• 대한기계학회논문집B
• /
• 제36권10호
• /
• pp.1033-1041
• /
• 2012

본 논문에서는 석탄의 물리적 화학적 구조에 의한 직접탄소 연료전지 내부의 전기화학 반응 특성의 변화에 대하여 연구하였다. 석탄의 구조, 표면적 및 기공체적, 작용기의 분포 등을 분석하기 위하여 다양한 분석 기법(TGA, XRD, BET, XPS)을 사용하였다. 석탄 내부에 존재하는 탄소의 강력한 결정구조는 연료의 비표면적 및 기공크기를 축소시켜 고 전류밀도 영역에서 급격한 포텐셜의 감소를 초래한다. 표면에 분포하는 작용기는 저전류 밀도 영역에서의 전기화학 반응에 영향을 미치며, 제한 전류밀도 및 최대 전력밀도는 전체 탄소의 양과 밀접한 상관관계를 가지고 있다는 것을 확인할 수 있었다. 전해질의 물질전달 향상 및 작동온도에 의한 영향도 논하였다.

• Journal of Microbiology and Biotechnology
• /
• 제21권2호
• /
• pp.154-161
• /
• 2011

L. lactis sk071115 has been shown to grow more actively and generate lower levels of lactate in glucose-defined medium with nitrate than in medium with Mn(IV). By adding Mn(IV) to a L. lactis culture, lactate production was relatively reduced in combination with Mn(II) production, but cell mass production levels did not increase. Both cell-free extract and intact L. lactis cells reacted electrochemically with Mn(IV) but did not react with Mn(II) upon cyclic voltammetry using neutral red (NR) as an electron mediator. A modified graphite felt cathode with NR (NR-cathode) was employed to induce electrochemical reducing equivalence for bacterial metabolism. Cell-free L. lactis extract catalyzed the reduction of Mn(IV) to Mn(II) under both control and electrochemical reduction conditions; however, the levels of Mn(II) generated under electrochemical reduction conditions were approximately 4 times those generated under control conditions. The levels of Mn(II) generated by the catalysis of L. lactis immobilized in the NR-cathode (L-NR-cathode) under electrochemical reduction conditions were more than 4 times that generated under control conditions. Mn(II) production levels were increased by approximately 2.5 and 4.5 times by the addition of citrate to the reactant under control and electrochemical reduction conditions, respectively. The cumulative Mn(II) produced from manganese ore by catalysis of the L-NR-cathode for 30 days reached levels of approximately 3,800 and 16,000 mg/l under control and electrochemical reduction conditions, respectively. In conclusion, the electrochemical reduction reaction generated by the NR-cathode activated the biochemical reduction of Mn(IV) to Mn(II) by L. lactis.

• Journal of Microbiology and Biotechnology
• /
• 제20권1호
• /
• pp.94-100
• /
• 2010

Zymomonas mobilis was immobilized in a modified graphite felt cathode with neutral red (NR-cathode) and Saccharomyces cerevisiae was cultivated on a platinum plate anode. An electrochemical redox reaction was induced by 3 volts of electric potential charged to the cathode and anode. The Z. mobilis produced 1.3-1.5 M of ethanol in the cathode compartment, whereas the S. cerevisiae produced 1.7-1.9 M in the anode compartment after 96 h. The ethanol produced by the Z. mobilis immobilized in the NR-cathode and S. cerevisiae cultivated on the platinum plate was 1.5-1.6 times higher than that produced under conventional conditions. The electrochemical oxidation potential inhibited Z. mobilis, but activated S. cerevisiae. The SDS-PAGE pattern of the total soluble proteins extracted from the Z. mobilis cultivated under the electrochemical oxidation conditions was gradually simplified in proportion to the potential intensity. Z. mobilis and S. cerevisiae were cultivated in the cathode and anode compartments, respectively, of an electrochemical redox combination system. The Z. mobilis culture cultivated in the cathode compartment for 24 h was continuously transferred to the S. cerevisiae culture in the anode compartment at a rate of 300 ml/day. Approx. 1.0-1.2 M of ethanol was produced by the Z. mobilis in the cathode compartment within 24 h, and an additional 0.8-0.9 M produced by the S. cerevisiae in the anode compartment within another 24 h. Thus, a total of 2.0-2.1 M of ethanol was produced by the electrochemical redox combination of Z. mobilis and S. cerevisiae within 48 h.

