• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.3
• /
• pp.336-347
• /
• 2000

Statement of problem. Luster loss in esthetic anterior ceromer restoration can occur and can be related with rough surface texture. Understanding durability of surface finishing methods like polishing and surface coating have critical importance. Purpose. This study evaluated the effect of tooth brushing and thermal cycling on surface luster of 3 ceromer systems (Artglass, Targis, Sculpture) treated with different surface finishing methods. Material and methods. Seventy-two samples were prepared: 12 for control group Z100, 12 for Artglass, 24 for Targis, and 24 for Sculpture. Half of the Targis and Sculpture were polished according to the manufacturer's recommendation. The rest of the samples were coated with staining and glazing solution for Targis and Sculpture, respectively. All specimens were subjected to 10,000 cycles between $5^{\circ}C\;and\;55^{\circ}C$ with 30 seconds dwell time. Tooth brushing abrasion tests were performed in a customized tooth brushing machine with 500g back and forth for 20,000 cycle. Luster comparisons were based on grading after direct observation, and light reflection area was measured with Image analysis software. Results. All materials showed an decrease in luster grade after thermal cycling and tooth brushing. The post-tooth brushing results revealed that the glazed Sculpture had greater mean luster grade than did any other groups. While, the stained Targis group showed greatest changes after tooth brushing (p < 0.05), polished Targis and Sculpture did not show significant changes. However, glazed Sculpture showed discretely fallen out glaze resin. Conclusion. From the results of this study, all of the ceromer specimens were much glossy than control composite group after tooth brushing. coatings used for Targis and Sculpture had not durability for long term use.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3280-3286
• /
• 2009

In this paper, we designed and manufactured HD Switch Panel parts with micro-etched pattern. By using CAE analysis, we could predict weld-line positions and the amount of shrinkage during injection molding process. We measured the temperature distribution of the mold surface so that we could optimize the processing conditions such as mold temperature. In order to increase the transcription of micro-etched pattern, we applied the E-Mold technology and evaluated the effect of mold temperature on the surface quality. We concluded that the etched pattern was improved(more than 2.5$\to$1.5~1.7) through the measurement of surface gloss and the observation of both SEM and SPM images.

• Journal of the Korea Furniture Society
• /
• v.27 no.4
• /
• pp.343-351
• /
• 2016

This study was jointly conducted by the department of nursing science in a college of natural sciences and the furniture design department in the art and physical education to research the critical factors for the furniture development for the Elderly in consideration of the surging number of senior citizens not only in Korea but also globally. On the basis of the Elderly's physical and mental characteristics investigated by the department of nursing science, the furniture design guideline for the Elderly was presented. The following points should be considered at designing the furniture for the Elderly. First, multiple functions like chair with removable toilet bowl and part lighting in bed are advantageous. Second, the dimension of furniture such as chair, bed and sofa should be ergonomically thought in terms of structure for the Elderly's convenience. Third, the bright and vivid color of furniture should be chosen from the aspect of the design, while the different kinds of blue should be avoided. Small patterns and high glossy are not recommendable, but various kinds of feelings in different shapes are suggested. Forth, the material should contribute to the fracture prevention and for that sponge, fabric and leather smoothing the surface of furniture are recommendable as the finishing treatment in a wide variety of colors.

