• 제목/요약/키워드: Gold-Silver Alloy

검색결과 40건 처리시간 0.024초

Investigating the Au-Cu thick layers Electrodeposition Rate with Pulsed Current by Optimization of the Operation Condition

  • Babaei, Hamid;Khosravi, Morteza;Sovizi, Mohamad Reza;Khorramie, Saeid Abedini
    • Journal of Electrochemical Science and Technology
    • /
    • 제11권2호
    • /
    • pp.172-179
    • /
    • 2020
  • The impact of effective parameters on the electrodeposition rate optimization of Au-Cu alloy at high thicknesses on the silver substrate was investigated in the present study. After ensuring the formation of gold alloy deposits with the desired and standard percentage of gold with the cartage of 18K and other standard karats that should be observed in the manufacturing of the gold and jewelry artifacts, comparing the rate of gold-copper deposition by direct and pulsed current was done. The rate of deposition with pulse current was significantly higher than direct current. In this process, the duty cycle parameter was effectively optimized by the "one factor at a time" method to achieve maximum deposition rate. Particular parameters in this work were direct and pulse current densities, bath temperature, concentration of gold and cyanide ions in electrolyte, pH, agitation and wetting agent additive. Scanning electron microscopy (SEM) and surface chemical analysis system (EDS) were used to study the effect of deposition on the cross-sections of the formed layers. The results revealed that the Au-Cu alloy layer formed with concentrations of 6gr·L-1 Au, 55gr·L-1 Cu, 24 gr·L-1 KCN and 1 ml·L-1 Lauryl dimethyl amine oxide (LDAO) in the 0.6 mA·cm-2 average current density and 30% duty cycle, had 0.841 ㎛·min-1 Which was the highest deposition rate. The use of electrodeposition of pure and alloy gold thick layers as a production method can reduce the use of gold metal in the production of hallow gold artifacts, create sophisticated and unique models, and diversify production by maintaining standard karats, hardness, thickness and mechanical strength. This will not only make the process economical, it will also provide significant added value to the gold artifacts. By pulsating of currents and increasing the duty cycle means reducing the pulse off-time, and if the pulse off-time becomes too short, the electric double layer would not have sufficient growth time, and its thickness decreases. These results show the effect of pulsed current on increasing the electrodeposition rate of Au-Cu alloy confirming the previous studies on the effect of pulsed current on increasing the deposition rate of Au-Cu alloy.

도재 소부용 팔라디움계 합금의 도재 결합양상에 관한 연구 (A STUDY ON THE BONDING BEHAVIOR OF PALLADIUM-BASED ALLOYS FOR CERAMO-MENTAL RESTORATION)

  • 장훈;임호남;최부병
    • 대한치과보철학회지
    • /
    • 제27권1호
    • /
    • pp.143-179
    • /
    • 1989
  • To observe the bonding behavior of palladium-based alloys to porcelain; 1. Pd-Co binary alloy with the higher cobalt content, 2. Pd-Co binary alloy with the lower cobalt content, 3. Pd-Ag-Sn ternary alloy, 4. Pd-Ag binary alloy, 5. Pd-Cu-Au ternary alloy and 6. Pd-Cu binary alloy were made as 6 groups of experimental alloys. Each group of alloy was divided into 4 sub-groups such as one sub-group that was not degassed and three sub-groups that degassed for 5 minutes, 10 minutes and 15 minutes. On each specimen, weight changes after degassing, morphological changes of oxide layer by changing the degassing time, compositional changes at metal-ceramic interface and bond strength of metal-ceramic measured with planar shear test were observed and compared. The results of the present study allow the following conclusions to be drawn: 1. The alloy showing the greatest bond strength was Pd-Cu alloy without gold and bond strength was decreased by alloying gold to them. 2. Although Pd-Co alloy showed the most prominent oxidation behavior, bond strength of them to porcelain was not greatly high by the formation of porosities at metal-ceramic interfaces. 3. Likewise tin, cobalt formed the peaks on line profiles at metal-ceramic interface, however copper did not exhibit such peaks on line profiles. 4. Mainly, oxide layer on Pd-Co alloy was composed with cobalt, and for Pd-Co alloy with higher cobalt content the rise of bond strength was not significant by increased degassing time. 5. On Pd-Ag alloy not containing tin, during degassing for 15 minutes silver content was increased at metal-ceramic interface. 6. As an oxidized element, tin formed the oxide layers that widen their area by increasing the degassing time, while cobalt and copper showed the morphological changes of particle or crystal on oxide layer.

