• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.1-14
• /
• 2017

In Korea, the soil series derived from sedimentary rocks are classified into seven soil series of coarse loamy soil such as Dain, Danbug, Dongam, Imdong, Jeomgog, Maryeong, and Yonggog; seventeen soil series of fine loamy soil such as Angye, Anmi, Banho, Bigog, Deoggog, Dogye, Dojeon, Gamgog, Gugog, Jincheon, Maji, Mungyeong, Oggye, Samam, Yanggog, Yeongwol, and Yulgog; six soil series of fine silty soil such as Goryeong, Bonggog, Juggog, Gyeongsan, Yuga, and Yugog; and four soil series of clayey soil such as Mitan, Pyeongan, Pyeongjeon, and Uji. All thirty-four soil series have different drainage rates and topography. However, the soil texture depends on the parent rock. The buffer functions in GIS (Geographic Information System) techniques were used to calculate adjacent soil series from a soil series. The length of the adjacent soil series was adjusted because a side of the buffer area was one meter long. The cluster analysis was conducted using the CCC (Cubic Clustering Criterion) method, in which the number of clusters is calculated based on the individual soil series ratio. Soil survey has been carried out since 1964 as "The reconnaissance soil survey", and 1:5,000 detailed soil survey was completed in 1999 with a five-years plan in Korea. Today, all the soil survey information has been computerized. GIS techniques were used to establish a digital soil map; however, there have not been any studies to interpret pedogenesis using the GIS technique. In this study, the area of the adjacent soil series were obtained using the GIS technique. The area of the adjacent soil series can be calculated based on the information area. The similarities of soil originated from sedimentary rocks were estimated using the length. As a result, the distribution of grain size was different based on the types of sedimentary rocks and the location. The clusters were distinguished into limestone, sandstone, and shale. In addition, the soil derived from shale was divided into red shale and gray shale. This means that quantitative interpretation of the catena and this established method can be used to interpret the relationship between soil series.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.388-395
• /
• 2016

This paper explores the photocatalytic sensitivity of cement mortar incorporated with recycled $TiO_2$ from waste water sludge. Basically, $TiO_2$ cluster sank down slowly to the bottom of cement mortar specimen before setting and hardening process. This leads the mismatch of $TiO_2$ concentration on the top and the bottom faces of a specimen. This poorly dispersed $TiO_2$-cement mortar naturally exhibits poor NOx removal efficiency especially on the top of cementitious structure. In architectural engineering application such as building or housing structures, one can simply filp over from the bottom so that more $TiO_2$ concentrated surface can be placed outward into the air. However, in highway pavement case, this could not be applicable due to in-situ installation of concrete pavement. Hence, the dispersion of $TiO_2$ cluster inside the cementitous material is getting important issue onto road construction application. To elaborate this issue, according to our results, silica fume, high-ranged water reducer, viscosity agent, blast furnace slag were not enhanced much of dispersion characteristics of $TiO_2$ cluster. The combination of foaming agent and accelerator of hardening with viscosity agent and small grain size of fine aggregate may help the dispersion of $TiO_2$ inside cementitious materials. Even though the enhanced dispersion were applied to the specimen, NOx removal efficiency doest not change much for the top surface of the specimen. This concurrently affected by the presence of tiny air voids and the dispersion of $TiO_2$ in that these voids could easily adsorbed NOx gas with the aid of large surface area.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.29-36
• /
• 1995

Load testis are executed on model reticulated root piles (RRP) to figure out the optimum slanting angle in the piles installation. One set of model RRP consists of 8 slanting piles which are installed in circular patterns forming two concentric circles, each of which is made by 4 piles. Each pile which is a steel bar of 5m in diameter and 300mm in length is coated to become a pile of 6.5mm in diameter. The slanting angle of the model RRP varies from 0$^{\circ}$ to 20$^{\circ}$ Comparing ultimate bearing capacities of the model RRP of different installation angles, it is observed that the ultimate capacities of the RRP increase as the installation angle increases until 15$^{\circ}$, and the optimum slanting angle of the RRP is around 15$^{\circ}$ The ultimate bearing capacity of the 15$^{\circ}$-RRP is found to be 22% bigger than that of the vertical RRP and 120% bigger than that of the circular surface footing whose diameter is same with the circle formed by outer root piles'heads. However, it is noticed that when the slanting angle of the RRP is increased over 15$^{\circ}$, the ultimate capacity starts to be reduced. The ultimate capacity of 20$^{\circ}$-RRP is even smaller than that of the vertical RRP by as much as 5%. From the observation of the load settlement curve obtained during the RRP load tests, it is known that as the slanting angle gets bigger the load -settlement behavior becomes more ductile.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.43-71
• /
• 1999

