• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.2
• /
• pp.277-295
• /
• 1997

After clinical adjustment of dental casting restoration, re-polishing procedure is recommanded because the smooth gold sureface is lost. But there is the possibility to get more loose contact than that intended by loss of gold alloy according to the kinds of polishing materials and polishing time. Therefore in this study I polished type II gold alloy with 390gm force, 20,000rpm speed, and 8 kinds of gold alloy polishing materials, fabricated by 4 companies and then measured the amount of loss of gold alloy with Surfcorder SEF-30D and observed alloy surfaces polished by 3 brown rubber points with SEM. The amount of loss of gold alloys polished with 8 kinds of polishing materials and the degree of smoothness of gold alloys according to polishing time and polishing materials were compared. The following results were obtained : 1. When the amount of loss of gold alloys polished with 3 kinds of brown rubber point was compared, Alphalex brown point had the most amount of alloy loss, followed in decreasing order by Shofu brown point and Eveflex brown point. There was statistically significant difference in the amount of alloy loss according to polishing materials. 2. When the amount of loss of gold alloys polished with 5 kinds of green rubber point was compared, Shofu green point had the most amount of alloy loss, followed in decreasing order by Alphaflex green point, Dedeco green clasp polisher, and Eveflex green point. There was statistically significant difference in the amount of alloy loss according to polishing materials except Alphaflex green point and Dedeco green clasp polisher. 3. When the amount of loss of gold alloys polished with all kinds of rubber point was compared, there was no significant difference in Eveflex brown point, Alphaflex green point, and Dedeco green clasp polisher. 4. When average amount of alloy loss per 1 revolution by polishing materials was compared, Alphalex brown point had the greatest value as $0.329{\mu}m$ and Shofu supergreen point had the lowest value as $0.022{\mu}m$. 5. When the degree of sureface smoothness of gold alloy polished with 3 kinds of brown rubber point was compared, In Alphalex brown point surface roughness was completely lost after 20 seconds polishing time, in Shofu brown point 30 seconds, in Eveflex brown point 40 seconds. But in every gold alloys fine scratch formed by rubber points was observed. Based on the results of this study, as rubber polishing materials used in polishing of dental casting restoration after clinical adjustment influenced on the tightness of occlusal or proximal contact, we should make dental casting restoration with minimum error through careful laboratory procedure and form very smooth surface of restoration with tripoli and rouge after use of silicone polishing materials.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.88-92
• /
• 2005

Aptamer is the single-stranded oligonucleotide which binds to various target molecules such as proteins, peptides, lipids and small organic molecules with high affinity and specificity. DNA aptamers specific for the $17{\beta}-estradiol$ were selected by SELEX (Systematic Evolution of Ligands by EXponential enrichment) process from a random DNA library. These DNA aptamers have a high affinity to $17{\beta}-estradiol$ as an endocrine disrupting chemical. Nanowell and $200{\mu}m$ gold electrode were used as substrate for DNA aptamer immobilization and electrochemical analysis. Especially, nanowell gold electrode was fabricated by e-beam lithography. The size of single nanowell is 130nm and 40,000 nanowells were deposited on one gold electrode. The immobilization method was based on the interaction between the biotinylated aptamer and streptavidin deposited on gold electrode previously. Immobilization procedure was optimized by surface plasma resonance (SPR) and electrochemical analysis. After the immobilization of DNA aptamer on streptavidin modified gold electrode, $17{\beta}-estradiol$ solution was treated on aptamer immobilized gold electrode. The current of gold electrode was decreased by the binding of $17{\beta}-estradiol$ to DNA aptamer immobilized on gold electrode. However, in negative control experiments of 1-aminoanthraquinone and 2-methoxynaphthalene, the current was rarely decreased. And more sensitive data was obtained from nanowell gold electrode comparing with $200{\mu}m$ gold electrode.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.337-341
• /
• 2001