  • PDF

A Study on the Electrical Characteristics of Different Wire Materials

  • Jeong, Chi-Hyeon;Ahn, Billy;Ray, Coronado;Kai, Liu;Hlaing, Ma Phoo Pwint;Park, Susan;Kim, Gwang
    • 마이크로전자및패키징학회지
    • /
    • 제20권4호
    • /
    • pp.47-52
    • /
    • 2013
  • Gold wire has long been used as a proven method of connecting a silicon die to a substrate in wide variety of package types, delivering high yield and productivity. However, with the high price of gold, the semiconductor packaging industry has been implementing an alternate wire material. These materials may include silver (Ag) or copper (Cu) alloys as an alternative to save material cost and maintain electrical performance. This paper will analyze and compare the electrical characteristics of several wire types. For the study, typical 0.6 mil, 0.8 mil and 1.0 mil diameter wires were selected from various alloy types (2N gold, Palladium (Pd) coated/doped copper, 88% and 96% silver) as well as respective pure metallic wires for comparison. Each wire model was validated by comparing it to electromagnetic simulation results and measurement data. Measurements from the implemented test boards were done using a vector network analyzer (VNA) and probe station setup. The test board layout consisted of three parts: 1. Analysis of the diameter, length and material characteristic of each wire; 2. Comparison between a microstrip line and the wire to microstrip line transition; and 3. Analysis of the wire's cross-talk. These areas will be discussed in detail along with all the extracted results from each type the wire.

미륵사지 출토 고대 금동유물의도금기법에 관한 연구 (Study for the Film Coating Techniqur of Gilt Bronze Artifacts from Mir ksa Temple)

  • 임선기;강대일;김선덕;박동규;강성군
    • 보존과학연구
    • /
    • 통권14호
    • /
    • pp.45-76
    • /
    • 1993
  • Au-Cu alloyed coating layer were found by Hg-amalgam process and it seemed to be used Cu-amalgam process similar to Au-amalgam. Coated layer is dense and unique, Thickness of layer was 1.5 to $18.0\mum$ which had 95.3 to 99.8% purity of gold Matrix metal mostly cosists of forged copper alloy which had high purity and ferrite ($\alpha$) strusture. It showed excellent refining technical level at that time. Aowever, the nail, ferrous matrix used for strength needed, composed of silver foil packed and gold layer for adherence between ferrous matrix and gold layer

  • PDF

고대 금동유물의 금도금(金鍍金) 피막(被膜)에 관한 연구 (A Study on the Gold Film Coated on the Ancient Gilt Bronze)

  • 임선기;강성군
    • 보존과학회지
    • /
    • 제1권1호
    • /
    • pp.60-79
    • /
    • 1992
  • In relation to the scientific conservation treatment of ancient gilt bronze, the gold film coated on the bronze excavated from Hwangnam Great Tomb of Old Silla Kingdom(A. D. 5C) was studied in the view of coating technology and metallurgy of bronze. The uniform and dense gold film containing $2.44\sim12.40%$ of Hg with the thickness of $5.99\sim12.97{\mu}m$ was found to be coated on the bronze objects by amalgam coating method. On silver objects, the film with the thickness of $19.96{\mu}m$ was coated also continously and uniformly with gold by the same method. The bronze objects was fabricated by forging technique and contained almost $4.7\sim11.5%$ of Pb. Its microstructure was $\alpha-phase$ solid solution including Pb segregation in the matrix. The amount of $0.4\sim2.0%$ Zn was added in the bronze for the purpose of easy fabricating of Cu alloy. Based on the data studied, the gold film on bronze sample was reproduced by amalgam coating method and compared with the ancient gold film.