This research is an experimental work of developing a construction material using municipal wastewater sludge as liner and cover materials for waste disposal landfill. Weathered granite soil and flyash, produced as a by-product in the power plant, were used as the primary additives to improve geotechnical engineering properties of sludge. For secondary additives, bentonite and cement were mixed with sludge to decrease the permeability and to increase the shear strength, respectively. Various laboratory test required to evaluate the design criteria for liner and cover materials, were carried out by changing the mixing ratio of sludge with the additives. Basic soil properties such as specific gravity, grain size distribution, liquid and plastic limits were measured to analyze their effects on permeability, compaction, compressibility and shear strength properties of mixtures. Laboratory compaction tests were conducted to find the maximum dry densities and the optimum moisture contents of mixtures, and their effectiveness of compaction in field was consequently evaluated. Permeability tests of variable heads with compacted samples, and the stress-controlled consolidation tests with measuring permeabilities of samples during consolidation process were performed to obtain permeability, and to find the compressibility as well as consolidational coefficients of mixtures, respectively. To evaluate the long term stability of sludges, creep tests were also conducted in parallel with permeability tests of variable heads. On the other hand, for the compacted sludge decomposed for a month, permeability tests were carried out to investigate the effect of decomposition of organic matters in sludges on its permeability. Direct shear tests were performed to evaluate the shear strength parameters of mixed sludge with weathered granite, flyash and bentonite. For the mixture of sludge with cement, unconfined compression tests were carried out to find their strength with varying mixing ratio and curing time. On the other hand, CBR tests for compacted specimen were also conducted to evaluate the trafficability of mixtures. Various test results with mixtures were assessed to evaluate whether their properties meet the requirements as liner and cover materials in waste disposal landfill.

• Geophysics and Geophysical Exploration
• /
• v.13 no.4
• /
• pp.357-363
• /
• 2010

In this study, we investigated the geologic structure of the basement and overlying sediments of the construction site of the dinosaur egg fossil museum in Hwasung, Gyeonggi Province through refraction seismology, drilling, and downward seismic velocity measurements in the drill holes. The construction site ($350{\times}750\;m^2$) is located in the reclaimed area south of Sihwa Lake, Gojeong-ri. About 6,950 m of seismic refraction data consisting of 11 lines were acquired using a sledge hammer source. Drilling to the basement was performed at five sites. Sediment samples from drilling were analysed for grain-size distribution and age dating. At two drill holes, seismic velocity was measured with depth using a hammer as a seismic source. The geological structure of the study area consists of, from top to bottom, a tidal flat layer (5 ~ 12 m thick), a weathered soil layer (2 ~ 8 m thick), and the basement. The basement is interpreted as Cretaceous sedimentary rocks that tend to be shallow eastward. The volume of the tidal flat sediments and weathered soil in the study area is estimated as $1.4{\times}10^6\;m^3$, weighing $3.5{\times}10^6$ tons. The rate of sea level rise since 8,000 yrs BP is estimated to be 0.1 ~ 0.15 cm/yr.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.61-71
• /
• 1971

