• 대한소아치과학회지
• /
• 제23권2호
• /
• pp.477-488
• /
• 1996

The purposes of this study were to measure the solubility of the stannous fluoride experimentally, to find a method for improving the solubility of the stannous fluoride, and to observe the effect of longterm storage on the variation of the concentration of fluoride in the stannous fluoride solutions. By adding such materials as antiseptics, dye, flavor, and tastes to solution, the variation of the fluoride concentration was also observed. Ten groups of 0.4% stannous fluoride solutions to which glycerine, sodium chloride, chlorhexidine, dye, flavor, xylitol, and sorbitol were added were prepared. The measurements were carried out by direct calibration. The obtained results were as follows. 1. Effect of adding glycerine as solvent. : The solubility of stannous fluoride increased in the case of adding glycerine. By increasing the glycerine concentration, the fluoride level in stannous fluoride solution also increased. 2. Effect of adding sodium chloride and chlorhexidine. : Comparing to the case of pure water, low fluoride level was measured in case of adding sodium chloride and high fluoride level was measured in case of adding chlorhexidine. 3. Effect of adding erythrosin as dye and banna essence as flavor. : Adding erythrosin and banna essence didn't affect fluoride level. 4. Effect of adding xylitol and sorbitol. : The effects of xylitol and sorbitol were nearly the same as the effect of adding erythrosin and banna essence.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.631-636
• /
• 2000

The experimental study concerns the characteristics of a transitional flow in a concentric annulus with a diameter ration of 0.52, whose outer cylinder is stationary and inner one rotating. The pressure drops and skin-friction coefficients have been measured for the fully developed flow of water and that of glycerine-water solution (44%) at a inner cylinder rotational speed of $0{\sim}600$ rpm, respectively. The transitional flow have been examined by the measurement of pressure drops and the visualization of flow field, to reveal the relation of the Reynolds and Rossby numbers with the skin-friction coefficients and to understand the flow instability mechanism. The present results show that the skin-friction coefficients have the significant relation with the Rossby numbers, only for laminar regime. The occurrence of transition has been checked by the gradient changes of pressure drops and skin-friction coefficients with respect to the Reynolds numbers. The increasing rate of skin-friction coefficient due to the rotation is uniform for laminar flow regime, whereas it is suddenly reduced for transitional flow regime and, then, is gradually declined for turbulent flow regime. Consequently, the critical (axial-flow) Reynolds number decreases as the rotational speed increases. Thus, the rotation of inner cylinder promotes the early occurrence of transition due to the excitation of taylor vortices.

• 한국세라믹학회지
• /
• 제19권1호
• /
• pp.19-23
• /
• 1982

The technique to determine the components in the supersulphated slag cement is discussed by several selective extraction analyses. Accordingly, the rate of hydration reaction of supersulphated slag cement could be quantitatively measured by the following 3 kinds of the selective extraction analyses. (1) Determination of unreacted slag - a salicylic acid, acetone.methanol solution (2) Determination of free $CaSO_4$ - a half saturated lime water (3) Determination of free $Ca(OH)_2$ - glycerine.alcohol solution

• 대한화학회지
• /
• 제40권9호
• /
• pp.640-648
• /
• 1996

Chitin을 epichlorohydrin과 반응시켜 가교 chitin을 합성하고, $C_2$ 위치의 아세트아미드기를 탈아세틸화하여 가교 chitosan을 얻었다. 가교 chitosan을 증류수에 팽윤시킨 다음 글리세린과 silver sulfadiazine을 가하여 고분자 matrix를 제조하였다. 이렇게 제조된 matrix로부터 in vitro에서의 약물 방출 pattern을 고찰하기 위해 pH7.4 인산염 완충용액 중에서 약물의 함유량, 글리세린의 농도 변화 및 matrix 두께변화에 미치는 인자들에 관하여 연구 검토 하였다. 고분자 matrix내의 약물의 함유량과 matrix의 두께가 증가할수록 약물 방출 지속 시간은 지연되었다. 그러나 글리세린의 함유량이 증가함에 따라 약물 방출 지속 시간은 오히려 감소 하였다. 또한 약물의 함유량과 글리세린의 함유량이 증가할수록 겉보기 방출속도상수 (K)값도 증가하였으나, matrix 두께가 증가함에 따라서는 겉보기 방출속도상수(K)값이 일정하였다. 이상과 같이 가교 chitosan은 약품의 방출 조절형 제제로서 사용 가능성을 나타냈으며, 약물로 사용된 silver sulfadiazine의 방출거동은 Higuchi model에 따른 확산으로 생각되었다.