• Carbon letters
• /
• 제28권
• /
• pp.38-46
• /
• 2018

Modified pitch A (MPA) and modified pitch B (MPB) were prepared by oxidative polymerization and thermal polycondensation reaction with refined pitch as the raw material, respectively. The toluene soluble components (TS-1 and TS-2) were obtained by solvent extraction from MPA and MPB, separately. The Flynn-Wall-Ozawa method and Kissinger-Akahira-Sunose method were used to calculate the pyrolysis activation energy of TS. The Satava-Sestak method was used to investigate the pyrolysis kinetic parameters of TS. Moreover, the optical microstructure of the thermal conversion products (TS-1-P and TS-2-P) by calcination shows that TS-1-P has more contents of mosaic structure and lower contents of fine fiber structure than TS-2-P. The research result obtained by a combination of X-ray diffraction and the curve-fitting method revealed that the ratios of ordered carbon crystallite (Ig) in TS-1-P and TS-2-P were 0.3793 and 0.4417, respectively. The distributions of carbon crystallite on TS-1-P and TS-2-P were calculated by Raman spectrum and curve-fitting analysis. They show that the thermal conversion product of TS-2 has a better graphite crystallite structure than TS-1.

• 대한화학회지
• /
• 제23권3호
• /
• pp.180-185
• /
• 1979

각종 陰極, 卽 Ti, Zr, Ni, Pt, Cu, Ag, Au, Zn, Hg, Pb 및 흑연의 사용으로 2-butyne-1, 4-diol (BID)로부터 2-butene-1,4-diol (BED)까지의 電氣化學的 還元擧動에 관하여 연구하였다. IB族 金屬을 陰極으로 사용한 陰極分極曲線은 알칼리용액중에서 BID에 對해 한개의 還元波가 생기나 BED의 경우는 지지전해질내에서와 마찬가지로 還元波가 생기지 않았다. 고로 BID환원반응에 가장 적당한 陰極은 Cu, Ag, Au임을 알았다. 알칼리性 BID용액에서 銀電極을 사용한 電位走査法에서 peak電流는 電位走査速度의 제곱근과 BID농도에 比例하였다. 限界電流의 對數와 絶對溫度의 逆數의 관계로부터 구한 BID의 活性化에너지는 3.75kcal/mole였다. 고로 알칼리용액중 銀電極을 사용한 BID의 還元電流는 自己擴散에 의한 擴散電流임을 알았다.

• Composites Research
• /
• 제29권3호
• /
• pp.104-110
• /
• 2016

본 논문은 층간 삽입 반응을 이용하여 그래핀을 박리하는 동시에 탄소나노튜브를 개별 분산시키고 이를 복합 필름으로 제조한 결과를 보고한다. 일반적으로 그래핀과 탄소나노튜브의 경우 흑연과 탄소나노튜브 번들로부터의 개별적 박리를 통해 제조될 수 있으나 장시간의 공정 시간을 요구하게 된다. 본 연구에서는 그래핀과 탄소나노튜브의 동시 박리 및 분산을 위해 흑연 및 탄소나노튜브 번들 내로 포타슘 소듐 타르트레이트를 삽입했으며 XRD 분석을 통해 흑연 층간 거리 및 탄소나노노튜브 번들 내 거리의 증가를 확인했다. 제조된 층간삽입화합물로부터 박리된 그래핀 및 탄소나노튜브의 경우 매우 낮은 산화도(< 8.3 at%)를 나타냈으며 제조된 물질을 여과 장치 및 스프레이 전사를 통해 복합 필름으로 제조한 결과 그래핀 및 탄소나노튜브의 단일 필름에 대비하여 복합 필름의 경우 전도성의 향상을 보였다.

• Macromolecular Research
• /
• 제10권5호
• /
• pp.253-258
• /
• 2002

The multi-wall carbon nanotubes (MWNTs) with graphite crystal structure were synthesized by the catalytic decomposition of a ferrocene-xylene mixture in a quartz tube reactor to use as the conductive filler in the binary polymer matrix composed of poly(vinylidene fluoride) (PVdF) and poly(vinyl pyrrolidone) (PVP) for the EMI (electromagnetic interference) shielding applications. The yield of MWNTS was significantly dependent on the reaction temperature and the mole ratio of ferrocene to xylene, approaching to the maximum at 800 $^{\circ}C$ and 0.065 mole ratio. The electrical conductivity of the MWNTs-filled PVdF/PVP composite proportionally depended on the mass ratio of MWNTs to the binary polymer matrix, enhancing significantly from 0.56 to 26.7 S/cm with the raise of the mass ratio of MWNTs from 0.1 to 0.4. Based on the higher electrical conductivity and better EMI shielding effectiveness than the carbon nanofibers (CNFs)-filled coating materials, the MWNTs-filled binary polymer matrix showed a prospective possibility to apply to the EMI shielding materials. Moreover, the good adhesive strength confirmed that the binary polymer matrix could be used for improving the plastic properties of the EMI shielding materials.

