the disadvantage of a reduced reaction area and mechanical properties. In present work, the process for the removal of graphite existed on the surface of specimen has been investigated. And also HDA was proceeded at $800^{\circ}C$ for 3 minutes in aluminum alloy melt. The efficiency of graphite removal was increased with the reduction of particle size in sanding process. Graphite appears to be present both in the region of melting followed by re-solidification and in the intermetallic compound layer, which could be attributed to the fact that the surface of cast iron is melted down by the formation of low melting point phase with the diffusion of Al and Si to the cast iron. Intermetallic compound layer consisted of $Fe(Al,Si)_3$ and $Fe_2Al_5Si$, the layer formed at cast iron side contained lower amount of Si.

• 전기화학회지
• /
• 제22권3호
• /
• pp.122-127
• /
• 2019

유기이차전지가 가지고 있는 전극 내 낮은 접합력과 높은 계면저항의 단점을 해결하기 위하여 본 연구에서는 흑연 코팅 처리된 집전체를 사용하여 lithium terephthalate (LTA)전지의 전기화학적 특성 변화를 분석하였다. LTA 음극 활물질은 산의 이온 치환반응에 의하여 불순물 없이 합성되어 졌다. 막대 형태의 LTA 활물질로 제작된 전극과 흑연 코팅 처리된 집전체와의 접합특성은 SEM 단면과 EIS를 통하여 확인하였다. 흑연 코팅된 집전체를 사용한 LTA전지의 계면저항은 현저히 감소되었다. 순수한 금속 집전체 LTA 전지와 흑연 코팅 처리된 금속 기판 LTA 전지는 0.1C의 두 번째 사이클에서 107.6 mAh/g와 148.8 mAh/g의 방전 용량을 보인다. 흑연 코팅된 집전체를 사용한 LTA 전지는 순수한 LTA 전지에 비하여 우수한 수명 특성과 높은 방전 용량, 그리고 높은 고율 특성을 가진다.

• 방사성폐기물학회지
• /
• 제5권1호
• /
• pp.1-7
• /
• 2007

흑연음극을 이용하여 LiCl-KCl공융염내에서 금속우라늄의 전해정련을 수행하였다. Uraniurn-Graphite Intercalation Compound(U-GIC)의 형성에 의하여 우라늄 전착물의 sell-scraping이 일어나며 전해정련에서 stripping과정을 생략함으로서 전해효율을 높일 수 있다. 우라늄 전착물내의 희토류 원소 오염은 무시할 만 하였으나 약 300ppm정도의 탄소가 오염되어 있는 것으로 관찰되었다. 탄소 오염은 이트륨을 이용한 정제공정 등을 거칠 경우 제거 가능하리라 사료된다. 회수된 우라늄 전착물의 조직 특성을 분석하였으며, 스틸 음극에 의해 회수된 전착물과 비교하였다. 이 결과는 초기 실험결과 이며 보다 심층적 연구를 통하여 사용 후 금속핵연료의 전해정련 개념을 개선시킬 수 있을 것으로 판단된다.