• The Journal of the Korean dental association
• /
• v.15 no.2
• /
• pp.115-120
• /
• 1977

Extensive avulsion of the scalp, or stripping of a large area of soft tissue from the skull, is a serious accidnet. The avulsed scalp is often injured otherwise, such as by crushing, tearing, or from multiple laceration. The surrounding skin may be devitalized. Replacement of the scalp is usually followed by necrosis and sloughing within a short time. In such instances, the outer table of the cranium may become sucessively exposed. dry, dead, and affected by osteomyelitis. Hence the securing of early healing to prevent these is of the utmost importance. The successful case of reimplantation of the completely avulsed scalp, which is exposured to air for about 14 hours, is reported, in which there was partial growth of hair afterwards. The avulsed scalp caused by her long hair being caught in a grain belt was contaminated with hairs & dust. Authors treated this 19-year old female patient by split thickness skin graft, intermediate skin graft, full thickness skin graft from her own avulsed scalp.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.12
• /
• pp.1699-1707
• /
• 2000

Thirty-one multiparous Bos indicus${\times}$Bos taurus cows were offered concentrate supplements based on (1) 2 kg wheat bran; (2) 4 kg wheat bran; and (3) concentrate (30 maize: 67 wheat bran) at 0.5 kg per 1.0 kg milk produced, in a one year study in India. All supplements also contained 2 parts of a mineral mixture and 1 part salt. Cows were allocated to treatments at calving on parity (2nd and 3rd calf) with 13, 8 and 10 cows respectively in treatments 1, 2 and 3. They were individually fed for whole lactation, the basal diet being ad libitum berseem clover plus 2 kg wheat straw in the cool season/winter (period 1) and chopped maize in summer (period 2). Diets with berseem offered TDN and CP contents of 67.6, 18.2; 65.5, 16.8; and 67.5, 16.8 percent; and with maize fodder 62.6, 12.0; 62.6, 12.5; and 63.3, 12.5 percent for treatments 1, 2 and 3, respectively. Total dry matter (DM) intakes (1) 9.9 kg, (2) 10.9 kg and (3) 11.1 kg DM/day and intake of nutrients (TDN, CP) increased with level of supplementation (p<0.01), but effects of treatment on animal performance were not significant. Cow milk yields averaged (1) 7.9 kg, (2) 8.1 kg and (3) 8.8 kg milk/day (p>0.05) for lactation lengths of 252, 270 and 220 days (p>0.05) and cows gained +7.3; +8.1; and +12.0 kg respectively over their lactation (p>0.05). Wheat bran was used effectively as the sole energy component in concentrates for lactating dairy cows. Its use could potentially reduce feed costs and demands for cereal grain. Reduced concentrate levels may be considered if green forages of high nutrient content are fed ad libitum. Associated economic advantages or disadvantages require further evaluation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.3
• /
• pp.163-175
• /
• 1974

Effects on yields, yield components and nutrient content of potassium depression for two or three weeks at various growth stages were investigated in rice (var. Jinheung) under sand culture system.(K 40 ppm 1973) 1. Analysis of variance showed significant difference among treatments of both two-week (at p=0.01) and three-week depression (at p=0.05) in yield. 2. Most sensitive stage to potassium depression on yield appeared two weeks until heading (42% yield decrease) and sensitivity decreased the growth stage is apart from heading either before or after. During 30 days after transplanting two-week potassium depression increased yield, but three-week depression decreased yield. Until about 30 days after heading depression caused poor yield. 3. Root potassium involves in harvest index, filled grain ratio and grain weight with significant correlation and considerably in spikelet per panicle while potassium in leaf sheath+culm involves considerably in spikelet per panicle and panicle per hill. Relative total dry matter weight was significantly correlated with panicle per hill, spikelet per panicle and K or K/Ca+Mg only in leaf sheath+culm. The indications are that root potassium contributes for building sink and efficiency of structure while potassium in leaf sheat+culm primarily for building source, productive structure. 4. Relative yield was significantly correlated with potassium content in root and leaf sheath+culm and with K/Ca+Mg and its ratio before and after depression in root indicating that potassium depression occurs greatly in root and that K/Ca+Mg might have more important role than K content alone under depression. 5. Optimum level of $K_2O$ appears around 3% in leaf blade. 4% in leaf sheath+culm and 1% in root under the assumption that below these level the same content has the same role in relation to yield during growth. The K/Ca+Mg appeares to be 2.5 in root and should not decrease throughout the growth stages. 6. The increase of sodium content in plant by K depression was highest, especially in leaf sheath during the most insensitive period to K depression suggesting that insensitivity may be attributed to partial replacement of Na for K. Partial replacement seems very little in sensitive stage (later stage) and sensitive organ (root).