• 설비공학논문집
• /
• 제14권10호
• /
• pp.833-843
• /
• 2002

The present experimental and numerical investigations are performed for the characteristics of transitional flow in a concentric annulus with a diameter ratio of 0.52, whose outer cylinder is stationary and inner one rotating. The pressure losses and skin- friction coefficients have been measured for the fully developed flow of water and glycerine-water solution (44%) with the inner cylinder rotating at speed of 0∼600 nm, respectively. The transitional flow has been examined by the measurement of pressure losses to reveal the relation of the Reynolds and Rossby numbers with the skin-friction coefficients. The occurrence of transition has been checked by the gradient changes of pressure losses and skin-friction coefficients with respect to the Reynolds numbers. The increasing rate of skin-friction coefficient due to the rotation is uniform for laminar flow regime, whereas it is suddenly reduced for transitional flow regime and, then, it is gradually declined for turbulent flow regime.

• 대한화장품학회지
• /
• 제44권4호
• /
• pp.381-388
• /
• 2018

저온 감압 조건에서 얻어진 천년초 추출액의 여러 특성을 살펴보고, 이 추출액을 보습제로 활용한 에센스 화장품을 제조하였다. 천년초 추출액은 다른 보습제인 글리세린, 히알루론산 1% 용액에 비해 표면장력(25 mN/m)과 접촉각($8^{\circ}$)이 매우 낮은 값으로 나타났다. 또한 점도도 낮고 끈적임이 거의 없는 특성을 보였다. 천년초 저온감압 추출액은 별도의 계면활성제 첨가 없이도 물에 적은 양의 오일을 유화시킬 수 있었다. 다른 보습제와 달리, 화장품 에센스에서 천년초 추출액의 함량이 높을수록 제형의 끈적임과 점도는 감소하는 결과가 나타났다. 이러한 결과들로부터 천년초 저온 감압 추출액이 수분감과 함께 끈적임이 적은 사용감을 부여하는 천연 보습제로 활용이 가능함을 알 수 있었다.

• 대한기계학회논문집B
• /
• 제24권6호
• /
• pp.822-833
• /
• 2000

This experimental study concerns the characteristics of a transitional flow in a concentric annulus with a diameter ratio of 0.52, whose outer cylinder is stationary and inner one rotating. The pressure drops and skin-friction coefficients have been measured for the fully developed flow of water and that of glycerine-water solution (44%) at a inner cylinder rotational speed of $0{\sim}600$ rpm, respectively. The transitional flow has been examined by the measurement of pressure drops and the visualization of flow field, to reveal the relation of the Reynolds and Rossby numbers with the skin-friction coefficients and to understand the flow instability mechanism. The present results show that the skin-friction coefficients have the significant relation with the Rossby numbers, only for laminar regime. The occurrence of transition has been checked by the gradient changes of pressure drops and skin-friction coefficients with respect to the Reynolds numbers. The increasing rate of skin-friction coefficient due to the rotation is uniform for laminar flow regime, whereas it is suddenly reduced for transitional flow regime and, then, it is gradually declined for turbulent flow regime. Consequently, the critical (axial-flow) Reynolds number decreases as the rotational speed increases. Thus, the rotation of inner cylinder promotes the early occurrence of transition due to the excitation of taylor vortices.

• 약학회지
• /
• 제41권5호
• /
• pp.607-614
• /
• 1997

Flurbiprofen- and flurbiprofen axetil-loaded microemulsions composed of soybean oil, poloxamer 407, glycerine and water were prepared by generator-type homgenizer and ultrasoni c probe system. The particle size of microemulsions was measured by the dynamic light scattering method. The pharmacokinetics and organ distribution of flurbiprofen were investigated after intravenous injection of flurbiprofen solution, flurbiprofen-loaded microemulsion and flurbiprofen axetil-loaded microemulsions equivalent to 10mg/kg of flurbiprofen to rats. Blood samples were collected from the anterior ciliary artery of rats for 24hr, and flurbiprofen in plasma and organs was analyzed by HPLC. Stable microemulsions were prepared. Even though there is a little change in droplet size just after the preparation, no creaming and no separation were occured during the storage period for 6 months at 4, 21, 37 and 45$^{\circ}C$. Pharmacokinetic parameters and organ distribution of flurbiprofen after intravenous injection of flurbiprofen- and flurbiprofen axetil-loaded microemulsions emulsified with poloxamer 407 were not significantly different from those of commercial lipid microemulsion emulsified with lecithin. Therefore, it is concluded that flurbiprofen- and flurbiprofen axetil-loaded microemulsion prepared with poloxamer 407 could be used as a parenteral formulation.

