• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.3
• /
• pp.250-260
• /
• 1995

In general, a sintered rod is used as a feed in the growth of crystals by the floating zone(FZ) method. The sintering condition of the feed rod affected the stability of molten zone because it influenced the interface shape between the feed and the melt during the crystal growth. In this study, rutile and ruby crystals were chosen as samples to analyze the effect of the microstructures of the feed rods. In sintering of the feed rod for the growth of rutile and ruby single crystals, the difference of grain size between the inner and the outer region of the feed rod increased with the sintering temperature and dwelling time. As a result, it altered melting behavior of the feed. The uniform grain size of the sintered rod was necessary for the optimum growing condition of crystals. The effect of pores in the feed rod was not a dominant factor to grow crystals by the FZ method, which was confirmed by growing crystals with nonsinterd rods as feeds.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.5
• /
• pp.629-632
• /
• 2004

The objectives of this study were to determine the effects of substituting bread by-product (BBP) for barley grain in high concentrate fattening diets for kids on nutrient intake, growth performance, and nutrient digestibility. Twenty-eight Baladi kids (body weight=17.1${\pm}$1.0 kg) were assigned randomly to 4 experimental finishing diets (7 kids/treatment) in a completely randomized design for 70 days. The control (CON) diet contained 20, 60, 11, 7 and 2% (DM basis) alfalfa hay, barley grain, soybean meal, corn grain, and mineral and vitamin mix, respectively. Bread by-product substituted barley grain by 10, 20 and 30% of the diet DM in the LBBP, MBBP, and HBBP diets, respectively. Dry matter intakes for the CON, LBBP and MBBP diets were similar (p>0.05; avg.=592 g/day), however, kids fed the HBBP diet had a lower (p<0.05) DM intake (451 g/day). Organic matter and CP intakes showed similar patterns to that observed for DM. Dietary treatments did not affect (p>0.05) average daily gain for kids fed the CON, LBBP and MBBP diets (avg.=150 g/day). Final body weights for kids fed the CON, LBBP and MBBP diets (avg. 27.1 kg) were greater (p<0.05) than for kids fed the HBBP diet (23.7 kg). Feed to gain ratio was greater for the CON, LBBP and MBBP diets (avg. 3.9) compared with the HBBP diet (5.0). No significant (p>0.05) effect of the dietary treatment was observed for DM, OM and NDF digestibility. Substituting BBP for barley grain up to 20% of the diet DM did not affect nutrient intake, growth performance and nutrient digestibility of kids and resulted in a decrease in feed cost.

• Journal of Animal Science and Technology
• /
• v.61 no.1
• /
• pp.18-27
• /
• 2019

With South Korea's limited capability of feed production because of its relatively small cultivable area, the country is pushed to depend on foreign feed imports despite the immensely fluctuating price of corn. Hence, intensive efforts to increase the total cultivable area in Korea like extending of farming to mountainous area is being practiced. Corn was planted in Goesan County, a mountainous area in the country. Grain and stover were harvested separately in three harvest periods: early-harvest (Aug 8), mid-harvest (Aug 18), and late-harvest (Aug 28). The nutrient composition such as dry matter (DM), crude protein (CP), crude fat (EE), organic matter (OM), neutral detergent fiber (NDF), acid detergent fiber (ADF), and non-fibrous carbohydrates (NFC) was determined after harvest. Effective degradability (ED) of the major nutrients (DM, NDF, ADF, and CP) were measured through in vitro fermentation of rumen fluid from Hanwoo (Korean cattle). pH, ammonia-N concentration, volatile fatty acid (VFA) concentration, and gas production were periodically measured at 0, 3, 6, 12, 24, 48, and 72 h. Corn grain showed higher nutrient content and ED than stover. It also had higher gas production but its pH, ammonia-N, and total VFA concentration were lower than corn stover. The best nutrient composition of corn grain was observed in early-harvest (high CP, EE, NDF, OM, NFC, and low ADF). Early-harvest of corn grain also had high effective degradability of dry matter (EDDM), effective degradability of neutral detergent fiber (EDNDF), effective degradability of acid detergent fiber (EDADF), and total VFA concentration. On the other hand, the best nutrient composition of stover was observed in mid-harvest (high DM, CP, NDF, and low ADF). EDDM, EDNDF, and EDADF were pronounced in early-harvest and mid-harvest of stover but the latter showed high total VFA concentration. Hence, early and mid-harvested corn stover and grain in a mountainous area preserved their nutrients, which led to the effective degradation of major nutrients and high VFA production.