  • PDF

치과용 합금의 표면 처리가 글라스아이오노머 시멘트와 폴리카르복실레이트 시멘트의 결합력에 미치는 영향 (INFLUENCE OF SURFACE TREATMENTS OF DENIAL ALLOYS ON BOND STRENGTH OF GLASS IONOMER AND POLYCARBOXYLATE CEMENT)

  • 이헌우;우이형;임호남;최부병
    • 대한치과보철학회지
    • /
    • 제34권1호
    • /
    • pp.125-142
    • /
    • 1996
  • Bond strength of four different cements to dental casting alloys which were treated with #600 emery, tin-plating, and $50{\mu}m$ sandblasting were evaluated. The alloy specimens were Type III Gold alloy(Degulor C), Palladium-Silver alloy(Pors on 4), Nickel-Chromium(Rexillium III) alloy, which were embedded in acrylic resin disc. The specimens were treated with #600 emery and tin plating, #600 emery and sandblasting, then bonded using Fuji I, Ketac Cem(Glass ionomer cements), Poly F, Livcarbo(Polycarboxylate cements). The specimens were immersed in water for 24 hours and shear bond strengths were evaluated by Instron Machine. Tin plated, sandblasted, and debonded alloy surfaces were observed using scanning electron microscope. On the basis of this study, the following conclusions could be drawn. 1. In the tin plated alloy group, increase in bond strength of glass ionomer cements was statistically insignificant. 2. In the tin plated alloy group, increase in bond strength of polycarboxylate cements was statistically significant, except nickel-chromium alloy. 3. Sandblasted alloy group showed higher bond strength than that of tin-plated alloy group.

  • PDF

경주 계림로 14호분 장식보검 금립의 접합방법에 관한 고찰 (Ornamented Dagger Sheath from Gyerim-ro Tomb No.14, Gyeongju: On the Joining Process of Gold Granules)

  • 유혜선
    • 박물관보존과학
    • /
    • 제16권
    • /
    • pp.4-13
    • /
    • 2015
  • 지금까지 한반도에서 출토된 누금세공유물의 접합방법을 살펴보면 금과 은을 합금한 재료를 사용한 금납법으로 접합한 경우가 대부분이다. 경주 보문동합장분 출토 금제태환이식(국보 제90호), 호암미술관 소장 금제세환이식과 금제태환이식(보물 제557호) 그리고 통일신라시대 감은사지 동삼층석탑 출토 금제풍탁(金製風鐸) 등에서 확인되었다. 그러나 경주 계림로 14호묘 출토 장식보검(裝飾寶劍)의 금립 접합방법은 지금까지 확인된 방식과는 다르다는 것을 SEM-EDS 분석으로 알 수 있었다. 계림로 장식보검의 금립은 크기와 형태가 매우 고르고, 표면에 수지상 조직(樹枝狀組織)을 갖고 있다. 순수한 금속에서는 이 수지상 조직이 나타나지 않으며, 합금된 물질의 특징이라고 할 수 있다. 실제로 금립의 조성은 Au 77wt%, Ag 18wt%, Cu 4wt%의 3원계 합금물질이다. 이 성분 특성(합금 금속)으로 인하여 순수한 금의 녹는점인 1064℃ 보다 훨씬 더 낮은 온도인 1000℃ 미만(약 980℃)에서도 금속의 용해가 가능하게 된다. 그러므로 금땜이나 다른 매개물을 전혀 사용하지 않고도 순간적으로 고온을 가하게 되면 금립의 접합이 가능하게 된다. 그리고 SEM 이미지 관찰에서도 땜의 흔적을 전혀 찾아 볼 수 없는 것으로 보아 융접법에 의한 접합이 이루어진 것으로 추정된다.

오동상감(烏銅象嵌)기법을 활용한 장도(粧刀)의 제작기술 및 복원연구 (Jangdo(Small Ornamental Knives) manufacturing process and restoration research using Odong Inlay application)

