본 연구에서는 옻과 교의 배합을 통한 옻의 상온경화에 관한 연구를 진행하였다. 이를 위하여 교의 제조부터 옻에 첨가하는 비율까지 여러 시편을 제작하여 실험하였다. 옻의 건조와 가장 연관이 깊은 시편의 수분함유량을 측정한 결과 교의 종류 및 제조비율에 관계없이 첨가비율이 증가할수록 수분함량이 증가한 것을 확인하였다. 건조 시간을 알아보기 위한 도막 시편에서 어교를 배합한 시편은 약 3일 이상의 건조시간을 소비하였으나 매끈한 표면 상태 그대로 건조되었고, 아교를 배합한 시편은 하루 이내에 완전건조 하였으나 빠른 경화속도로 인해 표면에 주름이 생성되었다. 또한 어교를 배합한 시편은 아교를 배합한 시편이 공기와 접촉하자마자 검게 산화되는 것에 비해 초기 색변화가 느리게 진행되었으나 완전건조 후에는 색도에 큰 차이가 없는 것으로 나타났다. FT-IR을 통한 시편의 구조 분석에서 옻에 교를 배합한 시편의 카르보닐 결합이 기존의 생칠, 정제칠에 비해 증가한 것을 확인하였다.
아교는 수용성을 띄는 접착제로, 이 특징에 의해 물에 약하다는 단점에도 불구하고 전통적인 고가구에 많이 사용되어 왔다. 이러한 단점을 개선하기 위하여 많은 연구가 진행되고 있다. 본 연구에서는 탄소나노튜브를 도입에 따른 아교의 계면특성 및 열적특성 그리고 방수특성 개선에 대한 연구를 진행하였다. 탄소나노튜브의 비율이 증가함에 따라 아교를 이용하여 접착한 돌침대용 목재 샌드위치 판 상부의 실시간 온도측정을 진행하였다. 나무와 아교접착제 간의 계면특성의 변화를 알아보기 위하여 랩 전단 실험을 실시하였고, 습도가 높아짐에 따라 물성이 약해지는 아교의 단점을 개선하기 위하여 탄소나노튜브를 도입에 따른 아교의 방수특성이 개선되는지 대한 실험을 진행하였다. 랩 전단시편을 물에 담근 후 랩 전단 실험을 진행하여 기존의 결과와 비교하여 차이가 얼마나 나는지 비교하였다. 이를 증명하기 위하여 물과의 정적 접촉각을 이용해 탄소나노튜브의 함량에 따른 아교접착제의 소수성 정도를 비교하였다. 실험결과 아교 접착제에 탄소나노튜브를 도입으로 계면특성, 열적특성 및 방수특성이 개선되었다.
FE analyses for weldment of ship structure are required for various reasons such as stress concentration for bead tow, residual stress and distortion after welding, and hydrogen diffusion for prediction of low temperature crack. These analyses should be done by solid element modeling, but most of ship structures are modeled by shell element. If we are able to make solid element in the shell element FE modeling it is easily to solve the requirement for solid elements in weld analysis of large ship structures. As the nodes of solid element cannot take moments from nodes of shell element, these two kinds of element cannot be used in one model by conventional modeling. The PSCM (Perpendicular shell coupling method) can connect shell to solid. This method uses dummy perpendicular shell element for transferring moment from shell to solid. The target of this study is to develop a FE pre-processing system applicable at welding at ship structure by using PSCM. We also suggested glue-contact technique for controlling element numbers and element qualities and applied it between PSCM and solid element in automatic pre-processing system. The FE weldment modeling through developed pre-processing system will have rational stiffness of adjacent regions. Then FE results can be more reliable when turn-over of ship-block with semi-welded state or ECA (Engineering critical assessment) of weldment in a ship-block are analyzed.
Nowadays, as the development period of new products becomes shorter and consumer's requirement is more various, the importance of Rapid Prototyping Technology has been rapidly increased. Rapid Prototyping makes prototypes or frictional parts directly using the 3D CAD data. But RP machines can make prototypes in limit size. For making large size prototype, we slice solid which is made of STL file, and then glue sliced solid. And if contact area of part is small, union solid will be easily destroyed for going down of adhesion. So we need to expand contact area, 1 suggest making a section into stair shape. This paper is concerned with slicing solid on STL file and improving on adhesion.
본 연구는 하수 탈수찌꺼기가 건조기에 직 투입되는 경우 함수율 40~60% 구간에서 발생하는 Glue Zone에서 뭉침 및 Fouling 현상 등의 문제점 및 에너지효율 개선을 하기 위해 수행하였다. 열풍 온도는 270~300℃로 낮게, 패들타입의 부상방식과 순환되어진 축열 메디아에 탈수찌꺼기가 도포되어 열풍과의 접촉면적을 증대시켜 에너지 회수 및 가스 배출량을 감소시켰으며, 건조 찌꺼기의 함수율은 2.7~7.5%, 수분 증발열량은 608.0~690.6kcal/kg·H2O로 축열 메디아 미투입 시 수분 증발열량 714.5 kcal/kg·H2O과 비교하여 약 8.8%의 에너지 절감 효과를 확인하였다.
