• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.188-189
• /
• 2006

• 대한치과보철학회지
• /
• 제38권1호
• /
• pp.26-37
• /
• 2000

The purpose of this study was to investigate the effect that three resin indexing materials had on the distortion of split cast in the procedures of solder indexing and block fabrication. The specimen had two cylinders and connecting bar Two cylinders were a reference cylinder and a test cylinder that were machined precisely and placed on metal base. The total of specimens were 30 and they were divided into 3 groups according to the resin indexing materials : Acrylic $solder^{(R)}$, G-C Pattern $resin^{(R)},\;Z-100^{(R)}$. The relative coordinates (X, Y, Z) of centroids of both cylinders were measured by using 3-D cool dinates measuring machine. The value of indexing distortion was obtained after application of indexing material, and the value of the block distortion was obtained after fabrication of soldering block, and the value of total distortion was a value sum of indexing distortion and block distortion. Intercentroidal linear distortion ${(\sqrt{X^{'2}+Y^{'2}+Z^{'2}}-{\sqrt{X^2+Y^2+Z^2)}$ and global distortion $(\sqrt{{(X^'-X)}^2+{(Y^'-Y)}^2+{(Z^'-Z)}^2}$ were calculated from data of coordinates of centroids at each measuring stages. The results of this study were as belows ; 1. The intercentroidal distance between the split casts was reduced by indexing distortion and increased by block distortion. 2. The indexing global distortion between the split casts was smaller than block global distortion. 3. The intercentroidal linear distortion and the global distortion were no significant difference between indexing materials.

• 대한토목학회논문집
• /
• 제14권5호
• /
• pp.1209-1217
• /
• 1994

본 연구는 WGS84 타원체와 Bessel 타원체간의 측지좌표계 변환의 확립을 위해 매개변환요소에 따른 타원체 간의 좌표변환체계틀 정립, 남한지역에 고루 분포된 15개 천문점에 대한 GPS 관측자료를 토대로 위성관측에 의한 Geoid 고를 산정하고 좌표변환을 위한 매개변수를 3-, 4-, 6- 및 7-변환요소로 도출하여 각 요소별로 변환특성을 고찰하고 DMA에서 제시된 변환요소의 결과와 함께 지도투영에 적용하므로서 국내에 적합한 변환계수를 제시한 것이다.

• 대한공간정보학회지
• /
• 제22권4호
• /
• pp.127-133
• /
• 2014

본 연구는 2007년 이래 국토지리정보원에서 제공하고 있는 Network-RTK(VRS) 측량을 항공사진도화에 필요한 지상기준점측량에 적용하기 위하여 그 정확도를 검증하는데 목적이 있다. 세계측지계(ITRF2000)에 근거하여 국가기준점을 고정한 상대측위방식 Static GNSS 측량으로 지상기준점(GCP)을 측정하여 이를 정확값으로 간주하였다. 2종의 Network-RTK 수신기를 이용하여 동일 지상기준점의 위치를 구한 후, 좌표변환과 지오이드 모델을 적용하여 세계측지계 좌표로 변환하였다. Static GNSS 측량과 2종의 Network-RTK 측량에 의한 측정값을 비교한 결과, GCP 위치좌표의 평균제곱근오차는 평면에서 ${\pm}2.0cm$, 표고에서 ${\pm}7.0cm$ 이었다. 즉, 지상기준점측량에서 GPS 수신기 1세트로 짧은 시간 관측할 수 있는 Network-RTK 측량은 GNSS 수신기 2세트 이상을 필요로 하는 RTK 측량이나 GNSS 수신기 2세트 이상으로 장시간의 관측이 필요한 Static GNSS 측량의 실용적인 대안임을 알 수 있었다.

• 한국정보통신학회논문지
• /
• 제25권6호
• /
• pp.799-806
• /
• 2021

정합은 고유 좌표를 가지고 있는 점군을 전역 좌표로 변환하는 과정이다. 지역 정합은 계산 시간이 오래 걸리고 대략적인 위치를 맞춘 후 정밀 정합을 수행하고, 전역 정합은 정합에 이용할 대응점을 계산하고 한 번에 정합하기 때문에 일반적으로 지역 정합법에 비해 속도가 빠르고, 초기 위치에도 상관이 없다. 전역 정합 방법 중 고속 전역 정합법은 성능이 우수하여 많이 사용하는 방법 중 하나이다. 하지만 정합 정밀도와 속도를 높이기 위해서는 많은 매개변수가 필요하다. 본 논문에서는 이와 같은 매개변수들을 분석하고 실험하여 실제 정합 시 유효하게 작용하는 매개변수를 제안한다. 제안한 결과는 고속 전역 정합법을 활용해야 하는 경우 방향 설정에 도움이 될 것이다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.683-686
• /
• 2005