This study was conducted in order to investigate the effects of slaked lime and borax on the Akiochi paddy field. The pot trial(slaked lime was treated 0, 6, 10, 15g and borax 0, 0.75, 1.5g per pot) and the field trial(slaked lime was treated 0, 100, 200kg and borax 0, 10, 30, 50kg per 10are) respectively. The results are summarized as fo11ows. I. Pot Trial: 1. In a heavy treated of borax, appeared chlorosis on whole leaves(bottom) in early growing stage, However, in about 25 days after transplanting, these chlorosis were disappeared gradually. And in proportion to close by maturity after the ear-heading, changed to dark brown color and rolled at the end of upper leaves, finally withered. At the same time the part of the end of grains was also colored to dark brown. 2. Slaked lime effected to increase the ti1lering, hence increased the number of ear, on the other hand, borax showed the tendency of repression the tillering, conversely. 3. Borax effected to hurried up to heading date of rice plant, to which borax had been the plot of B$_1$ to 3 days and B$_2$ to 5 days, hurried up than control respectively, regardless of the quantities of slaked lime application. 4. According to the application of borax, the length of culm were shortened, otherwise the length of panicle were longished, then no recognized the. independent effect of slaked lime. 5. The number of grains per panicle were seemed like increased by treatment of slaked lime, but the grain were decreased in the heavy treatment of slaked lime and borax. These phenomena were showed in ratio of maturity likely tendency as above. 6. In the 1, 000 grains weight of brown rice, in the case of slaked lime was almost no significant, otherwise by increase the application of borax, increased the weight of 1, 000 grains and the size of the grains was greater. 7. The weight of rough rice and straw were showed the same tendency as the number of grains and maturity ratio. particularly, showed the phenomenon of the reduction by the heavy application of borax. II. Field trial: 1. In a heavy treated of borax, appeared chlorosis in a early growing stage, according to close by maturiting date after the ear-heading changed to dark brown the end of upper leaves, finally dried. 2. Slaked lime application accelerated the growth and increased the number of ear, but borax showed the tendency of repression the tillering. 3. Borax effected to hurried up to heading date of rice plant, according to heavy treatment of borax quickened heading date for 4 to 5 days. 4. As a whole, culm length was repressed by borax treatment. 5. Borax application 10kg per 10are advanced progress the maturity, but in the case of above 30kg per 10are of borax showed the tendency obstruction the maturity. 6. The yield of rough rice and brown rice recognized the independent effect of slaked lime and borax, respectively. the yield was decreased by the abundant of borax.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.2
• /
• pp.177-186
• /
• 2010

This study was carried out to compare the physicochemical characteristics and preference as a sensory quality of Sogokju (Korean traditional rice wine) from waxy rice varieties. The protein and moisture contents of milled waxy rice varieties were ranged 6.9~7.2% and 12.1~ 12.6%, respectively. Nunbora had the largest grain size. In pasting properties, Hangangchalbyeo had the highest peak, trough and final viscosities, and Dongjinchalbyeo had the lowest viscosity curve. These differences suppose to be caused by the amylopectin(AP) structure: Dongjinchalbyeo has the largest short AP chains (degree of polymerization (DP) 6-12) and the smallest middle AP chains (DP 13-24) in 9 waxy rice varieties, while Hangangchalbyeo has the smallest short AP chains and the largest middle AP chains. The alcohol contents of Sogokju brewed from 9 waxy rice varieties were 17.6～19.9%. The brix degree were ranged $20.5{\sim}23.9^{\circ}Bx$. The organic acid of Sogokju consisted mainly of succinic acid, and the free sugar of it consisted mostly of glucose. The sensory evaluation showed the highest palatability at the Sogokju from Baegseolchalbyeo. The palatability was positively correlated with the brix degree, the glucose content, and the turbidity, and negatively correlated with the production yield of Sogokju.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.11
• /
• pp.1180-1185
• /
• 2006

Lab-scale batch experiments using several 25-L transparent acrylic reactors were conducted to develop optimum capping materials that can reduce phosphorus released from polluted sediments. The sediment used in the experiment was very fine clay(8.8 $\Phi$ in mean grain size), and organic carbon($C_{org}$) content was as high as 2%. Four kinds of batches with different capping materials Brucite($Mg(OH)_2$), Sea sand($SiO_2$), Granular-gypsum($CaSO_4{\cdot}2H_2O$), Double layer(brucite+sand), and one control batch were operated for 30 days. Phosphorus fluxes released from bottom sediments in the control batch were estimated to be 14.6 $mg{\cdot}m^{-2}{\cdot}d^{-1}$, while 9.5 $mg{\cdot}m^{-2}{\cdot}d^{-1}$, 5.2 $mg{\cdot}m^{-2}{\cdot}d^{-1}$, 4.2 $mg{\cdot}m^{-2}{\cdot}d^{-1}$, and 3.1 $mg{\cdot}m^{-2}{\cdot}d^{-1}$ in the batch capped with Sea sand, Granular-gypsum, Double layer, and Brucite, respectively. The results obtained from lab-scale batch experiments show that there were 70% reduction of phosphorus for some materials such as Brucite, Double layer(brucite+sand), and whereas sea sand only about 35%. The pH range of surface sediment to which Brucite was applied showed about $8.0{\sim}9.5$ in the weak alkaline state. This effect can prevent liberation of $H_2O$. The addition of gypsum into the sediment can reduce the progress of methanogenesis because of fast early diagenesis and sufficient supply of $SO_4^{2-}$ to the sediments, stimulate the SRB highly. Therefore, the application of Brucite and Gypsum can reduce phosphorus release from the sediment as a result of formation of $Mg_5(OH)(PO_4)_3$, pyrite($FeS_x$), and apatite-mineral.