• Korean Journal of Plant Taxonomy
• /
• v.48 no.2
• /
• pp.134-142
• /
• 2018

The achene morphology of 21 taxa of Persicaria sect. Cephalophilon including the related taxa of Koenigia (Polygonaceae) was examined using stereo microscopy and scanning electron microscopy to evaluate its diagnostic values and taxonomic implications. The outlines of achene were narrowly ovoid to broadly ovoid in general, and elliptic achenes were observed in Koenigia taxa, with the achene shape being biconvex or trigonous. The size of the P. sect. Cephalophilon taxa ranged from $0.93-3.55{\times}0.80-2.31mm$ and the size of examined Koenigia taxa ranged from $1.10-1.84{\times}0.79-1.02mm$. The smallest achenes in P. sect. Cephalophilon were observed in P. humilis and the largest achenes were found in P. chinensis var. chinensis. Furthermore, infraspecific taxa of P. chinensis had relatively large achenes compared to other taxa within the section. Most taxa of P. sect. Cephalophilon had dull achenes, while four taxa had glossy achenes (P. capitata, P. runcinata var. runcinata, P. runcinata var. sinensis, and P. sinuata). Four types of surface patterns (smooth, tubercles, small pits, and irregular ridge) were observed, and the tubercles were divided into two subtypes according to the grouping and distribution pattern. The achene morphology of P. sect. Cephalophilon is described and compared, and its taxonomic implications are also discussed.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.222-228
• /
• 2008

On living skin the chances of a successfully developing latent fingerprint are very limited. This is due to the fact that continual perspiration and rapid absorption diffuse into the lipophillic layer on skin. A study was conducted to investigate effectively developing method of latent fingerprints on human skin surfaces and pig skin likely corpse's skin. We used commercial fingerprint powder, black powders, black magnetic powder, fluorescence magnetic powder, Cyanoacrylate fuming (CA) and direct lifting methods (lifting paper, glasses and photo glossy paper). Developing of fresh fingerprints on living skin was achieved with S-powderblack, CA fuming and CA fuming following S-powder, fluorescence powder. The other powder tends to overwhelm the latent print and the background. But, latent fingerprint residue was disappeared with time after deposit on a living surface. In case of pig skin likely corpse's skin, latent fingerprint detection was achieved with CA fuming following S-powder and deposited print during 6 hr at $25^{\circ}C$, 40% relative moisture yielded excellent fingerprints with clear ridge details using 1 min CA fuming. And enhancement of fingerprint detection image using forensic light source was achieved.

• The Journal of Korean Medicine
• /
• v.34 no.3
• /
• pp.1-12
• /
• 2013

Objectives: This was study about identifying fine seed herbs that are highly mixed together: Celosiae Semen, Celoisae Cristatae Semen, Cuscutae Semen, Perillae Semen. Methods: In non-distinctive herbs through sensory test, we can find accurate discriminative points by using a stereoscope. As a result, a new discriminative key was completed. Results: We identified a comparison of herbs which are mixed up in distribution. 1) In the case of Celosiae Semen and Celoisae Cristatae Semen, Celoisae Cristatae Semen which is mixed up is bigger and more glossy and especially have the sunk umbilicus. 2) In the case of Cuscutae Semen and Perillae Semen, Perillae Semen is discriminated by characteristic morado netting surface and impression of fruit stalk in the single-ended. 3) In the case of Cuscutae Semen which is distributed in three species, we discriminated by beak shape, location of umbilicus and vomiting thread shape or not when put in water. (1) Cuscuta chinensis has a weak beaky shape, an umbilicus in center and is vomiting thread shape when put in water. (2) C. australis has very weak beaky shape, an umbilicus beneath and is vomiting thread shape when put in water. (3) C. japonica has clear beaky shape, an umbilicus beneath and is not vomiting thread shape when put in water. Conclusions: A stereoscope can be effectively used for identifying fine seed herbs hardly distinguishable by sensory tests.

• Conservation Science in Museum
• /
• v.15
• /
• pp.56-65
• /
• 2014

The face of the Seated Stone Buddha ^{Korean Treasure No.84} of Sinboksa Templesite in Gangneung was contaminated with a glossy resin, spoiling its beauty. The contaminants covered the face, the forehead of the urna, to the bottom of the jaw. FT-IR analysis on a sample of the contaminants identified the substance as cyanoacrylate instant adhesive, which can normally be melted with acetone and removed with a swab. However, given that the surface of the statue was severely weathered from prolonged open-air exposure, alternative removal procedures were considered, to minimize the possibility of physical damage. After research, two removal procedures were utilized: one procedure involving poultices, which had been used to remove graffiti from the Samjeondobi Stele, and one procedure involving steam sterilization, which has been used to remove resin from pottery and porcelain. When both the poultices and steam sterilization were applied together, the resin was removed within twenty-four hours, without physical work using a swab.

