• Mass Spectrometry Letters
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2019

Amphetamine-type stimulants (ATS) are a group of ${\beta}$-phenethylamine derivatives that produce central nervous system stimulants effects. The representative ATS are methamphetamine and 3, 4-methylenedioxymethamphetamine (MDMA), and abuse of ATS has become a global problem. Methamphetamine is abused in North America and Asia, while amphetamine and 3, 4-methyle nedioxym ethamphetamine (Ecstasy) are abused in Europe and Australia. Methamphetamine is also the most abused drug in Korea. In addition to the conventional ATS, new psychoactive substances (NPS) including phenethylamines and synthetic cathinones, which have similar effects and chemical structure to ATS, continue to spread to the global market since 2009, and more than 739 NPS have been identified. For the analysis of ATS, two tests that have different theoretical principles have to be conducted, and screening tests by immunoassay and confirmatory tests using GC/MS or LC/MS are the global standard methods. As most ATS have a chiral center, enantiomer separation is an important point in forensic analysis, and it can be conducted using chiral derivatization reagents or chiral columns. In order to respond to the growing drug crime, it is necessary to develop a fast and efficient analytical method.

• Corrosion Science and Technology
• /
• v.23 no.2
• /
• pp.145-153
• /
• 2024

In the automotive industry, the hole expanding test is widely used to assess the formability of punched holes in sheets. This test provides a good representation of formability within the framework defined by the ISO 16630 standard. During hole expanding tests on galvanized high strength steels, a negative effect was observed when there was a delay between hole punching and expansion, as compared to performing both operations directly. This effect is believed to be caused by hydrogen aging, which occurs when hydrogen diffuses towards highly-work hardened edges. Therefore, the aim of this study is to demonstrate the migration of hydrogen towards work-hardened edges in high strength Zn-coated steel sheets using a novel Thermal Desorption Analyzer (TDA) designed for small samples. This newly-developed TDA setup allows for the quantification of local diffusible hydrogen near cut edges. With its induction heating and ability to analyze Zn-coated samples while reducing artifacts, this setup offers flexible heat cycles. Through this method, a hydrogen gradient is observed over short distances in shear-cut galvanized steel sheets after a certain period of time following punching.

• Journal of Distribution Science
• /
• v.22 no.5
• /
• pp.39-57
• /
• 2024

Purpose: Various policies continue to be strengthened to develop Micro, Small and Medium Enterprises (MSMEs), which have a strategic role in the economy through the pillars of corporatization, capacity and financing to support strong and inclusive economic growth. Efforts to transform MSMEs marketing strategies are undertaken through eco-friendly digitalization to increase resilience and more productive and innovative capacity. Research design, data and methodology: This research is an exploratory qualitative approach taken to investigate the transformation of eco-friendly marketing strategies for MSMEs to increase competitiveness at the global level. The samples obtained were 425 MSMEs assisted by the DKI Jakarta, Bali, Java, Borneo, and Sumatera. The data collection technique used non-probability sampling (snowball sampling). Data is analyzed through collection, reduction, analysis, validity testing, presentation and conclusion. Results: This research shows the transformation of eco-friendly digital-based MSME marketing strategies occurred through four stages, namely production and institutional activities, expanding market share, digitalization and financing, and export market access. Conclusions: Eco-friendly digital transformation allows MSMEs competencies to be refined to improve business processes and business competitiveness at the international level. The contribution of this marketing strategy transformation is expanding MSMEs access to financial institutions (fintech), marketplaces, and QRIS (QR Code Indonesian Standard) digital payments.

• International Journal of High-Rise Buildings
• /
• v.13 no.1
• /
• pp.97-102
• /
• 2024

In this paper, we would like to share our ongoing research on global population and demographic shifts and the corresponding need for diverse responses. As population growth varies worldwide, the pressing issue is the current global housing shortage. The USA alone lacks 4 million homes, underlining the urgency for new construction and renewal of existing. Our focus is primarily on new building processes, which must also incorporate elements of renewal for future sustainability. Our research addresses several key questions: How will roles for construction professionals change? What should be the primary goal of the design process? What types of technologies are currently available, and which aspects of the process can be enhanced with AI? A significant part of our study is exploring sustainable building methods that reduce embodied carbon and increase speed of construction. Our goal is to extend the transition from smart homes to cities, analyzing the evolution towards smart communities and cities. A critical aspect of our research is the 'kit of parts concept, involving prefabrication and modular construction. This approach is essential for both rebuilding and new projects, potentially lowering costs in manufacturing and design for long term. Lastly, we present a detailed comparison of the construction industry with manufacturing.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1629-1635
• /
• 2011