  • 윤용현;조남철;정영상;장추남
    • 헤리티지:역사와 과학
    • /
    • 제49권2호
    • /
    • pp.172-189
    • /
    • 2016
  • 본 연구에서는 "오주서종박물고변(五洲書種博物考辯)", "천공개물(天工開物)" 등 고문헌에 기록된 오동 재료와 합금비, 주조 시설, 주조법 등을 확인하고 이를 기초자료로 활용하여 오동상감기법으로 장도를 제작하였다. 오동상감기법 장도 제작은 크게 오동 합금, 은땜 합금, 오동판과 은판 제작, 칼자루와 칼집 제작, 장도의 장석인 두겁 및 부속품 제작, 오동 상감, 조립의 순으로 진행하였다. 오동의 합금은 "오주서종박물고변"에 보이는 상품(上品)으로 전통방식의 진오동(眞烏銅) 합금비인 구리와 금을 20:1의 중량비로 하였다. 은땜의 합금은 상감된 문양에 사용한 경우 은과 황동(Cu 7 : Zn 3)을 중량비 5:1로, 단순 접합 사용한 경우에는 은과 황동을 중량비 5:2로 합금하여 은땜판을 제작하였다. 칼집과 칼자루 제작은 진오동 합금비로 만든 오동 괴를 풀림과 단조작업을 실시하여 오동판의 두께를 0.6mm로, 오동의 뒷면인 은판도 두께 0.6mm로 제작한 뒤, 오동판과 은판 접합, 풀림과 단조, 오동판에 문양 새기기, 은 상감하기, 오동판으로 칼집과 칼자루 모양잡기, 은땜으로 접합하기, 연마 및 광택내기 등의 과정을 거쳐 완성하였다. 붉은색의 오동판 표면을 검은색으로 부식시키는 '오동 살리기(발색하기)'는 오동 합금의 품위에 따라 발색 효과가 차이가 난다. 한지를 30일 정도 썩힌 인뇨(人尿)에 적셔 칼집과 칼자루 등에 감아 따뜻한 곳($25^{\circ}C$ 이상)에 두고 2~3시간이 경과하면 오동판의 겉면만 검은색으로 발색되고 은이 상감된 문양은 그대로 있어 오동상감기법을 재현할 수 있었다. 오동상감 복원에 사용했던 오동판, 은판, 은땜판의 합금성분과 오동의 표면 발색성분을 알기 위해 과학분석을 실시하였다. 오동 합금 분석(시료 2개)결과 고문헌 기록(Cu 95wt%, Au 5wt%)과 평균성분비가 유사한 Cu 95.57wt%, Au 4.16wt%과 차이가 있는 Cu 98.04wt%, Au 1.95wt%로 검출되었는데, 전자는 오동판 가공에 성공률이 높은 반면, 후자는 가공과정에서 터지는 등의 실패가 있었다. 오동판과 은판이 부착된 시료의 성분분석 결과 은판 부분은 Ag 100wt%로 검출되었고, 오동판과 은판이 접합된 부분은 Cu, Ag, Au가 모두 검출되어 접합이 잘 되었음을 확인할 수 있었다. 은과 황동을 합금한 은땜판은 분석결과 Ag 성분이 다양하게 검출되고 있어 성분비와 관계없이 매우 불균질하게 섞여있음을 관찰하였다. 오동판에 검은색으로 발색된 부분의 성분분석 결과 소지 금속에서 검출되지 않았던 S의 함량이 검출되어 S의 함량이 오동 색상에 영향을 미친 것으로 판단되었다. 향후 발색에 대한 정확한 메커니즘을 밝히기 위해서는 추가적인 화합물, 색도 및 재현 연구 등 추가연구가 필요하다. 이번 연구를 통해 시도 및 확인된 고문헌 속의 오동합금 실험 및 재현, 오동상감기법에 의한 장도제작, 오동판 검은색 발색 메커니즘의 과학 분석결과 등은 오동상감기법의 복원을 위한 중요한 기초자료로 활용될 수 있을 것이다.

비파괴분석법에 의한 은제금도금유물의 판단을 위한 비교실험 연구 (A Study on Comparison Experiments for Judgement to the Nondestructive Analysis of Gold Plated Silverware Remains)