Kua, Ee Hsiang Jonah;Leo, Kah Woon;Ong, Yee Siang;Cheng, Christopher;Tan, Bien-Keem
Archives of Plastic Surgery
/
제40권5호
/
pp.584-588
/
2013
Background The ability to achieve a long-term, stricture-free urethral repair is one of the ongoing challenges of reconstructive urologic surgery. A successful initial repair is critical, as repeat procedures are difficult, owing to distortion, scarring, and short urethral stumps. Methods We describe a technique in which the gracilis muscle flap is laid on or wrapped around the urethral repair site to provide a well-vascularised soft tissue reinforcement for urethral repair. This technique promotes vascular induction, whereby a new blood supply is introduced to the repair site to improve the outcome of urethral repair or anastomotic urethroplasty. The surface contact between the muscle flap and the repair site is enhanced by the use of fibrin glue to improve adherence and promote inosculation and healing. We employed this technique in 4 patients with different urethral defects. Results After a follow-up period of 32 to 108 months, all of the urethral repairs were successful without complications. Conclusions Our results suggest that the use of a gracilis muscle flap to vascularise urethral repairs can improve the outcome of challenging urethral repairs.
In this study, stress and deflection behaviours of T-type welding joint applied to HE200M steel beam and column were investigated in finite element method (FEM) under different distributed loads. In the 3D-FEM modelling, glue option was used to contact between steel materials and weld nuggets. Geometrical model was designed as 3-dimensional solid in ANSYS software program. After that, homogeneous, linear and isotropic properties were used to design to materials of model. Solid-92 having 3-dimensional, 4 faced and 10-noded was selected as element type. In consequence of mesh operation, elements of 13285 and nodes of 28086 were occurred. Load distribution was applied to top surface of steel beam to determine behaviours of stress and deflection. As a result of FEM analysis applied with the loads of 55,000 N, 110,000 N and 220,000 N, maximum values were obtained as 116 N/$mm^2$, 232 N/$mm^2$ and 465 N/$mm^2$ for stress and obtainedas 1,083 mm, 2,166 mm and 4.332 mm for deflection, respectively. When modelling results and classical calculation values were compared, it was obtained difference of 10 % for stress values and 2.5% for deflection values.
Objectives: Tetrahydrofuran (THF) is a colorless, water-miscible organic liquid with low viscosity at standard temperature and pressure. THF has been used as a solvent and a precursor for various syntheses of polymers. However, THF is known to irritate to the eyes, skin and mucus membranes. Overexposure by inhalation, ingestion or skin contact may produce nausea, dizziness, headaches, respiratory irritation and possible skin burns. The purpose of this study is to evaluate of the worker exposure and characteristics of workers in the workplaces that use or manufacture THF. Methods: Sixteen factories in Korea, which manufacture or use THF, were selected for this study and a total of 130 air samples including 104 time-weighted average (TWA) samples and 26 short-term exposure limit (STEL) samples, were collected. Air samples were collected with charcoal tube (100mg/50mg) and analyzed by gas chromatograph/flame ionization detector(GC/FID). Results: The TWA concentration of THF was 16.05ppm (GM) at PS script printing, 2.32ppm (GM) at PVC stabilizer, 1.03ppm (GM) at Lithium triethylborohydride, 0.63ppm (GM) at Polytetramethylene ether glycol(PTMEG), 0.42ppm (GM) at Manufacturing THF, 0.13ppm (GM) at Glue and 0.12ppm (GM) at synthetic rubber/resins. Two out of sampes for PS script printing exceeded 50ppm as 8-hour exposure limit of MOEL. The short term exposure to THF was 54.77ppm (GM) at PS script printing, 17.10ppm (GM) at PTMEG, 13.76ppm (GM) at Manufacturing THF, 2.86ppm (GM) at Lithium triethylborohydride, 0.87ppm (GM) at synthetic rubber/resins and 0.13ppm (GM) Glue. We found that the highest exposure process for both the TWA and STEL samples was PS script process. Two samples exceeded 100ppm as short term exposure limit of Ministry of Employment and Labor(MOEL). Conclusions: Characteristic of STEL concentration for THF is considerably different from TWA concentration in workplaces because workers could exposure high concentration of THF in a moment when they work irregularly schedule. So exposure controls for momentary works have to be prepared, and considered the skin absorption and inhale of THF.
모발표면에는 독특한 형태의 지방산이 있다. 18-methyleicosanoic acid (18-MEA)는 모발 큐티클의 최외각 층에 공유결합된 특이한 ante-iso 형태의 지방산이다. 18-MEA 층은 CMC의 ${\beta}$-층 위에 위치하면서 모발의 외부 표면에 표면에너지와 마찰저항 을 낮춰준다. 18-MEA 분자의 높은 유동성은 계면 전단력을 감소시켜 외부로부터 전달되는 지질들이 쉽게 퍼지도록 한다. 본 연구에서는 C10 - 40 isoalkyl acid의 말단에 관능기로 N-hydroxyl succinimidyl ester를 도입하여 모발 표면의 공유결합 지방산 층을 회복시켜보고 자 하였다. 모발 표면의 재 소수화를 확인하기 위하여 접촉각을 측정하였다. 서로 다른 습도 조건(40, 55, 70 %RH)에서 모발의 내부 수 분 함유량은 전자 수분 분석기를 이용하여 실시하였다. Hydroxysuccinimidyl C10 - 40 Isoalkyl Acidate (HCIA)로 처리한 모발의 표면은 큐티클을 접착하는 것과 같이 지방산 단분자층이 공유결합을 형성하여 큐티클의 균열을 채워줌으로써 매끄럽고 균일할 것으로 생각되었다. 이러한 접착 효과는 atomic force microscope (AFM) 영상의 라인 프로필(line profile)을 통해서 확인되었다. 따라서 모발 내부 구 성 물질과 수분이 쉽게 용출되지 않고, 외기의 습도가 변하는 경우에도 최적의 모발 습도가 항상 유지된다. AFM을 사용한 lateral force microscopy (LFM) 결과에 따르면 HCIA를 처리한 모발 표면의 마찰력이 감소되었고, 이에 대해 15회 샴푸 과정을 수행한 이후에도 동일한 마찰력 값을 나타내었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.