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.7
• /
• pp.971-978
• /
• 2016

The aim of this study was to evaluate the effect of replacing corn grain for sugar cane molasses (MO) or glucose syrup (GS) in the starter concentrate on performance and metabolism of dairy calves. Thirty-six individually housed Holstein male calves were blocked according to weight and date of birth and assigned to one of the starter feed treatments, during an 8 week study: i) starter containing 65% corn with no MO or GS (0MO); ii) starter containing 60% corn and 5% MO (5MO); iii) starter containing 55% corn and 10% MO (10MO); and iv) starter containing 60% corn and 5% GS (5GS). Animals received 4 L of milk replacer daily (20 crude protein, 16 ether extract, 12.5% solids), divided in two meals (0700 and 1700 h). Starter and water were provided ad libitum. Starter intake and fecal score were monitored daily until animals were eight weeks old. Body weight and measurements (withers height, hip width and heart girth) were measured weekly before the morning feeding. From the second week of age, blood samples were collected weekly, 2 h after the morning feeding, for glucose, ${\beta}$-hydroxybutyrate and lactate determination. Ruminal fluid was collected at 4, 6, and 8 weeks of age using an oro-ruminal probe and a suction pump for determination of pH and short-chain fatty acids (SCFA). At the end of the eighth week, animals were harvested to evaluate development of the proximal digestive tract. The composition of the starter did not affect (p>0.05) concentrate intake, weight gain, fecal score, blood parameters, and rumen development. However, treatment 5MO showed higher (p<0.05) total concentration of SCFAs, acetate and propionate than 0MO, and these treatments did not differ from 10MO and 5GS (p>0.05). Thus, it can be concluded that the replacement of corn by 5% or 10% sugar cane molasses or 5% GS on starter concentrate did not impact performance, however it has some positive effects on rumen fermentation which may be beneficial for calves with a developing rumen.

• Animal Bioscience
• /
• v.34 no.4
• /
• pp.603-612
• /
• 2021

Objective: We have tested our hypothesis that inclusion of purified glycerol as a replacer of portions of dried distillers grain with solubles (DDGS) would affect growth performance, rumen fermentation and blood parameters, carcass and sensory traits, reducing sugar and glycogen contents, and volatile compound profiles in longissimus thoracis (LT) in Korean cattle steers. Methods: A total of 20 Korean cattle steers (27.0±0.2 months old; 647±10.5 kg body weight [BW]) were assigned to a conventional control group or a glycerol group (3.17% purified glycerol addition as a replacement for DDGS and molasses). The steers were individually allowed to receive the experimental concentrate at the daily amount of 1.5% of their individual BW and a total 1.0 of kg/d of rice straw twice daily. The feeding trial was conducted for a period of 20 weeks. Results: Glycerol supplementation (GS) increased (p = 0.001) concentrate intake. However, GS did not affect (p>0.05) average daily gain, feed efficiency, and ruminal volatile fatty acid concentrations. GS tended to increase (p≤0.10) serum glucose concentrations at the 16th and 20th weeks. GS decreased (p = 0.001) LT pH. GS did not affect (p>0.05) carcass traits and the chemical or physicochemical compositions, reducing sugar or glycogen contents, sensory traits, and most of volatile compounds in the LT. Conclusion: The inclusion of purified glycerol as a replacement for DDGS in the finishing diet did not affect growth performance, rumen fermentation parameters, and carcass quality in Korean cattle. The purified glycerol could be used as a substitute for other energy sources such as DDGS in beef cattle, depending on the price.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.2
• /
• pp.187-193
• /
• 2014

