• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.283-283
• /
• 2013

Because of beautiful glossy and color, the value of gold leverage is very high in Europe. To improve the quality of gold alloys, we performed heat treatment on 14 K white gold alloys by variously changing age-hardening conditions. Age-hardening behavior and the related phase transformation changes were studied to elucidate the hardening mechanism of 14 K white gold alloy. For solid solution treatment [ST], casted gold alloy specimens were treated at high temperature ($750^{\circ}C$) for 30 minutes, and the specimens dropped to water to quench them. For Age-hardening treatment [AT], the specimens were treated at various temperatures ($250{\sim}300^{\circ}C$). After the heat treatment, we observed the phenomenon to increase hardness from 126 Hv to 166 Hv by Vicker's hardness tester. Through electron probe micro-analysis (EPMA) mapping analysis, we investigated that irregular particles were changed uniformly. In the SEM and OM images, two phases of matrix and particle-likestructures were observed, and the precipitation of these elements from the matrix progressed during age-hardening. By transmission electron microscope and X-ray diffraction observation, it was revealed that the formation of the Au3Cu superstructure contributed to the age-hardening at $270^{\circ}C$ in the gold alloy. After the heat treatment, this analysis shows that casted gold alloys were to improve hardness and to moderate surface defects at specific temperatures and duration.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.322-322
• /
• 2011

White gold는 아름다운 광택과 손쉬운 가공성의 장점 때문에 장신구를 비롯한 다양한 분야에서 그 활용 가치가 매우 높다. 본 연구에서 우리는 열처리를 통한 white gold의 hardness강화 및 품질향상을 위하여 다양한 열처리 조건별 기계적 특성변화를 비교 관찰 하였다. 열처리 전 white gold alloy의 구성성분을 조사하기 위하여 EPMA와 ICP-MS를 사용하여 분석 후 그 값을 수치화 하였다. 14K, 18K White gold alloy 총 32개의 시료를 사용하여 $750^{\circ}C$, 30 min의 조건에서 solid treatment 및 quenching 후 $200^{\circ}C{\sim}350^{\circ}C$ 온도 범위에서 $50^{\circ}C$ 간격으로 age-hardening을 실시하였다. 열처리 전과 후 각 조건별 hardness 변화는 Vicker's hardness tester를 사용하여 측정하였다. 또한 age-hardening 후 모든 시료는 optical microscope (OM)을 사용하여 각 열처리 조건 별 grain 들의 배열 및 size의 변화를 관찰하였다. 열처리 전 14K, 18K white gold alloy의 hardness의 평균값은 각각 162 Hv와 196 Hv를 나타내었다. solid treatment 후 그 수치가 146 Hv, 172 Hv로 감소하였고, age-hardening 후에는 hardness 값이 점차 증가하여 14K는 $260^{\circ}C$에서 226 Hv, 18K는 $270^{\circ}C$에서 268 Hv의 가장 높은 수치를 나타내었다. 또한 14K 및 18K는 각각 $260^{\circ}C$, $270^{\circ}C$ 이상에서는 over-aging 현상을 나타내었다. OM 분석 결과 열처리 전 불균일했던 grain들의 배열이 solid treatment 및 quenching 후 다소 균일해짐을 확인할 수 있었고, grain size 또한 열처리 전에 비해 증가함을 알 수 있었다. Solid treatment 후 모든 시료의 hardness값이 전반적으로 감소하였다가 age-hardening을 통해 grain들의 배열이 점차 안정화 되면서 hardness가 증가 하였고, over-aging 구간에서는 급격히 감소하는 경향을 나타내었다. 이 결과들로부터 우리는 14K, 18K white gold alloy 에 대한 age-hardening 최적조건을 도출하였고, 각 열처리 조건별 grain 배열 상태의 변화를 관찰 할 수 있었다.

• 한국재료학회지
• /
• 제21권10호
• /
• pp.525-531
• /
• 2011

Two dimensional (2D) arrays of noble metal nanoparticles are widely used in the sensing of nanoscale biological and chemical events. Research in this area has sparked considerable interest in many fields owing to the novel optical properties, e.g., the localized surface plasmon resonance, of these metallic nanoarrays. In this paper, we report successes in fabricating 2D arrays of gold nano-islands using nanosphere lithography. The reproducibility and the effectiveness of the nano-patterning method are tested by means of spin coating and capillary force deposition. We found that the capillary force deposition method was more effective for nanospheres with diameters greater than 600 nm, whereas the spin coating method works better for nanospheres with diameters less than 600 nm. The optimal deposition parameters for both methods were reported, showing about 80% reproducibility. In addition, we characterize gold nano-island arrays both geometrically with AFM as well as optically with UV-VIS spectrometry. The AFM images revealed that the obtained nano-arrays formed a hexagonal pattern of truncated tetrahedron nano-islands. The experimental and theoretical values of the geometric parameters were compared. The 2D gold nano-arrays showed strong LSPR in the absorption spectra. As the nano-islands increased in size, the LSPR absorption bands became red-shifted. Linear dependence of the plasmon absorption maximum on the size of the gold nano-islands was identified through the increment in the plasmon absorption maximum rate for a one nanometer increase in the characteristic length of the nano-islands. We found that the 2D gold nano-arrays showed nearly seven-fold higher sensitivity of the absorption spectrum to the size of the nano-islands as compared to colloidal gold nano-particles.

