• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1993년도 추계 학술대회지
• /
• pp.20-21
• /
• 1993

• Journal of Forest and Environmental Science
• /
• 제10권1호
• /
• pp.38-48
• /
• 1994

강원도산(江原道産) 참나무과(科) 4수종(樹種)의 건조특성(乾燥特性)을 파악코져 $100^{\circ}C$에서 급속건조(急速乾燥)를 실시하여 건조중(乾燥中) 함수율(含水率)과 건조경과(乾燥經過), 초기할렬(初期割裂)(목구할렬(목구할렬(木口割裂))과 표면할렬(表面割裂)), 찌그러짐, 내부할렬(內部割裂) 등의 건조결함(乾燥缺陷)을 조사(調査)하여 추정건조(推定乾燥)스케쥴을 작성(作成)한 결과(結果)는 다음과 같다. 건조시간별(乾燥時間別) 건조중(乾燥中) 함수율(含水率)은 초기함수율(初期含水率)이 높은 판재(板材)일수록 급속(急速)한 곡선적(曲線的) 감소(減少)를 나타내었고 건조소요시간(乾燥所要時間)이 길었으며 굴참나무가 건조중(乾燥中) 할렬(割裂)의 발생량(發生量)이 가장 크게 나타났으며 구해진 추정건조(推定乾燥)스케쥴은 $T_5-C_2$였다. 또한 모든 수종(樹種)의 목리방향별(木理方向別) 수축율(收縮率)은 접선방향(接線方向)(T) > 방사방향(放射方向)(R) > 섬유방향(纖維方向)(L)의 순위(順位)였으며 급속건조법(急速乾燥法)에 의한 수축율(收縮率)이 정상적인 수축율(收縮率)보다 크게 나타났다.

• 한국작물학회지
• /
• 제47권3호
• /
• pp.250-253
• /
• 2002

미곡종합처리장을 이용한 보리 산물수매 체계를 조사 분석하여 보리의 산물수매를 확대를 위한 기초자료를 제공하고자 실시하였다. 1.보리의 입고는 오전 10시부터 시작되었고, 오후 3시 이후에는 전체 산물 수매량의 61.1%가 입고되었다. 입고된 보리의 일별 평균 수분함량은 15.8-29.6%범위이었고, 건조기에 투입된 보리의 날짜별, 농가별, 필지별 수분함량의 변이가 켰다. 2. 건조 시간은 투입되는 보리의 수분함량에 따라 차이가 많았으며, 평균 건조시간은 9.5시간, 평균 건감율은 0.89% 이었다. 수분함량이 너무 높으면 건조시간이 많이 소요되고 투입구나 저류부의 탱크를 막는 고장의 원인이 되고, 품질이 떨어지므로, 후작물 재배에 지장이 없는 한 늦게 수확하는 것이 좋을 것으로 생각되었다. 3. 입고 보리에 함유된 이물질량은 보리의 수분함량 19.7-30%범위에서는 0.3-l.2%로 별 차이가 없었으나, 수분함량이 30%이상이 되면 급격히 증가하여 수분함량 38.9%에서는 이물질의 양이 5.9%로 많아졌다. 이물질 함량을 낮추기 위하여 분리능력이 좋은 조선기로 교체가 필요하였다. 4. 건조비용은 14% 종자수분 함량 환산 중량 기준으로 24% 이상은 50원, 17%이하는 30원이었다. 저장은 실내 사각빔과 폴리 콘 백에 담아 평상창고에 보관하였다. 저장 중 품질 저하를 막기 위하여 실내 또는 실외 저장사일로의 증설이 필요하였다.

• Journal of Biosystems Engineering
• /
• 제25권1호
• /
• pp.33-38
• /
• 2000

This study was performed to investigate airtight storage characteristics of rough rice using airtight flexible pve container. A storage test of rough rice of 4 tonnes was carried out to determine the changes of gas composition of air in the container, grain moisture content, air temperature and relative humidity , the presence of insects ,germination rate, crack ratio , fat acidity , 1000-kernel weight, and brown rice recovery over storage period of 5 months in Suwon. Concentration of oxygen was decreased from 20% to 16% and carbon dioxide was increased of from 0.03% to 1.6%. The grain moisture content was decreased from 14.4%(w.b) to 14.1%(w.b) for 5 months storage period . Insect population levels were low but these increased after 5 months storage. Most of insects were dead, Fat acidity increased from 7.5(mg KOH/100g) to 10.2(mg KOH/100g). Other storage factors such as germination rate, brown rice recovery and 1000-kernel , and 1000-kernel weight slightly decreased and crack ratio was slightly increased. Qualities of rough rice during 5 months storage period under hemetic air conditions were maintained fairly good considering the above changes of quality factors during storage.