As a result of the cost of grains, the replacement of grains by co-products (i.e. DDGS) in feedlot diets is a common practice. This change produces diets that contain a lower amount of starch and greater amount of fibre. Hypothetically, combining feed grade urea (U) with slow release urea (Optigen) in this type of diet should elicit a better synchrony between starch (high-rate of digestion) and fibre (low-rate of digestion) promoting a better microbial protein synthesis and ruminal digestion with increasing the digestible energy of the diet. Four cannulated Holstein steers ($213{\pm}4$ kg) were used in a $4{\times}4$ Latin square design to examine the combination of Optigen and U in a finishing diet containing different starch:acid detergent fibre ratios (S:F) on the characteristics of digestive function. Three S:F ratios (3.0, 4.5, and 6.0) were tested using a combination of U (0.80%) and Optigen (1.0%). Additionally, a treatment of 4.5 S:F ratio with urea (0.80% in ration) as the sole source of non-protein nitrogen was used to compare the effect of urea combination at same S:F ratio. The S:F ratio of the diet was manipulated by replacing the corn grain by dried distillers grain with solubles and roughage. Urea combination did not affect ruminal pH. The S:F ratio did not affect ruminal pH at 0 and 2 h post-feeding but, at 4 and 6 h, the ruminal pH decreased as the S:F ratio increased (linear, p<0.05). Ruminal digestion of OM, starch and feed N were not affected by urea combination or S:F ratio. The urea combination did not affect ADF ruminal digestion. ADF ruminal digestion decreased linearly (p = 0.02) as the S:F ratio increased. Compared to the urea treatment (p<0.05) and within the urea combination treatment (quadratic, p<0.01), the flow of microbial nitrogen (MN) to the small intestine and ruminal microbial efficiency were greater for the urea combination at a S:F ratio of 4.5. Irrespective of the S:F ratio, the urea combination improved (2.8%, p = 0.02) postruminal N digestion. As S:F ratio increased, OM digestion increased, but ADF total tract digestion decreased. The combination of urea at 4.5 S:F improved (2%, p = 0.04) the digestible energy (DE) more than expected. Combining urea and Optigen resulted in positive effects on the MN flow and DE of the diet, but apparently these advantages are observed only when there is a certain proportion of starch:ADF in the diet.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.235-243
• /
• 2002

Ni-base superalloys are used extensively in industry, both in aeroengines and land based turbines. About 60% by weight of most modern gas turbine engine structural components are made of Ni-base superalloys. To satisfy practical demands, the efficiency of gas turbine engines has been steadily and systematically increased by design modifications to handle higher turbine inlet or firing temperatures. However, the increase in operating temperatures has lead to a decrease in the life of components and increase in costs of replacement. Moreover, around 80% of the large frame size industrial/utility gas turbines operating in the world today were installed in the mid-sixties to early seventies and are now 25 to 30 years old. Consequently, there are greater opportunities now to repair and refurbish the older models. Basically, there are two major factors influencing the weldability of the cast alloys: strain-age cracking and liquation cracking. Susceptibility to strain-age cracking is due to the total Ti plus AI content of the alloy; Liquation cracking is due either to the presence of low melting constituents or constitutional liquation of constituents. Though Rene 41 superalloy has 4.5wt.% total Ti and Al content and falls just below the safe limit proposed by Prager et al., controlled grain size and special heat treatments are needed to obtain crack-free welds. Varying heat treatments and filler materials were used in a laboratory study, then the actual welding of service parts was carried out to verity the possibility of crack-tree weld of components fabricated from Rene 41 superalloy. The microstructural observations indicated that there were two kinds of carbides in the FCC matrix. MC carbides were located along the grain boundaries, while M$_{23}$C$_{6}$ carbide was located both inter and intra granularly. Two kinds of filler materials, Rene 41 and Hastelloy X were used to gas tungsten arc weld a patch into the sheet metal, along with varying pre-weld heat treatments. The microstructure, hardness and tensile tests were determined. The service distressed parts were categorized into three classes: with large cracks, with medium cracks and with small or no visible cracks. No significant difference in microstructure among the specimens was observed. Specimens were cut from the corner and the straight edge of the patch repair, away from the corner. The only cracks present were found to be associated with inadequate surface preparation to remove oxidation. Guidelines for oxide removal and the welding procedures developed in the research enabled crack-free welds to be produced.d.

