• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.19-22
• /
• 1997

The surface modificaion of alumina by $Al_2$O$_3$/SiC nanocomposite coating was studied in terms of processing and microstructure. A powder slurry of 5 vol% SiC composition was dipcoated onto presintered alumina bodies and pressurelessly sintered at 1$700^{\circ}C$ for 2 h in $N_2$. The used of organic binder and plasticizer in the slurry preparation, and the control of the density of presintered alumina body were found to be necessary to avoid cracking and warping during processing. The nanocomposite coating well bonded to the alumina body with thickness about 110 ${\mu}{\textrm}{m}$. The average grain size of coating (2 ${\mu}{\textrm}{m}$) was much finer than that of alumina body (13 ${\mu}{\textrm}{m}$). Fracture surface observations revealed mostly transgranular fracture for the coating, whereas intergranular fracture for the alumina body. Some pores (about 6%) were observed in the coating layer, although the alumina body showed fully dense microstructure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.35-37
• /
• 1988

Polycrystalline $Cd_{1-x}Zn_xS$ films were prepared by coaling a slurry which consisted of CdS, ZnS, $CdCl_2$ and propylene glycol on gloss substrates and by sintering in a nitrogen atmosphere. Microstructures, optical transmittance and electrical resistance of the sintered films have been investigatd. Grain shape of $Cd_{1-x}Zn_xS$ films sintered in a sealed boat was nearly spherical but the shape became, irregular when sintered in evaporating condition due to occurrence of CIGM (Chemically Induced Grain-boundary Migration). Controlling the rate of evaporation of $CdCl_2$, sintered $Cd_{1-x}Zn_xS$ films with high optical transmittance and low electrical resistance could be obtained.

• Transactions of Materials Processing
• /
• v.9 no.4
• /
• pp.389-394
• /
• 2000

The studies on gram size refinement for rheocast processing of hypereutectic Al-18%Si alloys have been investigated in the present study. To increase the efficiency of mechanical stirring, sieve type stirrer are newly designed and implemented for rheocasting of hypereutectic Al-18%Si alloy. Mechanical stirring of semi-solid slurry by using sieve type mechanical stirrer results in morphological changes of the primary Si particles, from angular rod shape to near spherical shape and uniform distribution of proeutectic Si. The remarkable spheroidization of Primary Si Particles and distributional uniformity of proeutectic Si show well the efficiency of sieve type mechanical stirring method which can accelerate the coalescence-fracture-wear of the individual particles by strong turbulent flow between lattices during rotation of sieve type stirrer.

• The Korean Journal of Ceramics
• /
• v.5 no.2
• /
• pp.119-124
• /
• 1999

Silicon nitride ceramics with highly oriented microstructure were prepared by tape casting a slurry containing 5 wt% of the silicon nitride whiskers. The whiskers were aligned in the casting direction and worked as seeds for the grain growth. The anisotropy was observed from the sintering shrinkage, Vickers indentation crack lengths, and XRD patterns. The cracks were much longer on the surface normal to the aligned grains than on the tape casting surface where the lateral cracks were also observed. The effect of sintering additives and the annealing treatment on the indentation crack length was examined. The sample with higher silica content had longer cracks than the one with lower silica content. The crack length anisotropy increased after annealing at 2123K.

• Korean Journal of Organic Agriculture
• /
• v.16 no.2
• /
• pp.219-230
• /
• 2008

This trial was conducted to assess effects of cattle slurry application on productivity and feed values of barley and hairy vetch when they were influenced by single or mixed-sowed cultivation in paddy fields, and to obtain good quality of organic forage resources. The results summarized are as follows. For barley and hairy vetch, single-sowed cultivation was lower in annual dry matter (DM) and total digestible nutrients (TDN) yields than mixed-sowed (P<0.05). Although crude protein (CP) contents for the barley within single-sowed treatments were lowest as 6.5%, those of hairy vetch within the same sowed method were highest as 16.7%. However, mixed-sowed cultivation with barley and hairy vetch, showing 13.8% CP content, was significantly (P<0.05) higher than CP and relative feed value (RFV) of barley alone treatment. For barley alone treatment, cattle slurry application significantly increased annual DM and TDN yields in comparison with treatments of P+K fertilization as chemical fertilizers and no fertilizer as controls. Results from cattle slurry application showed 84% and 82% in contrast with chemical fertilizer for annual DM and TDN yields, respectively. For mixed-sowed cultivation with barley and hairy vetch, cattle slurry application showed 90% and 94% annual DM and TDN yields, respectively as compared with N+P+K fertilization as chemical fertilizers. Crude protein contents ($14.2{\sim}15.9%$) for cattle slurry application treatments were significantly (P<0.05) higher than those of other treatments. Moreover, cattle slurry application treatment had the highest TDN and RFV among treatments, showing $60.7{\sim}61.8%$ and $112.2{\sim}118.1$, respectively. For hairy vetch alone treatments, annual DM and TDN yields of cattle slurry alone application treatment were highest among fertilization treatments. Furthermore, CP, TDN and RFV of cattle slurry alone application treatments were significantly (P<0.05) higher than those of other treatments. The results showed that mixed-sowed cultivation rather than single-sowed for barley or hairy vetch improved their nutritive value and quality, and also within mixed-sowed cultivation, cattle slurry application increased production yield per ha and CP contents. In the application of above system to organic livestock farming, it would be expected that forages produced by cattle slurry application under mixed-sowed method might become a substitute for foreign organic grain as protein sources.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.1
• /
• pp.55-64
• /
• 2011