  • 심명보;유혜선;김수기
    • 보존과학회지
    • /
    • 제27권1호
    • /
    • pp.41-47
    • /
    • 2011
  • 은 소지 위에 금을 도금한 은제금도금유물을 대상으로 성분분석을 위해 X선 형광 분석기를 이용하여 비파괴분석을 실시하면 소지금속인 Ag에서 전자궤도에 따라 무게백분율(wt.%)의 값이 큰 차이가 나타나는 특이점을 확인할 수 있다. 이러한 특이점을 이용하여 육안으로는 파악하기 쉽지 않은 유물에서도 은제금도금기법이 사용되었는지를 판단할 수 있는 근거를 제시하고자 재현시료를 제작하여 비교분석을 실시하였다. 그 결과 수은아말감도금법과 전기도금법으로 제작된 시료에서는 실제 유물들의 분석결과와 같은 결과를 볼 수 있었다. 하지만 금은합금시료의 경우 도금시료와는 달리 주성분들의 전자궤도에 따른 차이가 미미한 것을 확인할 수 있었다. 도금시료에서 나타나는 이러한 원인으로는 단일재료가 아닌 도금으로 인한 이중구조에 의해 도금층에서 XRF 빔을 흡수하면서 발생하는 것으로 보인다. 따라서 비파괴분석에서 나타나는 이러한 결과를 이용한다면 단면을 관찰하지 않아도 은제금도금 기법의 사용 여부를 판단할 수 있을 것으로 확인하였다.

한국산(韓國産) 치과주조용(齒科鑄造用) 저금함유합금(低金含有合金)의 조성(組成) 및 기계적(機械的) 성질(性質)에 관(關)한 비교연구(比較硏究) (A COMPARATIVE STUDY ON THE CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES OF FOUR LOW-GOLD-CONTENT DENTAL CASTING ALLOYS MANUFACTURED IN KOREA)

  • 장익태;양재호;김창회;김광남;이선형;김영수;장완식
    • 대한치과보철학회지
    • /
    • 제19권1호
    • /
    • pp.17-27
    • /
    • 1981
  • This study was conducted to determine the chemical composition and the mechanical properties of four commercially available low gold-based crown and bridge alloy produced in Korea. Four dental casting gold-silver-palladium alloys, i.e., A, B, C and D (code of alloys) were selected for the evaluation of chemical composition, ultimate tensile strength, elongation. values and Vickers hardness. The chemical composition of test specimens was analyzed by both emission spectrography and wet gravitation method with a 1.5gm of low gold ingot. The tensile properties and Vickers hardness was determined with cast specimens treated in following three conditions; as-cast, softening heat treatment and hardening heat treatment. The tensile testing bars were cast in accordance with the model designed by Gettleman and Harrison (1969) which was modified from the A. D. A. Specification No. 14 for dental chromium-cobalt casting alloy. Nine tensile test specimens were made from a split silicone mold for each of the test alloys to the size of 2.5mm in diameter and a gauge length of 10mm. All four alloys were handled in accordance with conventional methods used in Type III gold alloys. Ultimate tensile strength and elongation were measured on an Instron Universal Tensile Testing Machine (Model 1125, Japan) operated at a crosshead rate of 0.1cm/min. Elongation values were measured using Digital Measuring Microscope (MS-152, FUSOH, Japan). Vickers hardness was determined with a Vickers Hardness Tester (Model VKH-l, Japan) at a 1.0kg load on a mounted tensile test specimen. The following results were obtained from this study; 1. All tested alloys were composed of Au, Ag, Pd, Cu, Zn and Fe in common. The composition rate of gold for all four alloys was found in the range of $42{\sim}47$ weight % as shown below. Alloy A; Au 45%, Ag 40.2%, Pd 5.76%, others 9.04%. Alloy B; Au 47.1%, Ag 29.03%, Pd 6.98%, others 16.92%. Alloy C; Au 45%, .Ag 26.9%, Pd 6.83%, others 21.07%. Alloy D; Au 41.8%, Ag 34.4%, Pd 6.95%, others 16.85%. 3. The ultimate tensile strength of the four alloys was in the range of $31{\sim}82kg/mm^2$. The test results were shown in the below order from the highest value; As-cast condition; D, B, C, A. Softening heat treament; B, C, D, A. Hardening heat treatment; D, B, C, A. 4. The test :results of the elongation rate for each alloy were in the range of $0.5{\sim}18%$. The test results were shown in the below order from the highest value; As-cast condition; A, D, B, C. Softening heat treatment; A, C, D, B. Hardening heat treatment; C, D, B, A. 5. Vickers hardness for each of the four alloys was in the range of $120{\sim}230$. The test results were shown in the below order from the highest value; As-cast condition; C, B, D, A Softening heat treatment; D, B, C, A. Hardening heat treatment; D, A, C, B. 6. There were no differences in the physical properties between as-cast condition and softening heat treatment.

  • PDF