• Journal of Chest Surgery
• /
• v.28 no.11
• /
• pp.1049-1053
• /
• 1995

Although neoplastic involvement of the pericardium is frequently present postmortem, cardiac manifestations before death are uncommon, and cardiac tamponade as the initial presentation of cancer is rare. We are presenting a metastatic pericardial tumor with cardiac tamponade of unknown primary neoplasm. The patient brought to hospital in a state of unconscious. The chest x-ray film showed cardiomegaly with a globular heart shape and right pleural effusion. We underwent an anterior thoracotomy and pericardial window was created. The histopathologic finding of pericardium, pleural and pericardial effusion show a metastatic adenocarcinoma. The patient subsequently received adjuvent radiotherapy and chemotherapy, but he expired on the postoperative 132 day.

• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.3
• /
• pp.127-132
• /
• 2014

The semi-solid metal forming process has been applied to realize a near-net shape fabrication of a high speed tool steel. A complicatedly shaped part out of SKH51 was successfully manufactured by introducing pertinent materials, tooling and processing conditions. A SKH51 billet with globular grains was heated at temperatures between 1300 and $1350^{\circ}C$ using high frequency induction heater to get semi-solid microstructure before high rate injection of mushy metal into a die cavity for the forming process. It was necessary to control the preheating of dies between 300 and $400^{\circ}C$ to maintain the homogeneous microstructure during the semi-solid metal forming process. Significant defects such as pores, high fraction of liquid fraction and segregation could be removed from the part by using air vents.

• Transactions of Materials Processing
• /
• v.10 no.3
• /
• pp.223-234
• /
• 2001

The characteristics of thixoforming process can decrease liquid segregation because of the improvement in fluidity in a globular microstructure state and utilizes flow without an air entrapment. Therefore, in order to obtain the sound parts of metal matrix composites by using thixoforming process which has co-existing solidus-liquidus phase, it is very important to design a die shape property and to obtain the fabrication conditions which affect the unifomity of the solid fraction on unfilling state and various defects throughout the fabricated parts. The die designs and fabrication conditions to obtain the good piston part are proposed for thixoforging process of metal matrix composites. When reheated metal matrix composites billets were transferred to the closed die gate, thixoforging were carried out under the various pressure(60, 80, 100MPa) with controled forging speed. The mechanical properties such as hardness and tensile strength for thixoforged parts have been investigated after T6 heat treatment.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.27 no.1
• /
• pp.29-42
• /
• 2001

We had prepared MLV liposome with Hibiscus Esculentus Ext.(HEE) which have fluorescent light in order to evaluate its percutaneous absorption about hairless rat skin. Then we investigated particle size of MLV using confocal laser scanning microscope(CLSM) and transmission electron microscope(TEM), respectively. Stability of MLV liposome and penetration of MLV liposome to hairless rat skin was measured by CLSM. As a result of experiments, MLV was globular shape and the rage of particle size was 0.3-0.5$\mu\textrm{m}$ mostly. Cream-type MLV had high stability comparatively. When we treated with MLV to rat skin, skin penetration was enhanced, especially, the optimum concentration of MLV on penetration to rat skin was 10%. Optimum penetration time was 6hr-12hr. And MLV-type HEE was more effective on percutaneous absorption than HEE-cream or liposome-type HEE.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.538-541
• /
• 1996

The flow of the molten drop in the GMAW was observed to explain the mechanism of its formation and break-up process. Fluid flew analysis was made with the assumption that the electrode wire acts like fluid, and it is shown how the convection of the drop inside affects its flow, from the formation to the break-up of the drop. In later part, the process of the spray mode development at high current is shown, as well as the one of the globular mode, by the fluid flow analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.4
• /
• pp.523-532
• /
• 1999

This study is aimed to obtain fundamental knowledge of pulse laser welding phenomena the authors investigated the structure and composition of evaporated particles of Al alloys in air and in the Ar atmosphere during pulsed laser welding. The ultra-fine particles of 5 to 100nm diameter in a globular or irregular shape were formed in laser-induced plasma and the main structure was $MgAl_2O_4$ The composition of particles was ifferent depending on the power density of a laser beam; namely under the low power density conditions magnesium was predominant in the parti-cles while aluminium content increased with an increase in the power density. These results were attributed to evaporation phenomena of metals with different boiling points and latent heats of vaporization. On the other hand the number density of laser-induced plasma species was obtained by Saha's equation. it was confirmed that the number density depends upon the plasma tempera-ture and total pressures.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.4
• /
• pp.185-191
• /
• 2010

To effectively utilize resources of reject ash and dredged soil, globular shape-formed artificial lightweight aggregate were manufactured in 8~10 mm size. Starting materials were changed various grading and composition, sintered at $1050{\sim}1250^{\circ}C$. The specific gravity, water absorptance of artificial lightweight aggregates were measured on the basis of the KS. In this study could make a prediction about application of bloating mechanism by ferrous materials and alkali/alkali-earth oxide at high temperature.