• 멤브레인
• /
• 제2권1호
• /
• pp.67-73
• /
• 1992

건습식방법에 의해 제조된 중공사는 1차적으로는 방사원액 및 내외부응고제의 조성과 양 그리고 방사높이 드의 방사조건에 의해 막의 전체적인 구조 및 투과성능이 영향을 받지만 제조된 중공사의 건조과정이나 용매처리, 열처리등에 의해서도 큰 영향을 받는다. 본 실험실에서는 건습식방사법에 의해 한외여과용 폴리설폰중공사막을 제조하여 후처리조건을 변화시켜가면서 그 중공사막의 투과특성을 조사하였다. 그 결과 건습식방사법에 의해 제조된 폴리설폰중공사는 건조시간이나 건조온도가 증가하면 막의 수축이 크게 일어나서 툭수헝이 크게 감소하고 역으로 용질배제율은 높아지며 한범 감소된 막의 투수성은 회복이 불가능하다. 따라서 중공사의 투과성능을 보존하기위해서는 100%글리세린으로 처리하여 막의 건조를 피해야한다는 사실과 $20^{\circ}$C의 흐르는 water에서 수세하는 경우 단시간에 중공사의 잔여용매(NMP, DMAc)를 제거하기는 어려우며 이러한 잔여용매는 중공사막의 투과성능의 안정성 및 재연성을 크게 손상시키기 때문에 열수처리를 해주어야 한다는 것을 알았다. $100^{\circ}$C 열수처리결과 단시간에 잔여용매의 제거가 가능하였으며 투과성능도 안정적으로 얻을 수 있었다.

• 한국표면공학회지
• /
• 제3권1호
• /
• pp.7-12
• /
• 1970

Only mannitol or glycerine is generally used for the determination of boric acid in a nickel plating solution in order to make its acidic property so strong that it can be titrated with NaOH. However, these solutions give very amgiguous color change of indicator due to the precipitation of nickel salts . Therefore, only experienced dchemistsorwell trained workimen can accurately confirm the actual end point of the titratiion. For eliminating such interference of nickel salts and easily confirming the end point by any persons , the author attempted to find out a solution which produces no precipitates during the titration in these experiments, and also he tried to funish the reason for ambiguousness in titration. The following results were obtained after many experiments. (1) In any titrations which produce nickel salts such nI(oh)$_2$, the salt is formed umption very approximate to the end point, which shows some error by the consumption of titrant(NaOH) . Then, the pink color of phenolphthalein is absorbed by Ni(OH)$_2$ and the pH jumping at the end pint is also diminished to as little as less than 15% of the total phenophthalein ph range. (2) Known methods by complex salts of citrate,w hich do not produce precipitates of Ni(OH)$_2$, are also not very satisfactory, because, the pH jumping at the end point is only about 35% and the color change of phenolphthalein is form blue-green to purple-blue. (3) New method by complex salts of oxalate were attempted in these experiments. They also did not produce precipitates of Ni(OH)$_2$ and were very satisfactory in color change at the end of point was about 65% and the color change was from blue-green to purpled. In this methods, analytica cost was minimized by the use of less amounts of cheaper chemicals than the conventional citrates complex methods. The mixture of chemicals used was composed methods. The mixture of chemical used was composed of 37g/ι of sodium oxalate(Na$_2$C$_2$O$_4$$.$5H$_2$O), 2g/ι of phenolphthalein, and 400ml /ι of glycerin. The accuracy of analysis was within the error of 0.5%. (4) The procedure of analysis was as follows. One ml of nickel plating solution was taken out and to it were added 20ml of water and 20 ml of the above mixture for the indicator. The solution was titrated with 0.1N NaOH. The quantity of boric acid was calculated by the following equation. Boric acid (g/ι) = 6.184${\times}$F${\times}$ml .