• Fisheries and Aquatic Sciences
• /
• v.18 no.2
• /
• pp.151-158
• /
• 2015

We evaluated the effects of rice distillers dried grain (DDG) as a partial replacement for fish meal in the practical diet on growth performance, feed utilization, and body composition of juvenile olive flounder Paralichthys olivaceus. Six isonitrogenous and isocaloric diets were formulated to contain 0%, 7%, 14%, 21%, 28%, and 35% DDG (designated DDG0, DDG7, DDG14, DDG21, DDG28, and DDG35, respectively). Three replicate groups of juvenile olive flounder averaging $9.6{\pm}0.2g$ were fed one of the experimental diets to visual satiety twice daily for 8 weeks. Neither survival nor daily feed intake was affected by the dietary DDG levels. Weight gain of the flounder fed the DDG28 and DDG35 diets was lower than that of flounder fed the DDG7 diet. The feed efficiency of flounder fed the DDG28 diet was lower than that of flounder fed the DDG0, DDG7, and DDG14 diets. The protein efficiency ratio of flounder fed the DDG28 diet was lower than that of flounder fed the DDG7 diet. The proximate composition of muscle was not affected by the dietary DDG levels. The plasma contents of total protein, glucose, cholesterol, glutamate oxaloacetate transaminase, phospholipid, and triglyceride were not affected by the dietary DDG levels. The results of this experiment suggest that DDG has the potential to replace fish meal and could be used up to 21% DDG without any negative effects on the growth and feed utilization of juvenile flounder.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.1
• /
• pp.16-23
• /
• 2017

This study aimed to determine the optimal harvesting time for covered barley to make grain silage, in Honam region of Korea. We harvested six varieties of barley every third day from 24 to 42 days after heading (DAH). The moisture content decreased from 62.4% at 24 DAH to 24% at 42 DAH. The moisture content at 36 DAH was 44.3%; however, moisture content at 39 and 42 DAH was lower than 40%. Yield of covered barley significantly increased from 24 to 42 DAH (p < 0.05). Yield at 36 DAH (557 kg/10a) was not significantly different from that at 39 and 42 DAH (p < 0.05). With respect to the feed value of barley grain silage, the amount of crude fiber and crude ash was different by harvesting time (p < 0.05). However, the amount of crude protein, crude fat, and total digestible nutrients (TDN) from 24 and 42 DAH was not significantly different. The pH of grain silage from 24 to 42 DAH was between 3.8 and 4.2 and it was stable until 36 DAH (p < 0.05). However, the pH of grain silage at 39 and 42 DAH was 5.2 and 5.8, respectively, which was higher than the pH of silage with good fermentation quality. The lactic acid content of barley grain silage from 24 to 42 DAH decreased from 5.5% to 0.5% (p < 0.05). The amount of lactic acid at 36 DAH was higher than that at 39 and 42 DAH (p < 0.05). With respect to moisture content, yield, feed value, and fermentation, the optimal harvesting time for grain silage of covered barley was 36 DAH. This could increase the use efficiency of harvesting machine for barley and reduce the harvesting time gap between whole barley silage and grain silage in Korea. Moreover, using barley grain silage for animal feed could reduce the import of corn.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Korean Journal of Agricultural Science
• /
• v.35 no.1
• /
• pp.101-118
• /
• 2008