• Journal of the Korean Wood Science and Technology
• /
• 제31권3호
• /
• pp.61-69
• /
• 2003

This study investigated the effect of moisture content and loading direction on dowel bearing strength of two types of SCL. Dowel bearing tests of LVL and PSL were conducted with two different MC level, 7.5% and 19%, and two different oriention, L-direction(loading parallel to grain) and X-direction(loading perpendicular to grain). Most of specimens showed typical load-deformation curves and intersected 5% offset line. Failure modes were classified into two categories; spliting(for L-direction specimens) and peeling(for X-direction specimens). Dowel bearing strength generally decreased with increasing MC. The decreasing rate was more significant in X-directon. ESG also decreased with increasing MC, and the ratio of ESG of 7.5% versus 19% was about 1.47. Dowel bearing strength of LVL and PSL in L-direction was higher than that of X-direction. This results indicated that MC and loading orientation had a significant effect on dowel bearing strength of SCL. The average dowel bearing strength of LVL were higher than that of PSL in each loading direction. Two types of probability distribution model were chosen to quantify strength distribution, normal and 2-parameter weibull distribution. The two models showed good agreement with the data, especially in lower tail of the cumulative distribution. Normal and 2-parameter weibull distribution seemed to proper model of the dowel bearing strength for each MC levels.

• 지질공학
• /
• 제18권3호
• /
• pp.311-319
• /
• 2008

주파수 인피던스를 이용하는 ThetaProbe ML2x인 ADR 형식의 토양함수비센서를 적용하여 주문진 표준사, 상주 화강 풍화토, 장수 편마암풍화토을 대상으로 실험을 수행하였다. 시험의 목적은 측정센서의 측정 정밀도를 측정로드부 삽입 깊이에 따른 변화 양상을 파악하였다. 흙매질은 체적함수비 함량과의 관계를 비교하기 위하여 건조상태와 습윤상태로 구분하여 수행하였다. 측정결과에서 측정로드부가 흙매질 내 5cm 이상 삽입되면 측정전압의 변화폭이 크게 감소하는 것을 파악하였다. 또한, 표준사와 같이 균질한 입자를 가진 흙보다는 점토와 실트 등과 같은 세립질을 함유한 화강풍화토와 편마암풍화토에서 측정전압이 안정적인 형태를 갖는 것으로 나타났다. 따라서, 측정치는 측정로드부가 다공질매질과의 접촉 면적이 커질수록 안정적인 값을 제공한다.

• 한국농공학회지
• /
• 제16권4호
• /
• pp.3600-3610
• /
• 1974

Experimental work of batch-type dryer was conducted to develop its optimurm operating conditions by analyzing the major factors which affect the drying performance. A laboratory batch-type dryer was constructed and tested for various levels of heated-air rates, and depths of grain deposit. Tong-il rice variety having the initial moisture content of approximaely 23 per cent in wet basis was used for the experiment. The criteria selected for establishing the optimum operating condition were the drying performance rate, the thermal efficiency, and the operational cost of the dryer. The results of the study are summarized as follows: 1. The performance rate of dryer for a specific operating condition was defined as total amount of material dried per hour when the moisture content of grains in the upperlayer reaches to 16 per cent in wet basis. The optimum operating conditions as viewed in the rate of drying performance could be justified by functional realtionship between the depth of grain deposit and air flow rate. In other words, there was a definite depth of grain deposit for a given air-rate which make the dryer performance maximum. The optimum grain depth for the batch-type dryer with 3.3㎡ loading area and with the attached axial fan was about 35cm. 2. The thermal efficiency for the dryer was evaluated by the ratio of the latent heat required to evaporate the grain moisture to the heat input required to raise the ambient air-temperature to 40 degree centigrade. The optimum operating condition as viewed in term of thermal efficiency analyzed was that grater depth and lower air flow-rate may be desirable. This condition is contracted with the optimum condition as viewed by the dryer performance rate. 3. The annual operating cost of batch-type dryer was analyzed for different annual hour of use and for different operation condition. The optimum condition as viewed in terms of operating cost was almost identical to one as viewed in terms of dryer performance rate. Therefore, the most economical use of batch-type dryer for the same annual operating hours can be obtained when the dryer operated in the condition of maximum dryer performance rate. Increasing the annual operating hour may be desirable to cut down the dryer operation cost, since the annual hour of dryer use is much sensitive to the operating cost than any peractical conditions of dryer operation. 4. The most desirable operational condition as justified by combining all the criteria, dryer performance rate, thermal efficiency and annual operating cost, could be concluded to operate the dryer in the condition of maximum performance rate. The condition in general is identical to the lowest operation cost for a given annual operating hour.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권12호
• /
• pp.1690-1698
• /
• 2011