This study addresses a photogrammetric approach to generate Mars topographic products from mapping data of Mars Global Surveyor (MGS). High-resolution stereo images and laser altimetry data collected from the MGS mission are combined and processed to produce Digital Elevation Models (DEM) and orthoimages. First, altimeter data is registered to high resolution images and considerable registration offset (around 325 m) is discovered on high resolution stereo images. Altimetry data, exterior orientation elements of the camera and conjugate points are used for bundle adjustment to solve this mis-registration and detennine the ground coordinates. The mis-registration of altimetry data are effectively eliminated after the bundle adjustment. Using the adjusted exterior orientation the ground coordinates of conjugate points are detennined. A sufficient number of corresponding points collected through image matching and their precise 3-D ground coordinates are used to generate DEM and orthoimages. A posteriori standard deviations of ground points after bundle adjustment indicate the accuracy of OEM generated in this study. This paper addresses the photogrammetric procedure: the registration of altimetry data to stereo pair images, the bundle adjustment and the evaluation, and the generation of OEM and orthoimages.

• 한국측량학회지
• /
• 제11권2호
• /
• pp.27-34
• /
• 1993

정확하고 경제성 있는 지형정보의 구축은 각종 건설공사를 비롯한 국토종합개발에 기본 요건으로서 그 중요성이 강조되고 있다. 본 연구에서는 남한 지역을 대상으로 하는 광역망과 충남·북 일원의 지역망내, 1, 2 등 삼각점에 대한 GPS 관측을 수행하여 WGS 84 좌표를 조정·산출하고 Bessel 타원체 상의 좌표로 변환하기 위한 변환계수론 Bessel Geoid Undulation을 고려한 7-Parameter 변환기법으로 도출하므로서, GPS에 의한 정밀 3차원 지형정보의 획득은 물론, 순변환된 성과와 역변환된 성과에 각각 T.M. 및 U.T.M 투영도법을 적용하여 정밀 지도제작을 위한 기본 자료의 산출 가능성을 제시코자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권3호
• /
• pp.246-255
• /
• 1997

The wave washer springs are expected to behave non-linearly between forces and displace¬ments due to contractions of the height and due to expansions in radial direction. To find out the non -linearity of wave washer springs, the three dimensional plate analysis theory using the finite element method is adopted in this paper. The wave washer springs are considered to be three dimensional plate structures rather than frame structures, because their thickness is normally much smaller than their width. The displacements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displacements are added to X - Y Z coordinates of nodal points. The new stiffness matrix of the system using the new coordinates of nodal points is adopted to calculate the another nodal displacements, that is, the step by step method is used in this paper. The relations between the increments of forces and displacements in each step are recorded and plotted in chart. The experimental results are compared with the calculated chart and it is shown that there are good coincidences between measured values and calculated ones.

• Journal of Computing Science and Engineering
• /
• 제4권3호
• /
• pp.207-224
• /
• 2010

This paper presents a compression scheme for mesh geometry, which is suitable for mobile graphics. The main focus is to enable real-time decoding of compressed vertex positions while providing reasonable compression ratios. Our scheme is based on local quantization of vertex positions with mesh partitioning. To prevent visual seams along the partitioning boundaries, we constrain the locally quantized cells of all mesh partitions to have the same size and aligned local axes. We propose a mesh partitioning algorithm to minimize the size of locally quantized cells, which relates to the distortion of a restored mesh. Vertex coordinates are stored in main memory and transmitted to graphics hardware for rendering in the quantized form, saving memory space and system bus bandwidth. Decoding operation is combined with model geometry transformation, and the only overhead to restore vertex positions is one matrix multiplication for each mesh partition. In our experiments, a 32-bit floating point vertex coordinate is quantized into an 8-bit integer, which is the smallest data size supported in a mobile graphics library. With this setting, the distortions of the restored meshes are comparable to 11-bit global quantization of vertex coordinates. We also apply the proposed approach to compression of vertex attributes, such as vertex normals and texture coordinates, and show that gains similar to vertex geometry can be obtained through local quantization with mesh partitioning.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.504-513
• /
• 1999

Usually bellows are designed for the purpose of absorbing axial movement. To find out axial stiffness of bellows the axisymmetric shell theory using the finite element method is adopted in this paper. Bellows can be idealised by series of conical frustum-shaped elements because it is axisymmetric shell structure. The force required to deflect bellows axilly is a function of the dimensions of the bellows and the materials from which they are made. The displancements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displacements are added to r-z cylinderical coordinates of nodal points. The new stiffness matrix of the system using the new coordinates of nodal points is adopted to calculate the another increments of nodal dis-placements that is the step by method is used in this paper. spring constant is analyzed according to the changing geometric factors of u-shaped bellows. The FEM results were agreed with experiment. Using developed FORTRAN PROGRAM spring constant can be predicted by input of a few factors.