This paper reviews the present situation of Triticale cultivation and examines the potentiality of contribution to livestock as well as poultry sector in Bangladesh Agriculture. Triticale is a human-made cross between rye and durum wheat that has the ability to produce quality green fodder, and then re-grow after first and second cutting to produce grain. In Bangladesh, it is a non-traditional cereal that grows well during the cool and dry Rabi season (November-March) when fodder and feed scarcity is a major limiting factor for ruminant livestock. In Bangladesh Triticale was started to grow in the late Ninety's. The scientists of Bangladesh Agricultural Research Institute (BARI) were first introduced triticale in Bangladesh. Still now the situation of Triticale is grown as fooder and feed in Bangladesh within the scientists under trial. High quality grass fodder was obtained by cutting green triticale plants twice, at 35 and 50 days after seeding, while later the ratooning tillers produced grain to a yield of 1.1-2.4 t/ha of grain for poultry feed or human food. Triticale straw was twice as nutritious as rice or wheat straw and its grain contained more protein than other cereals. Researchers and farmers have also successfully made triticale hay and silage from a mixture of triticale green cuttings, rice straw and molasses. A feeding trial at Bangladesh Livestock Research Institute(BLRI), Savar station showed a large(46%) increase in cow live weight gain and a 36% increase in milk yield (but no change in milk quality or dry matter intake) in cows fed triticale silage compared with those fed rice straw over a period of nine weeks. In another feeding trial, it was found that triticale grain was a good replacement for wheat in the feed blend for chickens in Bangladesh. So it will be a good chance to alive our livestock as well as poultry sector if triticale enters to our existing cropping system as fodder cum grain. The challenge in Bangladesh is to identify fodder technologies that match existing small-scale farmer cropping patterns without needing major inputs or increasing risks. Preliminary field experiments revealed that triticale is a crop with good potential to produce quality fodder and grain for small scale farmers in Bangladesh.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.8
• /
• pp.1151-1157
• /
• 2003

The surfactant Tween 80 was evaluated for its ability to influence cumulative gas production, cellulose digestion, and enzyme activities by mixed ruminal microorganisms grown on barley grain or Orchardgrass hay. The addition of Tween 80 at a level of 0.10% significantly (p<0.05) decreased the cumulative gas production rate from both barley grain or Orchardgrass hay substrates. However, 0.05% Tween 80 did not affect gas production rates compared to the control treatment. The addition of 0.05% Tween 80 to cultures growing on barley grain resulted in a significant increase in cellulase (90.01%), xylanase (90.73%) and amylase (487.25%) activities after 30 h incubation. Cultures utilizing Orchardgrass hay had a significant increase in cellulase (124.43%), xylanase (108.86%) and amylase (271.22%) activities after 72 h incubation. These increases in activities were also observed with cultures supplemented with 0.10% Tween 80 throughout all the incubation times tested. These results indicated that the addition of 0.05% Tween 80 could greatly stimulate the release of some of key enzymes without decreasing cell growth rate in contrast to trends reported with aerobic microorganism. Our data indicates potential uses of the surfactant Tween 80 as a feed additive for ruminant animals.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.87-92
• /
• 1996

When cutting 2.0cm-thick red oak and hard maple with an air-jet-assisted carbon-dioxide laser of 2kW output power, maximum feed speed at the point of full penetration of the beam decreased with increasing the angle between grain and cutting direction. Feed speed averaged 3.75 and 3.38 meters per minute for red oak and hard maple, respectively. Gray-level of laser-cut surfaces were analyzed by image analysis system. The highest gray level of laser-cut surface was obtained when red oak was cut parallel to grain by laser. Surface profiler was used to scan the sawn and laser-cut surfaces. Center line average roughnesses of laser-cut surfaces were higher than those of sawn surfaces. Scanning electron micrographs showed the cell walls which were melted by laser.