A new method to extract gold from pyrite roster cinder, which combines ultra-fine-grinding with resin-in-pulp, has been studied in this paper. Compared with traditional leaching technology, it can short leaching time, avoid complex filter process, lower sodium cyanide consumption and increase gold recovery by 35%. During leaching, aluminium oxide ball was used as stirred medium, hydrogen peroxide as leaching aid and sodium hexametaphosphate as grinding aid. With the high efficiency and chemistry effect of ultra-fine-grinding, the leaching process was developed and the gold leaching rate may reach 88%. With AM-2 Б resin as abosorber and sulfocarbamide (TU) as eluent, gold was recovered from cyanide pulp by resin-in-pulp. AM-2 Б resin has good adsorbability in cyanide solution(pH=10). It was easy to elude gold from the loaded resin with 0.1㏖/L cholhydric acid and 1㏖/L sulfocabamide. The effect of contact time, temperature and acidity etc. on the gold absorption had been examined with static methods. The results showed that the adsorption and desorption of gold could both reach over 98%. The effects of flow rate of solution on dynamic adsorption and elution of gold had been examined with dynamic methods. Breakthrough curve and elution curve had been drawn in this paper. A mild condition was determined through a number of experiments: leaching time 2 hours, liquid solid ratio 4:1, sodium cyanide 3kg/t, hydrogen peroxide 0.05%, sodium hexametaphosphate 0.05%; adsorption time 30 minutes, temperature 10-3$0^{\circ}C$, resin($m\ell$) solid(g) ratio 1:10, eluent resin ratio 10-20:1, velocity of eluent $1.5m\ell$/min. Under the mild condition, the gold recovery may reach 85%.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.6
• /
• pp.825-834
• /
• 1999

Recently, various implant cylinders were supplied. especially received gold cylinders, cast cylinders produced from premade gold and plastic cylinders and plastic cylinders. This study measured and compared precise fit produced when using conventional gold and plastic cylinders. The comparative fit of lapped and non-lapped castings made from plastic pattern was examined. The implant/abutment interface fit was evaluated by scanning electron microscopy(SEM) for each of four cylinders. The following results were obtained: 1. The case of plastic cylinder showed $9.67{\pm}1.50{\mu}m$ gap when Steri-Oss fixture was connected. 2. The case of lapped casting made from plastic cylinder showed $3.01{\pm}2.81{\mu}m$ gap when Steri-Oss fixture was connected. 3 The case of gold/plastic cylinder showed $9.80{\pm}1.68{\mu}m$ gap when Steri-Oss fixture was connected. 4. The case of gold cylinder showed ${5.47{\pm}2.43\mu}m$ gap when Steri-Oss fixture was connected. 5. In case of each cylinder which was connected with Steri-Oss fixture, the size of gap was showed less in the order of the case of gold/plastic cylinder, the case of plastic cylinder, the case of gold cylinder and the case of lapped casting made from plastic cylinder As results of this study, the use of premade gold cylinder offers an advantage over plastic pat-terns in precise fit. When plastic patterns are used, polishing of implant cylinder components should provide precise fit.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.1
• /
• pp.169-179
• /
• 2009

In order to preserve the Korean traditional gold foil, to develop as Korean traditional textile art by utilizing in modem fashion for textile industry, and to examine utility of the material which can be used in the modem wearing, interior goods and fashion terms, Textiles Applied Korean Traditional Gold Foil were developed. The results are as follows: First, important factors of the gold foil image should be extracted as materials quality, color and pattern, and modem and practical qualities should be proceeded when developing the image of the gold foil into modem quality material. Second, since gloss of fabric developed by a traditional method is somewhat strong, uniformity being a little bit low for hand-made manufacturing, and practical quality is low for high cost, deletion of the gold foil, etc. So it hasn't been appropriate for studying modem fashion material. Third, Jacquard weave has been examined as the most appropriate method in order to present the gold foil image among a number of textile manufacturing techniques Fourth, considering factors deciding the image of the gold foil and a sense of beauty of modem society, gloss of the foil has been lessened by expressing pattern to lower traditional quality and primary color. Fifth, pattern motives of developed materials have been extracted tram traditional gold foil patterns, and materials have been chosen considering of concepts and motives, and dragon pattern, crane pattern and bat pattern, Sixth, wearing, pin-up works, bed linen, fabrics for chairs, ties, bags, shoes, umbrellas, etc. are produced with the developed materials, and practical use and modern quality have been examined. The result is very satisfactory.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.3
• /
• pp.123-130
• /
• 2012

Leaching experiments of gold and silver from roasted concentrate were carried out using a chlorine-hypochlorite solution. The leaching rate of gold was 75% at 1.5:1 ratio of chlorine and hypochlorite and increased to 81% with adding 1 M NaCl. However, at 1% pulp density and at $65^{\circ}C$, the leaching rates of Au were close to 100%. XRD analysis identified quartz in the solid residues after digestion of roasted concentrate with aqua regia or chlorine-hypochloride leaching solution. This suggests that the gold may not be leached out of the quartz in aqua regia or chlorine-hypochlorite solution. In order to leach the gold from the quartz, the concentrate will have to be pre-treated through ultra-fine grinding or treated with stronger oxidative agents.