• Journal of Environmental Science International
• /
• v.23 no.8
• /
• pp.1463-1468
• /
• 2014

An exotic parasitic wasp Anisopteromalus apiovorus of Pteromalidae was newly recorded in Korea. Specimens of this species have been collected in Gimhae of Korea since 2012. External morphology of this species was described in detail and diagnostic differences of this species from the related species and the host insect were also given. The funicle segments of female antennae are 1.2 to 1.5 times longer than those of Anisopteromalus calandrae, an sister species. Body color is gold-glossy black and with dense creamy-white hairs on the surface. This exotic species has been originated from the African continent including Democratic Republic of Congo and Cote d'Ivoire, and then intruded into other countries, for instance, Korea. This is the first distribution record of this species except the country of origin after original description as a new species. Although little is known about the life history or ecology of this species, we found that a new host of this small parasitic wasp is Lasioderma serricorne of coleoptera through present study. And this species possibly be a new agent of biological control for economic pests. It was presumed that the invasion of Anisopteromalus apiovorus into Korea was prior to November of 2012.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.283-283
• /
• 2013

Because of beautiful glossy and color, the value of gold leverage is very high in Europe. To improve the quality of gold alloys, we performed heat treatment on 14 K white gold alloys by variously changing age-hardening conditions. Age-hardening behavior and the related phase transformation changes were studied to elucidate the hardening mechanism of 14 K white gold alloy. For solid solution treatment [ST], casted gold alloy specimens were treated at high temperature ($750^{\circ}C$) for 30 minutes, and the specimens dropped to water to quench them. For Age-hardening treatment [AT], the specimens were treated at various temperatures ($250{\sim}300^{\circ}C$). After the heat treatment, we observed the phenomenon to increase hardness from 126 Hv to 166 Hv by Vicker's hardness tester. Through electron probe micro-analysis (EPMA) mapping analysis, we investigated that irregular particles were changed uniformly. In the SEM and OM images, two phases of matrix and particle-likestructures were observed, and the precipitation of these elements from the matrix progressed during age-hardening. By transmission electron microscope and X-ray diffraction observation, it was revealed that the formation of the Au3Cu superstructure contributed to the age-hardening at $270^{\circ}C$ in the gold alloy. After the heat treatment, this analysis shows that casted gold alloys were to improve hardness and to moderate surface defects at specific temperatures and duration.

• Fashion & Textile Research Journal
• /
• v.18 no.2
• /
• pp.244-251
• /
• 2016

Viscose rayon filament fabrics have been called 'artificial silk' and beloved as summer clothing materials for a long time in Korea. This is because the viscose rayon filament fabrics reveals glossy surface and cool touch feeling compared to other conventional fabrics composed of staple fibers. Therefore, we tried to prepare the higher value added viscose rayon filament fabrics for summer textile products. In this study, we applied gallnut extract to the viscose rayon filament fabric to develop summer fabrics with natural color and multi-functions such as antibacterial and antioxidant properties. This process also pursue eco-friendly and multi-functional fabric finishing from the natural material "gallnut". In addition, various pre-treatment with cationizer, chitosan, or chito-oligomer was applied to the finishing process to improve the finishing efficacy and durability. Consequently, it was found that the active component of gallnut extract was successfully incorporated to the viscose rayon filament fabric through a pad-dry-cure process. And, the treated viscose rayon filament fabrics showed excellent antibacterial and antioxidant properties. Therefore, it was expected that the rayon filament fabrics treated by gallnut extract could be used as effective summer fabrics preventing the growth of bacteria and skin ageing as well as providing cool touch feeling. However, the pre-treatments were not that meaningful on the functionalities but effective on coloring.