Because LRT project is large infrastructure projects investing enormous budget and required continuous maintenance after construction, it is the global trend to perform business in terms of life-cycle from the initial construction, operation to disposal. It is very important LRT to manage interfaces efficiently and to integrate vehicle, civil, track, electricity, communications, signals, operations, facilities organically. Global companies of the railway developed countries including Europe are getting orders a large rail project and preempting the world market based on engineering technology. But, domestic LRT systems engineering is the subcontracting level to the lack of practical skills and experience. Thus, technology securement is very urgent for the independence of systems engineering technology and overseas advance based turnkey. In this paper, we are going to study applicable systems engineering technology focusing on LRT system based on international standard ISO/IEC 15288.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.9
• /
• pp.818-826
• /
• 2002

Since multipath phenomenon frequently occurs when a Global Positioning System receiver is placed in urban area crowded with large buildings, efficient mitigation of multipath effects is necessary to resolve. In this paper, we propose a new multipath detection technique that is useful in real-time positioning with a general Global Positioning System receiver. The proposed technique is based on a channelwise multipath test statistic that efficiently indicates the degree of fluctuations induced by multipath error. The proposed multipath test statistic is operationally advantageous because it does not require any specialized hardware nor any pre-computation of receiver position, it is directly related to standard $\chi$$^2$-distributions, and it can adjust the detection resolution by increasing the number of successive measurements. Simulation and experiment results verify the performance of the proposed multipath detection technique.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.13-16
• /
• 2005

It would be desirable to have methods for specific problems, which have low communication costs compared to the computation costs, and in specific applications, algorithms need to be developed and mapped onto parallel computer architectures. Main memory access for shared memory system or global communication in message passing system deteriorate the computation speed. In this paper, it is found that the m-step generalization of the block Lanczos method enhances parallel properties by forming m simultaneous search direction vector blocks. QR factorization, which lowers the speed on parallel computers, is not necessary in the m-step block Lanczos method. The m-step method has the minimized synchronization points, which resulted in the minimized global communications compared to the standard methods.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.10
• /
• pp.1298-1302
• /
• 2018

Minimum Efficiency Performance Standard (MEPS) has already been operated in many countries. In particular, the European Union (EU) has entered the IE3 stage since 2017. Korea will also enter the IE3 phase from October 2018. As for Korea, there is still a restriction on induction motors only. But, in the EU and the United States, efficiency regulation of variable speed drives is being deeply examined. Standards related to this are gradually being fixed. In this paper, the current status and the direction of global standards related to the efficiency of motors, inverters and systems are reviewed. And the case of improving the efficiency of the system including the motor will be examined.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.24 no.4
• /
• pp.70-80
• /
• 2016

ICAO(International Civil Aviation Organization) established ICAO LPRs(Language Proficiency Requirements) which is an international standard of English for aviation to promote the aviation safety. The Republic of Korea government amended the aviation law on the 8th of November, 2005 and made EPTA(English Proficiency Test for Aviation) as a follow up action. Purpose of this research is analysing the problem of EPTA and improving it. This investigation takes a look at the current ICAO LPRs and compares the difference between EPTA and other global English proficiency requirements for aviation. The result indicated that there is a discordance between the standards of ICAO and EPTA. Also, the global English proficiency reqirements for aviation and EPTA had differences which required improvements. The study suggests to replace more job relevant questions in the EPTA and reform the level system of EPTA.

• Structural Engineering and Mechanics
• /
• v.66 no.4
• /
• pp.543-555
• /
• 2018

Fiber Reinforced Polymer (FRP), which has a high strength to weight ratio, are now regularly used for strengthening of deficient reinforced concrete (RC) structures. While various researches have been conducted on FRP strengthening, an area that still requires attention is predicting the debonding failure load of prestressed FRP strengthened RC beams. Application of prestressing increases the capacity and reduces the premature failure of the beams largely, though not entirely. Few analytical methods are available to predict the failure loads under flexure failure. With this paucity, this research proposes a method for predicting debonding failure induced by intermediate crack (IC) for prestressed FRP-strengthened beams. The method consists of a numerical study on beams retrofitted with prestressed FRP in the tension side of the beam. The method applies modified Branson moment-curvature analysis together with the global energy balance approach in combination with fracture mechanics criteria to predict failure load for complicated IC-induced failure. The numerically simulated results were compared with published experimental data and the average of theoretical to experimental debonding failure load is found to be 0.93 with a standard deviation of 0.09.