• Journal of Microbiology and Biotechnology
• /
• 제20권3호
• /
• pp.485-493
• /
• 2010

A modified graphite felt electrode with neutral red (NR-electrode) was shown to catalyze the chemical oxidation of nitrite to nitrate under aerobic conditions. The electrochemically oxidized NR-electrode (EO-NR-electrode) and reduced NR-electrode (ER-NR-electrode) catalyzed the oxidation of $1,094{\pm}39$ mg/l and $382{\pm}45$ mg/l of nitrite, respectively, for 24 h. The electrically uncharged NR-electrode (EU-NR-electrode) catalyzed the oxidation of $345{\pm}47$ mg/l of nitrite for 24 h. The aerobic bacterial community immobilized in the EO-NR-electrode did not oxidize ammonium to nitrite; however, the aerobic bacterial community immobilized in the ER-NR-electrode bioelectrochemically oxidized $1,412{\pm}39$ mg/l of ammonium for 48 h. Meanwhile, the aerobic bacterial community immobilized on the EU-NR-electrode biochemically oxidized $449{\pm}22$ mg/l of ammonium for 48 h. In the continuous culture system, the aerobic bacterial community immobilized on the ER-NR-electrode bioelectrochemically oxidized a minimal $1,337{\pm}38$ mg/l to a maximal $1,480{\pm}38$ mg/l of ammonium to nitrate, and the community immobilized on the EU-NR-electrode biochemically oxidized a minimal $327{\pm}23$ mg/l to a maximal $412{\pm}26$ mg/l of ammonium to nitrate every two days. The bacterial communities cultivated in the ER-NR-electrode and EU-NR-electrode in the continuous culture system were analyzed by TGGE on the $20^{th}$ and $50^{th}$ days of incubation. Some ammonium-oxidizing bacteria were enriched on the ER-NR-electrode, but not on the EU-NR-electrode.

• 한국재료학회지
• /
• 제15권8호
• /
• pp.528-535
• /
• 2005

It is inclined to increase that use of hazardous substances such as lead(Pb), mercury (Hg), cadmium(Cd) etc. are prohibited in the electronics according to environmental friendly policies of an advanced nation for protecting environment of earth. As this reasons, many researches for ensuring the reliability were proceeding in Pb free soldering process. n the flux remains on the PCB(printed circuit board) in the soldering process or the electronics exposed to corrosive environment, it becomes the reasons of breakdown or malfunction of the electronics caused by corrosion. Therefore in this studies we researched the polarization and Tafel properties of Sn40Pb and SnCu system solders based on the electrochemical theory. The experimental polarization curves were measured in distilled ionized water and 1 mole $3.5 wt\%$ NaCl electrolyte of $40^{\circ}C$, pH 7.5. Ag/AgCl and graphite were utilized by reference and counter electrodes, respectively. To observe the electrochemical reaction, polarization test was conducted from -250mV to +250mV. From the polarization curves composed of anodic and cathodic curves, we obtained Tafel slop, reversible electrode potential(Ecorr) and exchange current density((cow). In these results, we compared the corrosion rate of SnPb and SnCu solders.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.156-156
• /
• 2016

The effect of nitrogen doping on the mechanical and tribological performance of single-layer tetrahedral amorphous carbon (ta-C:N) coatings of up to $1{\mu}m$ in thickness was investigated using a custom-made filtered cathode vacuum arc (FCVA). The results obtained revealed that the hardness of the coatings decreased from $65{\pm}4.8GPa$ to $25{\pm}2.4GPa$ with increasing nitrogen gas ratio, which indicates that nitrogen doping occurs through substitution in the $sp^2$ phase. Subsequent AES analysis showed that the N/C ratio in the ta-C:N thick-film coatings ranged from 0.03 to 0.29 and increased with the nitrogen flow rate. Variation in the G-peak positions and I(D)/I(G) ratio exhibit a similar trend. It is concluded from these results that micron-thick ta-C:N films have the potential to be used in a wide range of functional coating applications in electronics. To achieve highly conductive and wear-resistant coatings in system components, the friction and wear performances of the coating were investigated. The tribological behavior of the coating was investigated by sliding an SUJ2 ball over the coating in a ball-on-disk tribo-meter. The experimental results revealed that doping using a high nitrogen gas flow rate improved the wear resistance of the coating, while a low flow rate of 0-10 sccm increased the coefficient of friction (CoF) and wear rate through the generation of hematite (${\alpha}-Fe_2O_3$) phases by tribo-chemical reaction. However, the CoF and wear rate dramatically decreased when the nitrogen flow rate was increased to 30-40 sccm, due to the nitrogen inducing phase transformation that produced a graphite-like structure in the coating. The widths of the wear track and wear scar were also observed to decrease with increasing nitrogen flow rate. Moreover, the G-peaks of the wear scar around the SUJ2 ball on the worn surface increased with increasing nitrogen doping.