This study was conducted to investigate the effects of green manure crops and cattle slurry application on rice productivity and nutrient movement in paddy land. Cropping systems used in this study were consisted of five designs, such as mono-cropping rice applied with standard fertilizer (MRS), double-cropping whole crop barley following rice applied with cattle slurry (DWBRC), double-cropping whole crop rye following rice applied with cattle slurry (DWRRC), mono-cropping rice applied with following milk vetch (MRMV) and mono-cropping rice applied with following hairy vetch (MRHV). The field experiments were conducted on the clay loam at Backsanmyun, Kimje, Chunlabukdo province in Korea for three years (May 2006 to Apr. 2009). This study was arranged in completely randomized design with three replicates. Culm and panicle length of rice were higher in MRS than other treatments. Ripened grain ratio was higher in MRS than other treatments. Yield of Grain showed high in MRS, DWBRC and DWRRC than MRMV and MRHV. The yield of dry matter (DM) of whole crop barley in DWBRC increased significantly as compared with that of rye in DWRRC. The pH, and contents of T-N, $P_2O_5$ and organic matter (OM) and exchangeable cation (Ca, Na, Mg and K) in soil samples collected at the end of the experiment were remarkably higher than those at the beginning of the experiment. The concentrations of $NO_3$-N, $NH_4$-N and $PO_4$ in discharge water in DWBRC and DWRRC were higher than MRS.

• Journal of Powder Materials
• /
• v.13 no.5 s.58
• /
• pp.336-339
• /
• 2006

Magnetic properties of nanostructured materials are affected in complicated manner by their microstructure such as pain size (or particle size), internal strain and crystal structure. Thus, studies on the synthesis of nanostructured materials with controlled microstructure are necessary fur a significant improvement in magnetic properties. In the present work, nanostructured Fe-Co alloy powders with a grain size of 50 nm were successfully fabricated from the powder mixtures of (99.9% purity) $FeCl_2$ and $CoCl_2$ by chemical solution mixing and hydrogen reduction.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.287-288
• /
• 2006

Two approaches for the fabrication of tailored powder composites with specially distributed pore-grain structure and chemical composition are investigated. Electrophoretic Deposition (EPD) followed by microwave sintering is employed to obtain functionally graded materials (FGM) by in-situ controlling the deposition bath suspension composition. $Al_2O_3/ZrO_2$ and zeolite FGM are successfully synthesized using this technique. In order to fabricate an aligned porous structure, unidirectional freezing followed by freeze drying and sintering is employed. By controlling the temperature gradient during freezing of powder slurry, a unidirectional ice-ceramic structure is obtained. The frozen specimen is then subjected to freeze drying to sublimate the ice. The obtained capillary-porous ceramic specimen is consolidated by sintering. The sintering of the graded structure is modeled by the continuum theory of sintering.

• Analytical Science and Technology
• /
• v.6 no.2
• /
• pp.225-229
• /
• 1993

ATZ was prepared by adding an alumina sol equivalent to 2wt% as $Al_2O_3$ to an aqueous slurry of alumina (AKP-30) and zirconia (TZ-2Y or TZ-0Y) in the range of 10-30ATZ, followed by gelation, calcination, and sintereing between $1450^{\circ}C{\sim}1550^{\circ}C$ for 2h. They showed excellent microstructure with alumina grains of <$0.5{\mu}m$ and>99% of the theoretical density. Fracture toughness of ${\sim}8MPa{\cdot}m^{1/2}$ was observed around 20ATZ which was higher than $6MPa{\cdot}m^{1/2}$ obtainable by ball-milling.

• Computers and Concrete
• /
• v.20 no.2
• /
• pp.145-154
• /
• 2017

In geological engineering, grouting with Portland cement is a common technique for ground improvement, during which micro-fine cement is applied as a slurry, such that it intrudes into soil voids and decreases soil porosity. To determine the utility and behavior of cements with different Blaine values (index of cement particle fineness) for stabilization of fine sand, non-destructive and destructive tests were employed, such as laser-ray determination of grain size distribution, and sedimentation, permeability, and compressive strength tests. The results of the experimental study demonstrated a suitable mix design for the upper and lower regions of the cement-grading curve that are important for grouting and stabilization. Increasing the fineness of the cement decreased the permeability and increased the compressive strength of grouted sand samples considerably after two weeks. Moreover, relative to finer (higher Blaine value) or coarser (lower Blaine value) cements, cement with a Blaine value of $5,100cm^2/g$ was optimal for void reduction in a grouted soil mass. Overall, study results indicate that cement with an optimum Blaine value can be used to satisfy the designed geotechnical criteria.