• Economic and Environmental Geology
• /
• v.27 no.6
• /
• pp.523-535
• /
• 1994

The strata-bound type iron ore bodies in the Chungju mine are interbedded with metamorphic rocks which are intruded by Mesozoic granitic rocks. The iron ore deposit occurs as layer or lens shape which are concordant with the metamorphic rocks. The iron ore is classified into banded and massive types based on the mode of texture and occurrence. Grain size and iron-oxides tend to become coarser toward massive ore than banded ore. Banded ores commonly contain internal layers defined by alternating magnetite- rich, hematite-rich, magnetite-hematite, and quartz-rich mesobands. The banded iron ore consists of hematite, magnetite, quartz, feldspar, and minor amounts of biotite, muscovite, chlorite, carbonates, epidote, allanite, and zircon. Massive ores which are characterized by high magnetite content occur in contact of granitic rocks. The massive iron ores consist mostly of magnetite and quartz, with minor amounts of hematite, pyrite, microcline, biotite, muscovite, chlorite, carbonates, epidote, allanite and zircon. Magnetite from banded and massive ores is almost pure $Fe_3O_4$ in composition, including 0.14 to 0.27 wt.% MnO and 0.10 to 0.15 wt.% MnO, respectively. Hematite of the ore contains 0.87 to 1.27 wt.% $TiO_2$ in banded ore and 3.44 to 6.96 wt.% $TiO_2$ in massive ore, respectively. Biotite shows a little compositional variation depending on ore types. Biotite of the banded ore has lower FeO, $TiO_2$ and $Al_2O_3$, and higher MgO and $SiO_2$ than the massive ore. The modes of occurrence and petrography of ore implies that massive ores might have been formed either under more reducing environments or higher temperature condition than banded ore. Banded ores might represent early episode of iron enrichment due to regional metamorphism. Massive ores might be related to the contact metamorphism resulting from late granitic intrusion.

• Korean Journal of Organic Agriculture
• /
• v.19 no.3
• /
• pp.357-372
• /
• 2011

We carried out the experiment to select the suitable sprout soybean varieties for environment-friendly cultivation in paddy field of southern part area, compares of excess moisture injury degree and yield ability among 29 sprout soybean varieties. Plant growth of sprout soybean was generally low in beginning and recovered after flowering due to rainfall. In paddy field cultivation, number of pod per individual and number of seed per individual were less in difference than upland cultivation, and maturing date was delayed 5-14 days than upland cultivation in most species. When environment-friendly cultivation, pest injury was not caused major problem for the growth during the vegetative period of soybean due to ground spider as natural enemy to insect pest. However, damage of stink bugs showed severe during grain filling period, and Dawonkong, Anpyeongkong, Dachaekong and Wonhwangkong showed susceptible to sting bug. SMV infection was weak and showed some necrosis symptoms in Sokangkong, but black root rot was not infected at all. Bacterial pustule began to be infected slowly from pod enlargement stage in most species, displayed severe symptoms in Dawonkong, Pungsannamulkong, Seonamkong and Sobaeknamulkong. The symptoms of pod anthracnose, pod blight and purple spot were greatly appeared after flowering. Disease resistance varieties was Paldokong, Kwangankong, Doremikong, Somyeongkong, Pungsannamulkong, Iksa-namulkong, Seonamkong, Sojinkong, Pureunkong, Bosugkong, Namhaekong and Sorokkong. Lodging index showed 3 in Saebyeolkong, and other species displayed slight lodging in 0-3 degree. 100-seed weight is 9.8-17.2g extent and increased 0.1-3.7g than upland cultivation in most species, but decreased in some species. Government purchase standard, species correspond to small-seed-size namulkong (Sizing screen diameter 4.0-5.6 mm) was Dawonkong, Dachaekong, Bosugkong, Seonamkong, Sokangkong, Hannamkong, Somyeongkong and Wonhwangkong. Species which seed yield was higher than Pungsannamulkong (266kg/10a) were Sorokkong, Hannamkong, Bosugkong and Sowonkong. Considering sprout soybean species, disease endurance, insect resistance, lodging resistance, 100-seed weight, yield ability and excess moisture tolerances synthetically, Seonamkong, Hannamkong, Doremikong, Bosugkong, Pungwonkong, Kwangankong, Sowonkong, Dagikong, Paldokong, Eunhakong and Pungsannamulkong were promising for environment-friendly cultivation in paddy field.