• Animal Systematics, Evolution and Diversity
• /
• v.28 no.3
• /
• pp.168-177
• /
• 2012

Two stichotrichid ciliates, collected from marine waters in Jeju Island, were identified as Afroamphisiella multinucleata Foissner et al., 2002 and Pseudokahliella marina (Foissner et al., 1982) Berger et al., 1985. They are recorded for the first time in Korea. The descriptions are based on examinations of living as well as protargol-impregnated specimens. These species are characterized as follows. Afroamphisiella multinucleata has a body size in vivo of $70-95{\times}20-35{\mu}m$; elongate rectangular in shape; contractile vacuole located slightly above mid-body. The adoral zone is bipartited into 3 distal and 13-17 proximal membranelles and occupies 28-35% of the body length. The frontal row comprises 1-4 cirri and one buccal cirrus. The amphisiellid median cirral row is composed of 14-21 cirri, 10-19 left marginal cirri, and 21-30 right marginal cirri. Cortical granules are yellowish. 11-20 globular/ellipsoidal macronuclear nodules arrange proximally along the cell margins. Pseudokahliella marina has a body size in vivo of $110-195{\times}40-110{\mu}m$ and broadly elliptical in shape. The adoral zone of the membranelles occupies 50-60% of the body length, and is composed of 41-70 membranelles. A prominent frontal scutum is present. The contractile vacuole is located below the mid-body. There are 11-13 frontoventral rows, including marginal rows. Caudal cirri and transverse cirri are absent. Three invariable non-fragmented bipolar dorsal kineties are present. The left and right marginal rows are composed of 22-35 and 28-40 cirri, respectively. Colourless cortical granules are present. 8-11 spherical/ellipsoidal macronuclear nodules are connected with each other by thread-like tructures, forming an inverted C-shape.

• Journal of Technologic Dentistry
• /
• v.37 no.1
• /
• pp.23-29
• /
• 2015

Purpose: The selective laser melting (SLM) process for dentistry, which is one of the additive manufacturing technologies (AM) allows for rapid production of a three-dimensional model with complex shape by directly melting metal powder. This process generates detailed items of a three-dimensional model shape through consolidation of a thin powder layer by utilizing both selective melting and laser beam simultaneously. In regard to SLM process, Fe-base powder, Ti-6AI-4V powder, AI-base powder, etc. have been researched. It is believed that the aforementioned technologies will be widely utilized in manufacturing metal parts using metal powder of raw material. This study chose Ni-Cr-Mo metal powder in order to manufacture metal powder materials that would be used in the selective laser melting for dentistry. Methods: This study manufactured metal powder using mechanical alloying technique (MA) among those metal powder manufacturing techniques. Moreover, this study aimed to utilize the metal powder manufactured after observing the characteristics of powder as preliminary data of Ni-Cr-Mo metal powder. This study could obtain the following conclusions within the experimental limitations. Results: As a result of mechanically alloying Ni-Cr-Mo powder over time, its mean particle size was $66.93{\mu}m$ $54.4{\mu}m$ and $45.39{\mu}m$ at 10h, 20h and 30h, respectively. The gtain form of metal powder by mechanical alloying technique was a sponge-like shape of irregular plate; however, the gtain form manufactured by high-pressure water aromization process had the following three types: globular type, chain type and oval type. Conclusion: This study found $37.65{\mu}m$ as the mean particle size of Ni-Cr-Mo metal powder, which was manufactured using water atomization technique under the following conditions: water atomization flux of 300 liter/min, hydraulic pressure of $400kgf/cm^2$ and injection angle of $45^{\circ}$. This study confirmed that the grain form of powder (solid particle form) would vary depending on the manufacturing process.

• Korean journal of food and cookery science
• /
• v.7 no.2
• /
• pp.7-18
• /
• 1991

This study was experimented saccharification process added malt extract solution into cooked sweet potato and potato with time, temperature and was tested reducing sugar changes, structural changes, pH and sensory evaluation about cooked shik-hae of rice, glutinous rice, potato, sweet potato. The results are summarized as follows: 1. Enzyme activity was highest in malt after four days of barley germination at a room temperature. 2. Electronmicroscopic observation indicated that raw starch granule of potato and that of sweet potato was 25-60$\mu\textrm{m}$ and 8~18$\mu\textrm{m}$ in size, respectively and its shape is oval and globular for potato and sweet potato respectively. 3. Reducing sugars were 1,682.6mg and 1,695.6mg in rice and glutinous rice, respectively, for 6-hour-saccharification at $50^{\circ}C$. Reducing sugars were 1,689.1mg and 1,497.8mg in sweet potato, potato, respectively, for 6.hour-saccharification at $60^{\circ}C$. 4. pH variation during saccharification for sweet potato and potato was pH 5.8~5.4. 5. Sensory evalution showed that there were more significant differences in sweety odor, roasted nutty taste and sweety taste of sweet potato among four samples than the other's color shininess.