Feedlot and in vitro ruminal experiments were conducted to assess the effects of saponin-containing surfactant applied during tempering of barley grain on cattle growth performance and on ruminal fermentation. In the feedlot experiment, treatments with three barley grain/barley silage based diets were prepared using barley grain at 7.7% moisture (dry, D), after tempering to 18% moisture (M), or after tempering with a saponin-based surfactant included at 60 ml/t (MS). Each treatment was rolled at settings determined previously to yield optimally processed barley. A total of 180 newly weaned British${\times}$Charolais steers were fed three diets in 18 pens for a 63-d backgrounding period and 91-d finishing period to determine feed intake, growth rate and feed efficiency. Cattle were slaughtered at the end of the experiment to measure the carcass characteristics. Tempering reduced (p<0.001) volume weight and processing index, but processing characteristics were similar between MS and M. Tempering increased (p<0.05) growth during backgrounding only, compared with D, but did not affect feed intake in either phase. During backgrounding, feed efficiency was improved with tempering, but during finishing and overall this response was only observed with the surfactant. Tempering did not affect carcass weight, fat content or meat yield. Surfactant doubled the proportion of carcasses grading AAA. In the in vitro experiment, barley (500 mg; ground to <1.0 mm or steam-rolled) was incubated in buffered ruminal fluid (40 ml) without or with surfactant up to 20 ${\mu}l/g$ DM substrate for 24 h. Surfactant increased (p<0.05) apparent DM disappearance and starch digestibility but reduced productions of gas and the volatile fatty acid and acetate:propionate ratio, irrespective of barley particle size. Compared with feeding diets prepared with non-tempered barley, tempering with surfactant increased the feed efficiency of feedlot steers. This may have arisen from alteration in processing characteristics of barley grain by surfactant rather than its direct effect on rumen microbial fermentation.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.67-78
• /
• 1990

This study was performed to determine the characteristics of physical and mechanical properties of domestic wood based materials; plywood, particleboard, medium density fiberboard. Main items of tested properties were panel size, moisture content, water absorption, linear expansion and thickness swelling, glue bond shear strength, bending properties(stress at proportional limit, modulus of rupture. modulus of elasticity), tensile strength, screw holding strength, and internal bond as neccessary. the results were discussed mainly with Korean Standards. The obtained conclusions are as follows; 1. Length and width of 3mm thin plywood(3-ply) and 12mm thick plywood(7-ply) were satished with KS-standard, but thicknesses of these panels were not- passed tolerance limit except one of eight makers. 2. Length and width of particleboard and medium density fiberboard were greater than the tolerance limit value of KS standard, but the thicknesses of these panels were passed this value. 3. Moisture contents of 12mm thick and 3mm thin plywood were satisfied with KS-standard except one mill made 3mm thin plywood. 4. Moisture absortion of plywood was not passed tolerance limit of KS-standard but particleboard was satisfied with this standard value. 5. Dry and wet shear strengths in glue bond of 3mm thin plywood were not reached to KS-standard, but those of 12mm thick plywood were sufficiently satisfied with KS standrad. 6. Modulus of ruptures, parallel to grain and perpendicular to grain of plywood, and particleboard and medium density fiberboard were satisfied with KS-standard. 7. Tensile strengths, parallel to grain and perpendicular to grain of plywood were satisfied with allowance stress of US product standard PS 1-74. 8. Screw holding strength of particleboard was not reached to KS standard, but internal bond was satisfied with KS standard.

• 한국작물학회지
• /
• 제60권2호
• /
• pp.174-179
• /
• 2015

이 연구는 맥류 곡실발효사료 조제를 위한 적정 수확시기 및 수확시기별 곡실 발효사료의 발효품질을 평가하기 위하여 실시하였다. 그 결과, 알곡의 수분함량은 수확시기가 늦어짐에 따라 감소하는 경향을 보였고, 이삭비율과 천립중은 맥종별 모두 출수 후 일수가 경과됨에 따라 높아지는 경향을 보였다. 알곡수량은 맥종 모두 수확시기가 늦어질수록 유의적으로 증가하는 경향을 보였다(p<0.05). 조단백질 함량은 수확시기가 늦어질수록 맥종 모두 높아지는 경향을 보였고, 조섬유함량은 낮아지는 경향을 보였으며, 조지방과 조회분 함량은 비슷하거나 약간 낮아지는 경향을 보였지만 통계적인 유의성은 없었다. 곡실사료의 발효 전후 사료가치를 비교하여 보면, 일반성분들이 발효를 거친 후 약간 증가되는 경향은 있었지만 유의적인 차이는 나타나지 않았다. 발효품질 면에서는 공시한 맥종 모두 수확시기가 늦어질수록 pH는 높아지고, 젖산함량은 유의적으로 낮아지는 경향을 보였다(p<0.05). 초산함량은 맥종 모두 수확시기에 따른 차이를 나타내지 않았고, 낙산은 검출되지 않았다. 따라서 수량과 발효품질을 고려할 때, 맥류 곡실사료 조제를 위해서는 겉보리과 쌀보리는 출수 후 35일, 밀은 출수 후 40~45일에 수확하는 것이 적당한 것으로 판단된다.