• Journal of Mushroom
• /
• v.14 no.1
• /
• pp.1-5
• /
• 2016

To minimize cultivation costs, prevent insect-pest infestation, and improve the production efficiency of thermophilic mushrooms, plant substrates obtained from local areas in Cambodia were used for production of both spawn and mushrooms. In this experiment, different sawdusts different organic wastes and grain ingredients and analyzed for improvement of spawn-production efficiency. Four thermophilic mushroom species, Pleurotus sajor-caju (oyster mushroom, Sambok), Ganoderma lucidum (deer horn shaped), Auricularia auricula (ear mushroom), and Lentinula edodes (shiitake), were used to identify efficient new substrates for spawn and mushroom production. Although the mycelia in the rubber tree sawdust medium showed a slightly slower growth rate (10.9 cm/15 days) than mycelia grown in grains (11.2 cm/15 days in rice seeds), rubber tree sawdust appeared to be an adequate replacement for grain spawn substrates. Th findings indicate that rubber tree sawdust, sugarcane bagasse, and acacia tree sawdust supplemented with rice bran and calcium carbonate could be new alternative the substrates for. Although sugarcane bagasse and rubber tree sawdust showed similarly high biological efficiencies (BE) of 60% and 60.8%, respectively, acacia tree sawdust exhibited relatively a low biological efficiency of 22.4%. However, it is expected that acacia sawdust has potential for the mushroom cultivation when supplemented with currently used sawdust substrates in Cambodia, because of its relatively low price. The price of the sawdust (20 kg sawdust= 6500 Riel or 1.6 USD) currently used was 6.5 times higher than the price of acacia sawdust (201000 Riel or 0.25 USD). Therefore, utilization for acacia sawdust for mushroom cultivation could become feasible as it would reduce by producing costs of mushrooms in rural areas of Cambodia.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.208-215
• /
• 1999

The creep behavior of a rapidly solidified and consolidated Al-9.45wt%Fe-4.45wt%Cr alloy were investigated in the stress range 40 to 115 MPa and temperature range 300(0.53Tm) to 441$^{\circ}C$(0.66Tm). It is of use to available aerospace and automobile industries for the improved performance of materials used at high temperature. Because Al alloys with improved creep resistance offer the potential for lower weight and reduced costs in aerospace and automobile components (e.g., structural members and engine parts) through the replacement of heavier and more costly materials, the safety in use at high temperature is good. The alloy is characterized by high stress exponents and activation energies for creep, which are greatly dependent on the stress and temperature. Because the creep stress is seen to cause a strongly significant enhancement of coarsening, the coarsening rate of the dispersed particles in all crept specimens is faster than that in isothermally annealed specimens. Dislocations connecting dispersoids are observed more cofrequently in crept specimens with higher stress and lower temperature. The creep strain rates in the power law creep regime were found to be predicted much better by the Shorty and Rosler/Arzt equation with the inclusion of a threshold stress and dislocation detachment mechanism. The dispersoids in this alloy were acting a source of void nucleation that finally leaded to ductile fracture within the grain so called intergranular. Each void was initiated, grown and failed at the dispersoids in the aluminium matrix. Grain boundary accommodation of the slip produced, which result in initiation of the void and then final transgranular fracture. Therefore, it was confirmed that these dispersoids played an important role in the fracture mechanism by the formation of $Al_{13}Fe_4$, $Al_{13}Cr_2$ and $Al_2O_3$.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.2
• /
• pp.467-475
• /
• 2015

The effects of replacement of wheat flour with laver, Pyropia yezoensis, on the bread making properties and quality characteristics of bread were evaluated. The poor baking performance which arose from dried laver addition could be compensated by using exogenous enzymes (Flavouzyme) and baking aids. Laver hydrolysate was prepared by hydrolyzing laver using Flavouzyme for 9 hrs at $50^{\circ}C$. Doughs made by addition of laver hydrolysate (8% dried laver substitution level) showed excellent baking properties. Moreover, with the addition of glucose oxidase and hydro colloidal HPMC, loaf volume and crumb grain were improved for doughs containing laver hydrolysate. Both of intermediate fermentation and final proof time for doughs containing laver hydrolysate was shorter than that for conventional dough.