• Economic and Environmental Geology
• /
• v.27 no.4
• /
• pp.325-333
• /
• 1994

Gold and/or silver mineralization in the southeast province, Korea, occurred in hydrothermal quartz vein that fills fracture zones in Cretaceous volcanic and sedimentary rocks of the Gyeongsang basin or granites and Precambrian gneiss. Most of the gold-silver-bearing veins in the province occur in Hapcheon, Suncheon and Haman-Gunbuk area where they are associated with Cretaceous Bulgugsa granites. On the basis of the Ag/Au ratio on amounts produced and ore grades, mode of occurrence, and associated mineral assemblages, hydrothermal Au-Ag deposits in southeast province, Korea, can be classified as follows: pyrite-type gold deposit (Group IIB, Samjeong and Sangchon deposits), antimony-type gold-silver deposit (Group IV, Gisan and Geochang deposits), and antimony-type silver deposit (Group V, Sanggo, Seweon, Seongju and Gahoe deposits). All of the gold-silver deposits in the province are generally characteristics of the gold-silver or silver-dominant type deposit which contains more silver-bearing minerals than those deposits in central Korea. The gold-silver mineralization in the deposits consist of two generation; the early characterized by gold precipitation and the late represented by silver-rich (as silver-bearing sulfosalts minerals) mineralization. All but one deposit (Samjeong deposit) having relatively lower Au content in electrum values between ${\approx}20$ and ${\approx}50$ atomic %. The mineralogical data on electrum-sphalerite and/or arsenopyrite geothermometry and fluid inclusion data indicate that the gold and silver mineralizations were occurred at temperatures of $190{\sim}280^{\circ}C$ and $150{\sim}180^{\circ}C$, respectively. These suggest that the gold-silver mineralization in the province occurred in the lower temperature and pressure conditions as epithermal-type hydrothermal vein deposit.

• Fashion & Textile Research Journal
• /
• v.24 no.1
• /
• pp.95-107
• /
• 2022

In reality, the distinction between the Korean traditional culture and the cultures of other countries is at a delicate boundary. Additionally in the wake of the recent socio-cultural confrontation between Korea and China, it has become necessary to establish the foundation and area of Korean traditional culture and to actively utilize the importance of improving awareness of Korean traditional culture. To reorganize the reckless use of the gold foil pattern shown in the rental hanbok, data on the museum's collection of gold leaf patterns were collected and analyzed. Based on the gold foil, Gilsang characters such as Phoenix pattern, Crane pattern, Bat pattern, Flower pattern, Fruit pattern and recovery advice were extracted through references. The traditional gold foil pattern was reconstructed and relocated to design the gold leaf patch. Based on the collection and analysis of the museum's relics, the Wonsam & Daedae, Dangeui, Sranchima, Sagyusam, Jeonbok, Bokgun, and Daenggi were produced. Therefore, we present the possibility of producing gold foil and modern methods for producing gold foil using laser cutting techniques that can express refinement and complexity well, and gold foil thermal transfer paper with retouchable effects. Additionally, we would like to reflect upon the practicality and the convenience to modern people by considering the complexity and hassle of the traditional gold foil production process, and the disadvantages of processes that require relatively longer time. It intends to help revitalize the market of Korean traditional clothing and fashion products.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.250-253
• /
• 2001

Mechanical properties of gold bonding wire for VLSI packaging have been studied. The diameters of gold wires are about 20-30 micrometer and fracture loads are 8-20 gram force. The elastic modulus, yield strength, fracture strength and elongation properties have been evaluated by micro-tensile test method. This work discusses for an appropriate selection of micro-force testing system and grip design in mim testing. The best method to determine gauge length of wire and to measure tensile properties has been proposed. The mechanical properties such as strength and elastic modulus of current gold bonding wire are higher than pure those of gold wire.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.119-122
• /
• 2003

We report a dramatic increase in the photo-stability of a blue-emitting polymer, poly(9,9-dioctylfluorene), achieved by the addition of gold nanoparticles to the polymer. The optical absorption band of gold nanoparticles is tuned to resonate the triplet exciton-ground state band gap energy of the polymer. The photo-oxidation rate of poly(9,9-dioctylfluorene) was drastically reduced by doping the polymer with a very small amount ($10^{-6}-10^{-5}$ volume fraction) of gold nanoparticles. The gold nanoparticles used herein act as the quenching agent of the triplet states and can be directly applied to various blue light emitting polymer thin film ( < 100 nm ) devices.