• 복식
• /
• 제57권9호
• /
• pp.67-75
• /
• 2007

The purpose of this research is to conserve of golden decoration(Jikgeumdan) of Chima(skirt) and Jeogori(Korean jacket) of the costumes excavated from Hangju Gi' tomb(17th Century) of Joseon dynasty$(1392{\sim}1910)$ and to focus on the development of conservation skill to prevent flakings of gold leaves in gilt paper strips. Up to the present, in case of golden decorations of costumes excavated from tombs of Joseon dynasty, some of gold leaves in gilt paper strips of costumes were flaked away by deterioration of adhesives in tombs. However, most of gold leaves were flaked away and totally lost by wet cleaning for eliminating contaminants after excavation. In order to prevent flaking, preliminary experiments for re-adhesion of gold leaves have been carried out. Firstly, simulation was performed using gold leaf which was available in the market. Adhesives used in this research were water-soluble adhesives(hide glue(cow, rabbit), glue made from air bladders of sciaenoid fish and Primal AC-3444 of acrylic emulsion) and solvent-soluble adhesives(acrylic adhesive Paraloid B-67 and B-72). Because of difficulty in wetting and spreading of adhesive solutions into the interface between gold leaf and Korean paper, water-soluble adhesives were not proper for adhesion of gold leaf and Korean paper. Solvent-soluble adhesives were easily infiltrated into interface between gold leaf and Korean paper and the adhesive force was also satisfied. From this result, the researchers chose more flexible Paraloid B-72$(Tg\;40^{\circ}C)$ 1% solution than Paraloid B-67$(Tg\;50^{\circ}C)$ for adhesion of gold leaf and Korean paper. Secondly, using Paraloid B-72 1% solution, the estimations of re-adhesions of gold leaves in gilt paper strips of Jeogori were carried out. When Paraloid B-72 1% solution was injected three times into the interface between gold leaf and Korean paper, the re-adhesion was most effective. On the basis of the results in these preliminary experiments, re-adhesions of gold leaves in gilt paper strips of Chima and Jeogori were carried out on condition of three times injections of Paraloid B-72 1% solution before wet cleaning. After wet cleaning, the most of the gold leaves were survived, which was confirmed by both the examination with the naked eye and the microscopic examination.

• Nuclear Engineering and Technology
• /
• 제42권1호
• /
• pp.37-46
• /
• 2010

The development of advanced nuclear fuel cycle(ANFC) technology is essential to meet the national mission for energy independence via a nuclear option in Korea. The action target is to develop environmentally friendly, cost-effective measures to reduce the burden of long term disposal. The proper scenarios regarding potential radionuclide release from a repository have been developed in this study based on the advanced korean Reference Disposal System(A-KRS). To predict safety for the various scenarios, a new assessment code based on the GoldSim software has also been developed. Deterministic analysis indicates an environmental benefit from the ANFC as long as the solid waster from the ANFC act as a proper barrier.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2009년도 학술논문요약집
• /
• pp.273-274
• /
• 2009

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 2002년도 춘계학술대회
• /
• pp.75-76
• /
• 2002

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2019년도 춘계학술논문요약집
• /
• pp.155-156
• /
• 2019

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2011년도 추계학술논문요약집
• /
• pp.405-406
• /
• 2011

• 한국지구과학회지
• /
• 제22권4호
• /
• pp.278-291
• /
• 2001

설화 광산의 중열수(中熱水) 금광상은 경기육괴의 화강암류내에 발달된 북동방향 단층 전단대를 충진한 괴상의 단성 석영맥내에 배태되어 있다. 설화 중열수 금광화작용(金鑛化作用)은 쥬라기 화강암류(161Ma)와 공간적으로 관련되어 있다. 맥상 석영은 3개유형의 유체포유물(流體包有物)을 포함하고 있다: 1) 저염농도(<5wt.% NaCl)의 액상 CO$_{2}$를 배태한 type IV 유체포유물; 2) 가스가 풍부(>70vol.%)하고, 기상으로 균질화하는 type II 유체포유물; 3) 소량의 CO$_{2}$를 포함하는 저내지 중염농도(0${\sim}$15 wt.% NaCl)의 type I 유체포유물. H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl계 유체포유물은 250${\circ}\;{\sim}$430${\circ}$C 온도와 1kbar 압력에 해당되는 액상선을 따라 초기에 포획된 불혼화 유체를 지시한다. 정밀 유체포유물 연구에의하면, 함금 광화작용중 점진적인 압력감소가 발생했음을 알 수 있다. 수용성 포유물의 유체는 온도 및 압력감소로 인한 균질한 H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl계 유체로부터 광역적인 유체의 불혼화(CO$_{2}-CH$_{4}$ 비등)작용을 거쳐 진화된 후기 유체이거나, 광화지역의 융기 및 삭박과 관련된 심부순환천수의 영향을 받았던 것으로 추정된다. 초기 유체는 균질한 H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl계 유체로서 다음과 같은 특성을 보인다: >250$^{\circ}$${\sim}$430$^{\circ}$C, 0.16${\sim}$0.62의 X$_{CO}\;_{2}$, 5${\sim}$14mole% CH$_{4}$, 0.06${\sim}$0.31mole% N$_{2}$, 0.4${\sim}$4.9wt.% NaCl의 염농도. 설화 금광산의 온도-조성 자료는 설화 함금열수계가 화강암질 용융체와 인접한 부분에 정치되어 있었음을 지시한다. 이러한 화강암질 용융체는 CH$_{4}$ 형성을 촉진시켜 유체를 환원상태로 변환시킨 것으로 추정된다. 철황화물중 자류철석이 지배적으로 산출됨은 환원유체 상태를 지시하고 있다. 황화광물의 ${\delta}\;^{34}$S값(-0.6 ${\sim}$ 1.4$%_o$)은 황의 심부 화성기원을 지시하고 있다.